Commit Graph

18 Commits

Author SHA1 Message Date
Marius Strobl
20284fcdd9 Add a driver for Schizo' Fireplane/Safari to PCI 2.1 and Tomatillo'
JBus to PCI 2.2 bridges. In theory, this driver should also handle
`XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access
to such hardware, support for these hasn't be fleshed out, yet.
2008-09-28 00:07:05 +00:00
Marius Strobl
3aeb70f799 Revert this part of r183203 which wasn't meant to be committed, yet. 2008-09-20 11:46:07 +00:00
Marius Strobl
794748e37a Remove duplicate entry accidentally introduced with r183202. 2008-09-20 11:34:18 +00:00
Marius Strobl
898112a7dc cosmetic changes and style fixes 2008-08-22 20:28:19 +00:00
Marius Strobl
65deb9d947 - In sunkbd_probe_keyboard() don't bother to determine the keyboard layout
as we have no use for that info. Instead let this function return the
  keyboard ID and verify at its invocation in sunkbd_configure() that we're
  talking to a Sun type 4/5/6 keyboard, i.e. a keyboard supported by this
  driver.
- Add an option SUNKBD_EMULATE_ATKBD whose code is based on the respective
  code in ukbd(4) and like UKBD_EMULATE_ATSCANCODE causes this driver to
  emit AT keyboard/KB_101 compatible scan codes in K_RAW mode as assumed by
  kbdmux(4). Unlike UKBD_EMULATE_ATSCANCODE, SUNKBD_EMULATE_ATKBD also
  triggers the use of AT keyboard maps and thus allows to use the map files
  in share/syscons/keymaps with this driver at the cost of an additional
  translation (in ukbd(4) this just is the way of operation).
- Implement an option SUNKBD_DFLT_KEYMAP, which like the equivalent options
  of the other keyboard drivers allows to specify the default in-kernel
  keyboard map. For obvious reasons this made to only work when also using
  SUNKBD_EMULATE_ATKBD.
- Implement sunkbd_check(), sunkbd_check_char() and sunkbd_clear_state(),
  which are also required for interoperability with kbdmux(4).
- Implement K_CODE mode and FreeBSD keypad compose.
- As a minor hack define KBD_DFLT_KEYMAP also in the !SUNKBD_EMULATE_ATKBD
  case so we can obtain fkey_tab from <dev/kbd/kbdtables.h> rather than
  having to duplicate it and #ifdef some more code.
- Don't use the TX-buffer for writing the two command bytes for setting the
  keyboard LEDs as this consequently requires a hardware FIFO that is at
  least two bytes in depth, which the NMOS-variant of the Zilog SCCs doesn't
  have. Thus use an inlined version of uart_putc() to consecutively write
  the command bytes (a cleaner approach would be to do this via the soft
  interrupt handler but that variant wouldn't work while in ddb(4)). [1]
- Fix some minor style(9) bugs.

PR:		90316 [1]
Reviewed by:	marcel [1]
2006-11-02 00:01:15 +00:00
Marius Strobl
c2722b8fcf - Hook up atkbdc(4), atkbd(4) and psm(4) to the sparc64 build, not
enabled in GENERIC by default, yet.
- While here remove the exclusion of ukbd(4) from the sparc64 NOTES
  as ukbd(4) compiles and works on sparc64.
2005-06-10 20:58:59 +00:00
Marius Strobl
912dd06aed For sparc64 conditionalize the compilation of the gfb_cursor() variant
which doesn't assume a hardware cursor on __sparc64__ rather than on
DEV_CREATOR. If we want to include more than one framebuffer driver in
e.g. the GENERIC kernel all drivers have to work the same way. Now that
DEV_CREATOR is no longer used remove it from options.sparc64.
2005-05-21 20:15:14 +00:00
David E. O'Brien
a82b25f9b2 Better OFW console support on Sun Ultra2 machines.
Ultra2 users may want to set OFWCONS_POLL_HZ to a value of '20'.
I have left default value at '4' as higher values can consume a more
than is acceptable amount of CPU, and we don't have a consensus yet
what is an optimal value.

Submitted by:	Pyun YongHyeon <yongari@kt-is.co.kr>
2004-06-24 02:57:11 +00:00
Marius Strobl
66a79ac95d - Remove the old sparc64 OFW PCI code (as opposed to the former
"options OFW_NEWPCI").
  This is a bit overdue, the new sparc64 OFW PCI code which is
  meant to replace the old one is in place for 10 months and
  enabled by default in GENERIC for 8 months. FreeBSD 5.2 and
  5.2.1 also shipped with the new code enabled by default.
- Some minor clean-up, e.g. remove functions that encapsulated
  the #ifdefs for OFW_NEWPCI, remove unused resp. no longer
  required includes, etc.

