Commit Graph

1104 Commits

Author SHA1 Message Date
Alexander V. Chernikov
bdf942c3f0 Revert r234834 per luigi@ request.
Cleaner solution (e.g. adding another header) should be done here.

Original log:
  Move several enums and structures required for L2 filtering from ip_fw_private.h to ip_fw.h.
  Remove ipfw/ip_fw_private.h header from non-ipfw code.

Requested by:      luigi
Approved by:       kib(mentor)
2012-05-03 08:56:43 +00:00
Alexander V. Chernikov
7bd5e9b143 Move several enums and structures required for L2 filtering from ip_fw_private.h to ip_fw.h.
Remove ipfw/ip_fw_private.h header from non-ipfw code.

Approved by:        ae(mentor)
MFC after:          2 weeks
2012-04-30 10:22:23 +00:00
Jung-uk Kim
eef1b955be Merge ACPICA 20120420. 2012-04-23 23:05:14 +00:00
Dimitry Andric
a511762672 Fix the following compilation warnings in sys/contrib/rdma/rdma_cma.c:
sys/contrib/rdma/rdma_cma.c:1259:8: error: case value not in enumerated type 'enum iw_cm_event_status' [-Werror,-Wswitch]
	      case ECONNRESET:
		   ^
  @/sys/errno.h:118:20: note: expanded from macro 'ECONNRESET'
  #define ECONNRESET      54              /* Connection reset by peer */
		      ^
  sys/contrib/rdma/rdma_cma.c:1263:8: error: case value not in enumerated type 'enum iw_cm_event_status' [-Werror,-Wswitch]
	      case ETIMEDOUT:
		   ^
  @/sys/errno.h:124:19: note: expanded from macro 'ETIMEDOUT'
  #define ETIMEDOUT       60              /* Operation timed out */
		      ^
  sys/contrib/rdma/rdma_cma.c:1260:8: error: case value not in enumerated type 'enum iw_cm_event_status' [-Werror,-Wswitch]
	      case ECONNREFUSED:
		   ^
  @/sys/errno.h:125:22: note: expanded from macro 'ECONNREFUSED'
  #define ECONNREFUSED    61              /* Connection refused */
		      ^

This is because the switch uses iw_cm_event::status, which is an enum
iw_cm_event_status, while ECONNRESET, ETIMEDOUT and ECONNREFUSED are
just plain defines from errno.h.

It looks like there is only one use of any of the enumeration values of
iw_cm_event_status, in:

  sys/contrib/rdma/rdma_iwcm.c: 	if (iw_event->status == IW_CM_EVENT_STATUS_ACCEPTED) {

So messing around with the enum definitions to fix the warning seems too
disruptive; the simplest fix is to cast the argument of the switch to
int.

Reviewed by:	kmacy
MFC after:	1 week
2012-04-20 21:52:57 +00:00
Andrey V. Elsukov
59894e4a44 Fix VIMAGE build. 2012-04-05 04:41:06 +00:00
Gleb Smirnoff
07b6b55dce Merge from OpenBSD:
revision 1.173
  date: 2011/11/09 12:36:03;  author: camield;  state: Exp;  lines: +11 -12
  State expire time is a baseline time ("last active") for expiry
  calculations, and does _not_ denote the time when to expire.  So
  it should never be added to (set into the future).

  Try to reconstruct it with an educated guess on state import and
  just set it to the current time on state updates.

  This fixes a problem on pfsync listeners where the expiry time
  could be double the expected value and cause a lot more states
  to linger.
2012-04-04 14:47:59 +00:00
Gleb Smirnoff
64484cf630 Since pf 4.5 import pf(4) has a mechanism to defer
forwarding a packet, that creates state, until
pfsync(4) peer acks state addition (or 10 msec
timeout passes).

This is needed for active-active CARP configurations,
which are poorly supported in FreeBSD and arguably
a good idea at all.

Unfortunately by the time of import this feature in
OpenBSD was turned on, and did not have a switch to
turn it off. This leaked to FreeBSD.

This change make it possible to turn this feature
off via ioctl() and turns it off by default.

Obtained from:	OpenBSD
2012-04-03 18:09:20 +00:00
Jung-uk Kim
3f8d720f87 MFV: r233615
Revert r233555 and apply a fix for the reference counting regressions.

