Commit Graph

2571 Commits

Author SHA1 Message Date
Bernhard Schmidt
4310d6deb2 Add support for Ralink RT2800/RT3000 chipsets.
Thanks to ray@, Sevan and Sergey Dyatko for feedback and testing!

Obtained from:	OpenBSD
MFC after:	3 weeks
2012-05-10 17:41:16 +00:00
Ulrich Spörlein
a8e5e7c520 Fix make depend 2012-05-06 11:41:00 +00:00
Ulrich Spörlein
ca27f0cef0 Fix make depend. 2012-05-01 07:38:40 +00:00
Alexander Motin
00f32ecbd0 Add to GEOM RAID class module, supporting the DDF metadata format, as
defined by the SNIA Common RAID Disk Data Format Specification v2.0.

Supports multiple volumes per array and multiple partitions per disk.
Supports standard big-endian and Adaptec's little-endian byte ordering.
Supports all single-layer RAID levels. Dual-layer RAID levels except
RAID10 are not supported now because of GEOM RAID design limitations.

Some work is still to be done, but the present code already manages basic
interoperation with RAID BIOS of the Adaptec 1430SA SATA RAID controller.

MFC after:	1 month
Sponsored by:	iXsystems, Inc.
2012-04-30 17:53:02 +00:00
Marius Strobl
7aa6584632 o Fixes:
- When switching to 4-bit operation, send a SET_CLR_CARD_DETECT command
    to disconnect the card-detect pull-up resistor from the DAT3 line before
    sending the SET_BUS_WIDTH command.
  - Add the missing "reserved" zero entry to the mantissa table used to
    decode various CSD fields. This was causing SD cards to report that they
    could run at 30 MHz instead of the maximum 25 MHz mandated in the spec.
o Enhancements:
  - At the MMC layer, format various info from the CID into a string that
    uniquely identifies the card instance (manufacturer number, serial
    number, product name and revision, etc). Export it as an instance
    variable.
  - At the MMCSD layer, display the formatted card ID string, and also
    report the clock speed of the hardware (not the card's max speed), and
    the number of bits and number of blocks per transfer. It comes out like
    this now:
    mmcsd0: 968MB <SD SD01G 8.0 SN 276886905 MFG 08/2008 by 3 SD> at mmc0
    22.5MHz/4bit/128-block
o Use DEVMETHOD_END.
o Use NULL instead of 0 for pointers.

PR:		156496
Submitted by:	Ian Lepore
MFC after:	1 week
2012-04-21 01:51:16 +00:00
Xin LI
f1c05d0b46 Fix build. 2012-04-20 04:40:39 +00:00
Alexander Motin
fc1de96060 Add to GEOM RAID class module for reading non-degraded RAID5 volumes and
some environment to differentiate 4 possible RAID5 on-disk layouts.

Tested with Intel and AMD RAID BIOSes.

MFC after:	2 weeks
2012-04-19 12:30:12 +00:00
Marcel Moolenaar
1eaf8e042c Compensate for the replacement of uart_cpu_{amd64|i386}.c with
uart_cpu_x86.c

Pointy hat: marcel
2012-04-18 17:44:05 +00:00
Josh Paetzel
6578a63cc7 Unbreak tinderbox.
Fix FreeBSD paradigms in the upstream code.

PR:	bin/166933
Submitted by:	Garrett Cooper <yanegomi@gmail.com>
2012-04-18 16:47:57 +00:00
Bjoern A. Zeeb
c2d2534beb Fix LINT builds after r234233; not sure why modules need DEBUG by default. 2012-04-14 13:40:39 +00:00
Josh Paetzel
c4d87335a8 Update to version 2.3.1.0
Obtained from:	Daniel Braniss <danny@cs.huji.ac.il>
2012-04-13 18:21:56 +00:00
John Baldwin
ed5a2b61fd Add OFED and the associated options and drivers to x86 LINT builds:
- Mark 'sdp' as requiring 'inet'.
- Always include "opt_inet.h" and "opt_inet6.h" and modify the IB
  driver Makefiles to honor WITH/WITHOUT_INET/INET6/_SUPPORT options
  to determine what should be enabled during a module build.
- Fix the mlxen(4) driver and the core IB code to compile without
  if INET is disabled (including when both INET and INET6 are disabled).