Approved by:	tmm, no objections on freebsd-sparc64
2004-05-08 13:53:47 +00:00
Thomas Moestl
6882e9a266 Remove the EBUS_DEBUG and IOMMU_DEBUG options, which are not used any
more.
2004-04-30 15:21:25 +00:00
Jake Burkholder
e16255d3f0 Hook syscons and the creator driver up to the sparc64. This compiles but
will not link due to missing keyboard drivers.
2003-08-24 01:54:06 +00:00
Thomas Moestl
1d80cb1b37 Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI
for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI
bridge driver. By utilizing these, the PCI handling is much more elegant
now.

The advantages of the new approach are:
- Device enumeration should hopefully be more like on Solaris now,
  so unit numbers should match what's printed on the box more
  closely.
- Real interrupt routing is implemented now, so cardbus bridges
  etc. have at least a chance to work.
- The quirk tables are gone and have been replaced by (hopefully
  sufficient) heuristics.
- Much cleaner code.

There was also a report that previously bogus interrupt assignments
are fixed now, which can be attributed to the new heuristics.

A pitfall, and the reason why this is not the default yet, is that
it changes device enumeration, as mentioned above, which can make
it necessary to change the system configuration if more than one
unit of a device type is present (on a system with two hme cars,
for example, it is possible that hme0 becomes hme1 and vice versa
after enabling the option). Systems with multiple disk controllers
may need to be booted into single user (and require manual specification
of the root file system on boot) to adjust the fstab.
Nevertheless, I would like to encourage users to use this option,
so that it can be made the default soon.

In detail, the changes are:
- Introduce an OFW PCI bus driver; it inherits most methods from the
  generic PCI bus driver, but uses the firmware for enumeration,
  performs additional initialization for devices and firmware-specific
  interrupt routing. It also implements an OFW-specific method to allow
  child devices to get their firmware nodes.
- Introduce an OFW PCI-PCI bridge driver; again, it inherits most
  of the generic PCI-PCI bridge driver; it has it's own method for
  interrupt routing, as well as some sparc64-specific methods (one to
  get the node again, and one to adjust the bridge bus range, since
  we need to reenumerate all PCI buses).
- Convert the apb driver to the new way of handling things.
- Provide a common framework for OFW bridge drivers, used be the two
  drivers above.
- Provide a small common framework for interrupt routing (for all
  bridge types).
- Convert the psycho driver to the new framework; this gets rid of a
  bunch of old kludges in pci_read_config(), and the whole
  preinitialization  (ofw_pci_init()).
- Convert the ISA MD part and the EBus driver to the new way
  interrupts and nodes are handled.
- Introduce types for firmware interrupt properties.
- Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only
  required for PCI), and move it to a more correct location (new
  support methodsx were also added, and an old one was deprecated).
- Fix a bunch of minor bugs, perform some cleanups.

In some cases, I introduced some minor code duplication to keep the
new code clean, in hopes that the old code will be unifdef'ed soon.

Reviewed in part by:	imp
Tested by:	jake, Marius Strobl <marius@alchemy.franken.de>,
		Sergey Mokryshev <mokr@mokr.net>,
		Chris Jackman <cjackNOSPAM@klatsch.org>
Info on u30 firmware provided by:	kris
2003-07-01 14:52:47 +00:00
Thomas Moestl
504f8e7cb9 Remove the PSYCHO_STRAY option - it was never really useful. Adjust a
nearby comment. PSYCHO_DEBUG remains, as it is quite useful for
debugging interrupt routing problems.
2003-06-12 15:00:34 +00:00
Juli Mallett
5f07565bcb Move SHOW_BUSYBUFS and PANIC_REBOOT_WAIT_TIME into the MI options file, since
MI code uses them, and every platform provides them (except x86_64 whose
options file was lacking one).

Reviewed by:	bde, rwatson
2002-11-18 06:17:07 +00:00
Jake Burkholder
76cf1369d7 Add a DEBUGGER_ON_POWERFAIL option. This makes the power button on ultra 10s
work like an NMI button.
2002-03-13 05:58:45 +00:00
Jake Burkholder
b450bd2a37 Add PMAP_STATS option so pmap.c compiles. 2002-02-23 22:35:57 +00:00
Thomas Moestl
79327ed19c Add entries for the recently committed code. 2001-11-09 20:44:44 +00:00
Jake Burkholder
d2734d58ab Add a Makefile, ldscript, and config magic for sparc64. This is tailored
to build with a cross compiler alongside the standard compiler; it would be
more desirable to build in a chroot.
2001-08-03 01:09:10 +00:00