Tested by:	andreast, lme, nwhitehorn,
		Sevan / Venture37 (venture37 at gmail dot com)
Submitted by:	Robert Moore (robert dot moore at intel dot com)
2012-03-28 17:21:59 +00:00
Jung-uk Kim
c708f80e7d MFV: r233551
Fix two possible memory leaks in error path.

Obtained from:	ACPICA
2012-03-27 15:27:20 +00:00
Jung-uk Kim
f19ebc89a3 MFV: r233550
Temporarily revert an upstream commit.  This change caused regressions for
too many laptop users.  Especially, automatic repair for broken _BIF caused
strange reference counting issues and kernal panics.  This reverts:

c995fed15a
2012-03-27 15:15:30 +00:00
Bernhard Schmidt
74ebfba7ca Update the firmware to version 0.236
Submitted by:	PseudoCylon
MFC after:	2 weeks
2012-03-21 19:09:52 +00:00
Jung-uk Kim
4c52cad2f9 Merge ACPICA 20120320. 2012-03-20 21:37:52 +00:00
Bernhard Schmidt
fd5c6edb78 Import the latest microcode.h which was used to generate the current
firmware files and adjust the Makefile.

Obtained from:	OpenBSD
2012-03-14 08:00:33 +00:00
Bernhard Schmidt
b1866dfea3 Update the rt2860's firmware and add a Makefile for the module. While
here remove the ucode header file which was used to generate the fw files
but by now is outdated.

Reviewed by:	ray
Obtained from:	OpenBSD
2012-03-13 21:25:25 +00:00
Juli Mallett
964fdce070 Remove some files not used by the FreeBSD kernel which have been adding quite
a bit of bloat to the kernel source tree's size.
2012-03-13 06:48:26 +00:00
Juli Mallett
b5acc0d618 Disable the Simple Executive's error decoding/reporting code. 2012-03-11 06:55:17 +00:00
Juli Mallett
9261550cf3 Do not try to use libfdt in FreeBSD. 2012-03-11 06:49:31 +00:00
Juli Mallett
57a8a8ff31 Remove files not needed by FreeBSD. 2012-03-11 06:18:38 +00:00
Juli Mallett
dc4ee6ca91 Merge the Cavium Octeon SDK 2.3.0 Simple Executive code and update FreeBSD to
make use of it where possible.

This primarily brings in support for newer hardware, and FreeBSD is not yet
able to support the abundance of IRQs on new hardware and many features in the
Ethernet driver.

Because of the changes to IRQs in the Simple Executive, we have to maintain our
own list of Octeon IRQs now, which probably can be pared-down and be specific
to the CIU interrupt unit soon, and when other interrupt mechanisms are added
they can maintain their own definitions.

Remove unmasking of interrupts from within the UART device now that the
function used is no longer present in the Simple Executive.  The unmasking
seems to have been gratuitous as this is more properly handled by the buses
above the UART device, and seems to work on that basis.
2012-03-11 06:17:49 +00:00
Gleb Smirnoff
0e2fe5f990 Merge from OpenBSD:
revision 1.146
  date: 2010/05/12 08:11:11;  author: claudio;  state: Exp;  lines: +2 -3
  bzero() the full compressed update struct before setting the values.
  This is needed because pf_state_peer_hton() skips some fields in certain
  situations which could result in garbage beeing sent to the other peer.
  This seems to fix the pfsync storms seen by stephan@ and so dlg owes me
  a whiskey.

I didn't see any storms, but this definitely fixes a useless memory
allocation on the receiving side, due to non zero scrub_flags field
in a pfsync_state_peer structure.
2012-03-08 09:20:00 +00:00
Bjoern A. Zeeb
9dba179d5e IFC @231845
Sponsored by:	Cisco Systems, Inc.
2012-02-17 00:27:48 +00:00
Jung-uk Kim
a159c266a9 Merge ACPICA 20120215. 2012-02-16 22:59:29 +00:00
Bjoern A. Zeeb
0e2181f578 Extend IPv6 routing lookups in pf(4) to use the new multi-FIB KPI.
Try to make the "rtable" handling work but the current version of
pf(4) does not fully support it yet as especially callers of
PF_MISMATCHAW() are not fully FIB-aware.  OpenBSD seems to have
fixed this in a later version.  Prepare as much as possible.