Reviewed by:	bz
MFC after:	2 weeks
2012-04-12 14:01:06 +00:00
Doug Ambrisko
a6ba0fd64d MFhead_mfi r227068
First cut of new HW support from LSI and merge into FreeBSD.
	Supports Drake Skinny and ThunderBolt cards.
MFhead_mfi r227574
	Style
MFhead_mfi r227579
	Use bus_addr_t instead of uintXX_t.
MFhead_mfi r227580
	MSI support
MFhead_mfi r227612
	More bus_addr_t and remove "#ifdef __amd64__".
MFhead_mfi r227905
	Improved timeout support from Scott.
MFhead_mfi r228108
	Make file.
MFhead_mfi r228208
	Fixed botched merge of Skinny support and enhanced handling
	in call back routine.
MFhead_mfi r228279
	Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH().
MFhead_mfi r228310
	Move mfi_decode_evt() to taskqueue.
MFhead_mfi r228320
	Implement MFI_DEBUG for 64bit S/G lists.
MFhead_mfi r231988
	Restore structure layout by reverting the array header to
	use [0] instead of [1].
MFhead_mfi r232412
	Put wildcard pattern later in the match table.
MFhead_mfi r232413
	Use lower case for hexadecimal numbers to match surrounding
	style.
MFhead_mfi r232414
	Add more Thunderbolt variants.
MFhead_mfi r232888
	Don't act on events prior to boot or when shutting down.
	Add hw.mfi.detect_jbod_change to enable or disable acting
	on JBOD type of disks being added on insert and removed on
	removing.  Switch hw.mfi.msi to 1 by default since it works
	better on newer cards.
MFhead_mfi r233016
	Release driver lock before taking Giant when deleting children.
	Use TAILQ_FOREACH_SAFE when items can be deleted.  Make code a
	little simplier to follow.  Fix a couple more style issues.
MFhead_mfi r233620
	Update mfi_spare/mfi_array with the actual number of elements
	for array_ref and pd.  Change these max. #define names to avoid
	name space collisions.  This will require an update to mfiutil
	It avoids mfiutil having to do a magic calculation.

	Add a note and #define to state that a "SYSTEM" disk is really
	what the firmware calls a "JBOD" drive.

Thanks to the many that helped, LSI for the initial code drop,
mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
Fabien Thomas
f5f9340b98 Add software PMC support.
New kernel events can be added at various location for sampling or counting.
This will for example allow easy system profiling whatever the processor is
with known tools like pmcstat(8).

Simultaneous usage of software PMC and hardware PMC is possible, for example
looking at the lock acquire failure, page fault while sampling on
instructions.

Sponsored by: NETASQ
MFC after:	1 month
2012-03-28 20:58:30 +00:00
Oleksandr Tymoshenko
2c1620b407 Jusy use i386 version of cyclic_machdep.c on all supported architectures.
It's generic enough to cover all of them.
2012-03-24 05:16:26 +00:00
Oleksandr Tymoshenko
9f69e6bdb1 Make lockstat and profile modules x86-only 2012-03-24 05:15:14 +00:00
Dimitry Andric
3b5683fce6 Work around the following clang warning in mps(4):
sys/dev/mps/mps_sas.c:861:1: error: function 'mpssas_discovery_timeout' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
  mpssas_discovery_timeout(void *data)
  ^

Because the driver is obtained from upstream, we don't want to modify
it; just silence the warning instead, it is harmless.

MFC after:	3 days
2012-03-23 11:35:01 +00:00
Andrey V. Elsukov
8bb4272910 Connect geom_part_ldm module to the build.
MFC after:	1 month
2012-03-19 13:15:48 +00:00
Robert Millan
bb197d4e46 Remove gratuitous DEBUG_FLAGS="-g" setting (this is already the default
option with GENERIC kernels).

Reviewed by:	ken
2012-03-16 21:46:02 +00:00
Bernhard Schmidt
b1866dfea3 Update the rt2860's firmware and add a Makefile for the module. While
here remove the ucode header file which was used to generate the fw files
but by now is outdated.

Reviewed by:	ray
Obtained from:	OpenBSD
2012-03-13 21:25:25 +00:00
Adrian Chadd
9124ddeb4a Add module building Makefile entries for NFSv4 and POSIX.1e ACL handling. 2012-03-13 20:28:42 +00:00
Alexander V. Chernikov
147972555f Use rt_numfibs variable instead of compile-time RT_NUMFIBS.
Reviewed by:    glebius (previous version)
Approved by:    kib(mentor), ae(mentor)
2012-03-13 11:08:40 +00:00
Bjoern A. Zeeb
0566170f70 Provide wbwd(4), a driver for the watchdog timer found on various
Winbond Super I/O chips.

With minor efforts it should be possible the extend the driver to support
further chips/revisions available from Winbond.  In the simplest case
only new IDs need to be added, while different chipsets might require
their own function to enter extended function mode, etc.

