The presence of the latter causes a link error when building a
statically linked ctfdump(1) because libc defines the same symbol.
libc's warn() is defined as a weak symbol and so does not cause the same
problem, but let's just use libc's version.
Reported by: stephane rochoy <stephane.rochoy@stormshield.eu>
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Use the drop and enable endpoint context commands to force a reset of
the data toggle for USB 2.0 and USB 3.0 after:
- clear endpoint halt command (when the driver wishes).
- set config command (when the kernel or user-space wants).
- set alternate setting command (only affected endpoints).
Some XHCI HW implementations may not allow the endpoint reset command when
the endpoint context is not in the halted state.
Reported by: Juniper and Gary Jennejohn
MFC after: 1 week
Sponsored by: NVIDIA Networking
When VLAN HW filter is disabled, the NIC does not pass any vlan tagged
traffic. Setting these flags on the device allows vlan tagged traffic to
pass.
PR: 236983
Tested by: pi
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34824
Since a16732d670 we always print the l3 src/destination for Ethernet
rules. Update the tests to account for this.
Sponsored by: Rubicon Communications, LLC ("Netgate")
If iommu_gas_match_one has to adjust for a boundary crossing, its
check against maxaddr includes 'offset' in its calculation, to ensure
that the allocated memory does not exceed the max address. However, if
there's no boundary crossing adjustment, then the maxaddr check
disregards 'offset'. Fix that.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D34978
When invoked by inetd, ctlstat -P will now produce output suitable for
ingestion into Prometheus.
It's a drop-in replacement for https://github.com/Gandi/ctld_exporter,
except that it doesn't report the number of initiators per target, and
it does report time and dma_time.
MFC after: 2 weeks
Sponsored by: Axcient
Relnotes: yes
Reviewed by: bapt, bcr
Differential Revision: https://reviews.freebsd.org/D29901
Fix dialogs building and updating fault with disabled shadow
(conf.shadow=false and implicitly bsddialog --no-shadow).
While here delete WARNS=2: all warnings were fixed in upstream and
imported in 0.2.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D34958
It may be dynamic so we can't rely on PAGE_SIZE being present or
correct.
Reviewed by: markj, kib, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34961
The largepage_config posix shared memory test was failing on arm64 as
the page size array is never filled out. Fix this by calling
getpagesizes(3), via pagesizes.
Reviewed by: markj, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34960
15b1eb142c changed the callout code to store the CALLOUT_SHAREDLOCK flag
in c_iflags (where it used to be c_flags), but failed to update the
check in softclock_call_cc(). This resulted in the callout code always
taking the write lock, even if a read lock had been requested (with
the CALLOUT_SHAREDLOCK flag in callout_init_rm()).
Reviewed by: markj
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34959
While the kernel only performs the L3 check for
ETHERTYPE_IP/ETHERTYPE_IP6 we should always print the source and
destination addresses.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34918
Allow tables to be used for the l3 source/destination matching.
This requires taking the PF_RULES read lock.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34917
When we issue a request to pf and expect a serialised nvlist as a reply
we have to supply a suitable buffer to the kernel.
The required size for this buffer is difficult to predict, and may be
(slightly) different from request to request.
If it's insufficient the kernel will return ENOSPC. Teach libpfctl to
catch this and send the request again with a larger buffer.
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34908
Previously it was disabled right before translation was enabled.
This way the disable logic is still executed even when translation
is not be activated, e.g. with hw.iommu.dma=0 tunable set.
On some platforms we need to disable PMR in order for core dump to work.
At the same time it was observed that enabling translation has
a significant impact on network performance.
With this patch PMR can be disabled, with IOMMU translation not being
turned on by appending the following to the loader.conf:
hw.dmar.enable=1
hw.dmar.pmr.disable=1
hw.dmar.dma=0
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D34907
Provide a very brief introduction to capabilities, using a couple of
sentences from David Chisnall's mailing list response[1] to a question
about Linux capabilities and Capsicum.
