child process that were inherited from its parent. However, this should
not be done in the case of a vfork, since the fork handler ends up removing
the tracepoints from the shared vm space, and userland DTrace probes in the
parent will no longer fire as a result.
Now the child of a vfork may trigger userland DTrace probes enabled in its
parent, so modify the fasttrap probe handler to handle this case and handle
the child process in the same way that it would handle the traced process.
In particular, if once traces function foo() in a process that vforks, and
the child calls foo(), fasttrap will treat this call as having come from the
parent. This is the behaviour of the upstream code.
While here, add #ifdef guards to some code that isn't present upstream.
MFC after: 1 month
requires process descriptors to work and having PROCDESC in GENERIC
seems not enough, especially that we hope to have more and more consumers
in the base.
MFC after: 3 days
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).
Reviewed by: markj
MFC after: 3 weeks
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
exhausted.
- Add a new protect(1) command that can be used to set or revoke protection
from arbitrary processes. Similar to ktrace it can apply a change to all
existing descendants of a process as well as future descendants.
- Add a new procctl(2) system call that provides a generic interface for
control operations on processes (as opposed to the debugger-specific
operations provided by ptrace(2)). procctl(2) uses a combination of
idtype_t and an id to identify the set of processes on which to operate
similar to wait6().
- Add a PROC_SPROTECT control operation to manage the protection status
of a set of processes. MADV_PROTECT still works for backwards
compatability.
- Add a p_flag2 to struct proc (and a corresponding ki_flag2 to kinfo_proc)
the first bit of which is used to track if P_PROTECT should be inherited
by new child processes.
Reviewed by: kib, jilles (earlier version)
Approved by: re (delphij)
MFC after: 1 month
using SDT_PROBE_ARGTYPE(). This will make it easy to extend the SDT(9) API
to allow probes with dynamically-translated types.
There is no functional change.
MFC after: 2 weeks
- Capability is no longer separate descriptor type. Now every descriptor
has set of its own capability rights.
- The cap_new(2) system call is left, but it is no longer documented and
should not be used in new code.
- The new syscall cap_rights_limit(2) should be used instead of
cap_new(2), which limits capability rights of the given descriptor
without creating a new one.
- The cap_getrights(2) syscall is renamed to cap_rights_get(2).
- If CAP_IOCTL capability right is present we can further reduce allowed
ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed
ioctls can be retrived with cap_ioctls_get(2) syscall.
- If CAP_FCNTL capability right is present we can further reduce fcntls
that can be used with the new cap_fcntls_limit(2) syscall and retrive
them with cap_fcntls_get(2).
- To support ioctl and fcntl white-listing the filedesc structure was
heavly modified.
- The audit subsystem, kdump and procstat tools were updated to
recognize new syscalls.
- Capability rights were revised and eventhough I tried hard to provide
backward API and ABI compatibility there are some incompatible changes
that are described in detail below:
CAP_CREATE old behaviour:
- Allow for openat(2)+O_CREAT.
- Allow for linkat(2).
- Allow for symlinkat(2).
CAP_CREATE new behaviour:
- Allow for openat(2)+O_CREAT.
Added CAP_LINKAT:
- Allow for linkat(2). ABI: Reuses CAP_RMDIR bit.
- Allow to be target for renameat(2).
Added CAP_SYMLINKAT:
- Allow for symlinkat(2).
Removed CAP_DELETE. Old behaviour:
- Allow for unlinkat(2) when removing non-directory object.
- Allow to be source for renameat(2).
Removed CAP_RMDIR. Old behaviour:
- Allow for unlinkat(2) when removing directory.
Added CAP_RENAMEAT:
- Required for source directory for the renameat(2) syscall.
Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR):
- Allow for unlinkat(2) on any object.
- Required if target of renameat(2) exists and will be removed by this
call.
Removed CAP_MAPEXEC.
CAP_MMAP old behaviour:
- Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and
PROT_WRITE.
CAP_MMAP new behaviour:
- Allow for mmap(2)+PROT_NONE.
Added CAP_MMAP_R:
- Allow for mmap(PROT_READ).
Added CAP_MMAP_W:
- Allow for mmap(PROT_WRITE).
Added CAP_MMAP_X:
- Allow for mmap(PROT_EXEC).
Added CAP_MMAP_RW:
- Allow for mmap(PROT_READ | PROT_WRITE).