Sponsored by:	Sandvine Incorporated ULC (in 2011)
Reviewed by:	emaste, brueffer
MFC after:	2 weeks
2012-03-06 18:44:52 +00:00
Hans Petter Selasky
e8052eb4ea Add DWC OTG module to ARM builds.
MFC after:	1 week
2012-03-05 06:46:35 +00:00
Eitan Adler
a4e40567df Explicitly list dependency
PR:		misc/160463
Submitted by:	Garrett Cooper <yanegomi@gmail.com>
Helped by:	kan
Approved by:	cperciva
MFC after:	3 days
2012-03-04 16:46:27 +00:00
Alexander Motin
e4afd792df Add driver for the RME HDSPe AIO/RayDAT sound cards -- snd_hdspe(4).
Cards are expensive and so rare, so leave the driver as module.

Submitted by:	Ruslan Bukin <br@bsdpad.com>
MFC after:	2 weeks
2012-03-01 13:10:18 +00:00
Dimitry Andric
07b202a847 Define several extra macros in bsd.sys.mk and sys/conf/kern.pre.mk, to
get rid of testing explicitly for clang (using ${CC:T:Mclang}) in
individual Makefiles.

Instead, use the following extra macros, for use with clang:
- NO_WERROR.clang       (disables -Werror)
- NO_WCAST_ALIGN.clang  (disables -Wcast-align)
- NO_WFORMAT.clang	(disables -Wformat and friends)
- CLANG_NO_IAS		(disables integrated assembler)
- CLANG_OPT_SMALL	(adds flags for extra small size optimizations)

As a side effect, this enables setting CC/CXX/CPP in src.conf instead of
make.conf!  For clang, use the following:

CC=clang
CXX=clang++
CPP=clang-cpp

MFC after:	2 weeks
2012-02-28 18:30:18 +00:00
Justin Hibbits
d72bb9b024 Fix the scc(4) module build. Without the file it's missing a required symbol.
Approved by:	nwhitehorn (mentor)
MFC after:	3 days
2012-02-26 13:27:22 +00:00
Pyun YongHyeon
41e556b9d1 Connect smcphy(4) to mii module build. 2012-02-23 01:22:40 +00:00
Dimitry Andric
a0dd79dbdf When building with clang, disable -Wformat-security for
sys/dev/hpt27xx/osm_bsd.c, since it gets the following warnings:

sys/dev/hpt27xx/osm_bsd.c:1180:25: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security]
            S_IRUSR | S_IWUSR, driver_name);
                               ^~~~~~~~~~~
@/dev/hpt27xx/hpt27xx_config.h:46:21: note: expanded from:
#define driver_name hpt27xx_driver_name
                    ^~~~~~~~~~~~~~~~~~~

Since 'hpt27xx_driver_name' is a constant string symbol (coming from the
proprietary hpt27xx_lib.o file), there is no security problem.

Because this driver is provided by the vendor, and applying changes
requires re-certification and other bureaucratic exercises, just disable
the warning for now.

MFC after:	1 week
2012-02-21 21:20:52 +00:00
Adrian Chadd
7b1144d245 Break out the radar code into a separate source file.
This mirrors the internal HAL organisation and reduces the differences
between the HAL codebases slightly.

Obtained from:	Atheros
2012-02-20 03:07:07 +00:00
Jung-uk Kim
a159c266a9 Merge ACPICA 20120215. 2012-02-16 22:59:29 +00:00
Ulrich Spörlein
f7e784d50b Fix 'make depend'. 2012-02-16 21:57:50 +00:00
Bjoern A. Zeeb
08e00a3927 Depend on the relevant header files. 2012-02-11 08:34:33 +00:00
Luigi Rizzo
2f345d8ed5 Add a driver for Emulex OneConnect ethernet cards (10 Gbit PCIe)
A manpage will come in a future commit.

Submitted by:   Naresh Raju Gottumukkala (emulex)
2012-02-10 21:03:04 +00:00
Jim Harris
0f2a8452df Remove explicit CC assignment in isci(4) Makefile to allow for building
with clang.  Also fix a number of warnings uncovered when building with
clang around some implicit enum conversions.

Sponsored by: Intel
Approved by: scottl
2012-02-09 17:50:24 +00:00
Dimitry Andric
5e0a19bdee Consistently set RPCGEN_CPP when running rpcgen, so the C preprocessor
set via ${CPP} is used, instead of always using hardcoded /usr/bin/cpp.