Mailing list subject (in case the archive URL changes) was
Re: Linux capabilities to Capsicum
[1] https://lists.freebsd.org/archives/freebsd-hackers/2022-April/001032.html
Reviewed by: oshogbo
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34945
This argument is useless for the vast majority of drivers. For now,
use __VA_ARGS__ wrapper macros so that that the *DRIVER_MODULE()
macros accept both the old version (with a devclass) and the new
version (which omits the argument and stores NULL in the
driver_module_data structure). This provides an API compatiblity
shim that can be merged to older stable branches.
Once all drivers relevant to 14.0 (both in and out of tree) have been
updated, the API compat shims can be dropped.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D34963
This permits a driver module structure that doesn't want to store a
pointer to the new driver's devclass.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D34962
Insert padding in __cxa_exception struct for compatibility
Similar to https://github.com/llvm/llvm-project/commit/f2a436058fcb, the
addition of __attribute__((__aligned__)) to _Unwind_Exception (in commit
b9616964) causes implicit padding to be inserted before the unwindHeader
field in __cxa_exception.
Applications attempt to get at the earlier fields in __cxa_exception, so
preserve the same negative offsets in __cxa_exception, by moving the
padding to the beginning of the struct.
The assumption here is that if the ABI is not aware of the padding
before unwindHeader and put the referenceCount/primaryException in
there, no padding should exist before unwindHeader.
This should make libreoffice's custom exception handling mechanisms work
correctly, even if it was built against an older cxxabi.h/unwind.h pair.
PR: 263370
MFC after: 3 days
diff3 in -m mode generates a complete file with changes bracketed with
conflict markers. This adds support for diff3 to generate version
control style three way merge output.
The output format was inferred from looking at the gnu diff3 output on a
selection of test files as a specification of what diff3 -m should
output is not available. It is likely there are cases where the -m
output differs from other tools and I am happy to update diff3 to
address these.
Discussed with: pstef, kevans
Sponsored by: Klara, Inc.
Diff3 in -A mode generates an ed script to show how the 3 files and
brackets changes that conflict. The ed script generated should when
applied leave familiar merge conflict markers in a patched file.
Diff3 output is not documented, this feature has been arrived at by
comparing bsd diff3 output to gnu diff3 output until they were made to
agree. There are likely to still be differences between these formats.
The gnu diff3 guide is actually quite good at explaining how diff3
output should appear, but it doesn't cover every form of output from
diff3.
https://www.gnu.org/software/diffutils/manual/diffutils.html#Comparing-Three-Files
Discussed with: pstef, kevans
Sponsored by: Klara, Inc.
We already set it earlier in do_setup_env().
Fixes: 19261079b7 ("openssh: update to OpenSSH v8.7p1")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Replace the edscript code that tracked and printed lines using byte
offsets with code that can work from line offsets.
This tidies up the reduces duplication in the edscript output code. It
also fixes the usage of the de struct so that it only tracks diffs as
line offsets rather than the usage changing from line offsets to byte
offsets during the lifetime of diff3.
Large files with large numbers of ranges will probably suffer in
performance here, but as we don't use diff3 yet this isn't a regression.
Include a warning for future hackers so they have a place to start
hacking from.
Reviewed by: pstef
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34941
When exporting sysctls to Prometheus, the exporter replaces "." with
"_". This caused several metrics to alias, confusing the Prometheus
server. Fix it by:
* Renaming the "tcp_log_bucket" UMA zone to "tcp_log_id_bucket". Also,
rename "tcp_log_node" to "tcp_log_id_node" for consistency.
* Not exporting sysctls with "(LEGACY)" in the description. That is
used by ZFS sysctls that have been replaced by others, many of which
alias to the same Prometheus metric name (like "vfs.zfs.arc_max" and
"vfs.zfs.arc.max").
PR: 259607
Reported by: delphij
MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: delphij,rew,thj
Differential Revision: https://reviews.freebsd.org/D34952