Sponsored by:	Cisco Systems, Inc.
2012-02-03 13:20:48 +00:00
Gleb Smirnoff
3a8c7fa008 Allocate our mbuf with m_get2(). 2012-01-17 12:14:26 +00:00
Ulrich Spörlein
1eb6fc2b27 Remove spurious 8bit chars, turning files into plain ASCII. 2012-01-15 13:23:54 +00:00
Christian S.J. Peron
5646ad6d27 Revert to the old behavior of allocating table/table entries using
M_NOWAIT.  Currently, the code allows for sleeping in the ioctl path
to guarantee allocation.  However code also handles ENOMEM gracefully, so
propagate this error back to user-space, rather than sleeping while
holding the global pf mutex.

Reviewed by:	glebius
Discussed with:	bz
2012-01-14 22:51:34 +00:00
Oleksandr Tymoshenko
234f7fd5a3 - Do not enumerate PCIe bus on CN56XX Pass 1 devices to avoid hard hang.
There is known issue with this hardware.

Submitted by:	Andrew Duane <aduane@juniper.net>
2012-01-13 02:33:55 +00:00
Jung-uk Kim
ec3fc72f94 Merge ACPICA 20120111. 2012-01-11 23:06:37 +00:00
Gleb Smirnoff
b4f66a1781 Redo r226660:
- Define schednetisr() to swi_sched.
 - In the swi handler check if there is some data prepared,
   and if true, then call pfsync_sendout(), however tell it
   not to schedule swi again.
 - Since now we don't obtain the pfsync lock in the swi handler,
   don't use ifqueue mutex to synchronize queue access.
2012-01-11 18:34:57 +00:00
Gleb Smirnoff
122d395f85 Fix some spacing in code under __FreeBSD__. 2012-01-11 14:24:03 +00:00
Gleb Smirnoff
c4f01d2d34 Add necessary locking in pfsync_in_ureq(). 2012-01-11 14:19:04 +00:00
Gleb Smirnoff
0744a28a79 Move PF_LOCK_ASSERT() under __FreeBSD__. 2012-01-11 14:13:42 +00:00
Gleb Smirnoff
3488c2786e Merge from OpenBSD:
revision 1.128
  date: 2009/08/16 13:01:57;  author: jsg;  state: Exp;  lines: +1 -5
  remove prototypes of a bunch of functions that had their implementations
  removed in pfsync v5.
2012-01-11 14:11:10 +00:00
Gleb Smirnoff
686cb93667 When running with INVARIANTS the mutex(9) code does all necessary
asserts for non-recursive mutexes.
2012-01-11 13:57:48 +00:00
Gleb Smirnoff
1d89f286c4 Can't pass MSIZE to m_cljget(), an mbuf can't be attached as external storage
to another mbuf.
2012-01-09 14:35:05 +00:00
Gleb Smirnoff
317ebc3d0d Backout of backout: we need SI_SUB_PROTO_DOMAIN for pfsync, since
it needs existing inetdomain on startup.
2012-01-09 12:06:02 +00:00
Gleb Smirnoff
101881ef42 Revert sub argument of MODULE_DECLARE back to r226532.
Noticed by:	bz
2012-01-09 09:19:00 +00:00
Gleb Smirnoff
151ceaa22c In FreeBSD we determine presence of pfsync(4) at run-time, not
at compile time, so define NPFSYNC to 1 always. While here, remove
unused defines.
2012-01-09 08:55:23 +00:00
Gleb Smirnoff
5c39f7bdeb Bunch of fixes to pfsync(4) module load/unload:
o Make the pfsync.ko actually usable. Before this change loading it
  didn't register protosw, so was a nop. However, a module /boot/kernel
  did confused users.
o Rewrite the way we are joining multicast group:
  - Move multicast initialization/destruction to separate functions.
  - Don't allocate memory if we aren't going to join a multicast group.
  - Use modern API for joining/leaving multicast group.
  - Now the utterly wrong pfsync_ifdetach() isn't needed.
o Move module initialization from SYSINIT(9) to moduledata_t method.
o Refuse to unload module, unless asked forcibly.
o Improve a bit some FreeBSD porting code:
  - Use separate malloc type.
  - Simplify swi sheduling.