MFC after:	1 week
2012-02-07 09:27:07 +00:00
Justin Hibbits
fb6d9e6077 Add exca to powerpc modules build as a dependency for cbb. 2012-02-05 13:29:01 +00:00
Robert Millan
4a47892c81 Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable
kernel modules that include binary-only code.

More fine-grained control is provided via MK_SOURCELESS_HOST (for native code
that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode).

Reviewed by:	julian, delphij, freebsd-arch
Approved by:	kib (mentor)
MFC after:	2 weeks
2012-02-04 00:54:43 +00:00
Joel Dahl
ca5a2a70ab Remove leftovers from previous commits.
Approved by:	jhb
2012-02-02 17:25:39 +00:00
Pedro F. Giffuni
b7c60aadbb Cleanup some sound headers that don't need to be in the modules makefiles.
Approved by:	jhb (mentor)
MFC after:	1 week
2012-02-02 00:10:20 +00:00
Justin Hibbits
363e589a37 Enable the pccard/cardbus modules for powerpc.
Approved by:	nwhitehorn (mentor)
2012-02-01 03:42:14 +00:00
Jim Harris
f11c7f6305 Add isci(4) driver for amd64 and i386 targets.
The isci driver is for the integrated SAS controller in the Intel C600
(Patsburg) chipset.  Source files in sys/dev/isci directory are
FreeBSD-specific, and sys/dev/isci/scil subdirectory contains
an OS-agnostic library (SCIL) published by Intel to control the SAS
controller.  This library is used primarily as-is in this driver, with
some post-processing to better integrate into the kernel build
environment.

isci.4 and a README in the sys/dev/isci directory contain a few
additional details.

This driver is only built for amd64 and i386 targets.

Sponsored by: Intel
Reviewed by: scottl
Approved by: scottl
2012-01-31 19:38:18 +00:00
Jack F Vogel
85d0a26ed4 New hardware support: Intel X540 adapter support added.
Some shared code reorganization along with the new adapter.
Sync changes to OACTIVE in igb into this driver.
Misc small fixes.
2012-01-30 16:42:02 +00:00
Kenneth D. Merry
d043c56453 Bring in the LSI-supported version of the mps(4) driver.
This involves significant changes to the mps(4) driver, but is not a
complete rewrite.

Some of the changes in this version of the driver:
 - Integrated RAID (IR) support.
 - Support for WarpDrive controllers.
 - Support for SCSI protection information (EEDP).
 - Support for TLR (Transport Level Retries), needed for tape drives.
 - Improved error recovery code.
 - ioctl interface compatible with LSI utilities.

mps.4:		Update the mps(4) driver man page somewhat for the driver
		changes.  The list of supported hardware still needs to be
		updated to reflect the full list of supported cards.

conf/files:	Add the new driver files.

mps/mpi/*:	Updated version of the MPI header files, with a BSD style
		copyright.

mps/*:		See above for a description of the new driver features.

modules/mps/Makefile:
		Add the new mps(4) driver files.

Submitted by:	Kashyap Desai <Kashyap.Desai@lsi.com>
Reviewed by:	ken
MFC after:	1 week
2012-01-26 18:17:21 +00:00
Bjoern A. Zeeb
aa57e971bc Fix ip_divert handling of inet and inet6 and module building some more.
Properly sort the "carp" case in modules/Makefile after it was renamed.

Reported by:	bde (most)
Reviewed by:	bde
MFC after:	3 days
2012-01-22 02:16:31 +00:00
Pedro F. Giffuni
5dcd37b17d Replace GPLd headers from the Maestro3 driver with BSD licensed
versions derived from /usr/ports/audio/oss.

The particular headers used were taken from the
attic/drv/oss_allegro directory and are mostly identical
to the previous files.

The Maestro3 driver is now free from the GPL.

NOTE: due to lack of testers this driver is being
considered for deprecation and removal.

PR:		kern/153920
Approved by:	jhb (mentor)
MFC after:	2 weeks
2012-01-20 22:37:10 +00:00
Jens Schweikhardt
49da75c9f6 Connect the bktr module(s) to the amd64 build.
MFC after:	7 days
2012-01-18 08:56:26 +00:00
Adrian Chadd
a1f698ef1c Tidy-up. 2012-01-17 18:20:34 +00:00
Adrian Chadd
4aecc339cf Fix the situation where net80211 is built with IEEE80211_SUPPORT_TDMA but a module
is used.

Although the module _builds_, it fails to load because of a missing symbol from
ieee80211_tdma.c.

Specifics:

* Always build ieee80211_tdma.c in the module;
* only compile in the code if IEEE80211_SUPPORT_TDMA is defined.
2012-01-15 19:45:23 +00:00