This change is probably wrong from VIMAGE viewpoint, however pfsync
wasn't VIMAGE-correct before this change, too.

Glanced at by:	bz
2012-01-09 08:50:22 +00:00
Gleb Smirnoff
98a38f5b1d o Fix panic on module unload, that happened due to mutex being
destroyed prior to pfsync_uninit(). To do this, move all the
  initialization to the module_t method, instead of SYSINIT(9).
o Fix another panic after module unload, due to not clearing the
  m_addr_chg_pf_p pointer.
o Refuse to unload module, unless being unloaded forcibly.
o Revert the sub argument to MODULE_DECLARE, to the stable/8 value.

This change probably isn't correct from viewpoint of VIMAGE, but
the module wasn't VIMAGE-correct before the change, as well.

Glanced at by:	bz
2012-01-09 08:36:12 +00:00
Gleb Smirnoff
dabfce9a5a Merge from OpenBSD:
revision 1.170
  date: 2011/10/30 23:04:38;  author: mikeb;  state: Exp;  lines: +6 -7
  Allow setting big MTU values on the pfsync interface but not larger
  than the syncdev MTU.  Prompted by the discussion with and tested
  by Maxim Bourmistrov;  ok dlg, mpf

Consistently use sc_ifp->if_mtu in the MTU check throughout the
module. This backs out r228813.
2012-01-07 14:39:45 +00:00
Gleb Smirnoff
e883df1d1b Fix indentation. 2012-01-07 12:40:45 +00:00
Dimitry Andric
6d417c1c70 In sys/contrib/rdma/ib_addr.h, bump MAX_ADDR_LEN to 20 bytes (the same
value used in sys/ofed/include/linux/netdevice.h), so there will be no
buffer overruns in the rest of the inline functions in this file.

Reviewed by:	kmacy
MFC after:	1 week
2012-01-07 00:47:27 +00:00
Aleksandr Rybalko
e11f2b8243 Update contrib/xz-embedded to build with new GEOM_UNCOMPRESS module.
Approved by:	adrian (mentor)
2012-01-04 23:26:22 +00:00
Adrian Chadd
63dab8eed9 Initial copy of xz-embedded to sys/contrib/.
The upcoming geom_compress module (a read-only gzip/ulzma translation layer,
similar to what geom_uzip does) will leverage parts of this.
2012-01-01 21:32:25 +00:00
Oleksandr Tymoshenko
d77d1b1a17 - Properly clean state structure in cvmx_usb_initialize 2011-12-31 05:25:42 +00:00
Oleksandr Tymoshenko
67c1180199 - CAPK-0100 board's USB timer is 12MHz 2011-12-31 05:24:21 +00:00
Sergey Kandaurov
da914858e1 Fix LINT-VIMAGE build after r228814: use virtualized pf_pool_limits. 2011-12-24 00:23:27 +00:00
Gleb Smirnoff
6bc752e028 Merge from OpenBSD:
revision 1.122
  date: 2009/05/13 01:01:34;  author: dlg;  state: Exp;  lines: +6 -4
  only keep track of the number of updates on tcp connections. state sync on
  all the other protocols is simply pushing the timeouts along which has a
  resolution of 1 second, so it isnt going to be hurt by pfsync taking up
  to a second to send it over.

  keep track of updates on tcp still though, their windows need constant
  attention.
2011-12-22 19:09:55 +00:00
Gleb Smirnoff
2662e31fc3 Merge from OpenBSD:
revision 1.120
  date: 2009/04/04 13:09:29;  author: dlg;  state: Exp;  lines: +5 -5
  use time_uptime instead of time_second internally. time_uptime isnt
  affected by adjusting the clock.

  revision 1.175
  date: 2011/11/25 12:52:10;  author: dlg;  state: Exp;  lines: +3 -3
  use time_uptime to set state creation values as time_second can be
  skewed at runtime by things like date(1) and ntpd. time_uptime is
  monotonic and therefore more useful to compare against.
2011-12-22 19:05:58 +00:00