Added CAP_MMAP_RX:
- Allow for mmap(PROT_READ | PROT_EXEC).
Added CAP_MMAP_WX:
- Allow for mmap(PROT_WRITE | PROT_EXEC).
Added CAP_MMAP_RWX:
- Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC).
Renamed CAP_MKDIR to CAP_MKDIRAT.
Renamed CAP_MKFIFO to CAP_MKFIFOAT.
Renamed CAP_MKNODE to CAP_MKNODEAT.
CAP_READ old behaviour:
- Allow pread(2).
- Disallow read(2), readv(2) (if there is no CAP_SEEK).
CAP_READ new behaviour:
- Allow read(2), readv(2).
- Disallow pread(2) (CAP_SEEK was also required).
CAP_WRITE old behaviour:
- Allow pwrite(2).
- Disallow write(2), writev(2) (if there is no CAP_SEEK).
CAP_WRITE new behaviour:
- Allow write(2), writev(2).
- Disallow pwrite(2) (CAP_SEEK was also required).
Added convinient defines:
#define CAP_PREAD (CAP_SEEK | CAP_READ)
#define CAP_PWRITE (CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ)
#define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL)
#define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W)
#define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X)
#define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X)
#define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X)
#define CAP_RECV CAP_READ
#define CAP_SEND CAP_WRITE
#define CAP_SOCK_CLIENT \
(CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \
CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN)
#define CAP_SOCK_SERVER \
(CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \
CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \
CAP_SETSOCKOPT | CAP_SHUTDOWN)
Added defines for backward API compatibility:
#define CAP_MAPEXEC CAP_MMAP_X
#define CAP_DELETE CAP_UNLINKAT
#define CAP_MKDIR CAP_MKDIRAT
#define CAP_RMDIR CAP_UNLINKAT
#define CAP_MKFIFO CAP_MKFIFOAT
#define CAP_MKNOD CAP_MKNODAT
#define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER)
Sponsored by: The FreeBSD Foundation
Reviewed by: Christoph Mallon <christoph.mallon@gmx.de>
Many aspects discussed with: rwatson, benl, jonathan
ABI compatibility discussed with: kib
callout is started before kern_setitimer() acquires process mutex, but
looses a race and kern_setitimer() gets the process mutex before the
callout. Then, assuming that new specified struct itimerval has
it_interval zero, but it_value non-zero, the callout, after it starts
executing again, clears p->p_realtimer.it_value, but kern_setitimer()
already rescheduled the callout.
As the result of the race, both p_realtimer is zero, and the callout
is rescheduled. Then, in the exit1(), the exit code sees that it_value
is zero and does not even try to stop the callout. This allows the
struct proc to be reused and eventually the armed callout is
re-initialized. The consequence is the corrupted callwheel tailq.
Use process mutex to interlock the callout start, which fixes the race.
Reported and tested by: pho
Reviewed by: jhb
MFC after: 2 weeks
On success we have to drop one after procdesc_finit() and on failure
we have to close allocated slot with fdclose(), which also drops one
reference for us and drop the remaining reference with fdrop().
Without this change closing process descriptor didn't result in killing
pdfork(2)ed child.
Reviewed by: rwatson
MFC after: 1 month
not get syscall exit notification until the child performed exec of
exit. Swap the order of doing ptracestop() and waiting for P_PPWAIT
clearing, by postponing the wait into syscallret after ptracestop()
notification is done.
Reported, tested and reviewed by: Dmitry Mikulin <dmitrym juniper net>
MFC after: 2 weeks
to the debugger. When reparenting for debugging, keep the child in
the new orphan list of old parent. When looping over the children in
kern_wait(), iterate over both children list and orphan list to search
for the process by pid.
Submitted by: Dmitry Mikulin <dmitrym juniper.net>
MFC after: 2 weeks
we were accounting the newly created process to its parent instead
of the child itself. This caused problems later, when the child
changed its credentials - the per-uid, per-jail etc counters were
not properly updated, because the maxproc counter in the child
process was 0.
Approved by: re (kib)
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
A "process descriptor" file descriptor is used to manage processes
without using the PID namespace. This is required for Capsicum's
Capability Mode, where the PID namespace is unavailable.
New system calls pdfork(2) and pdkill(2) offer the functional equivalents
of fork(2) and kill(2). pdgetpid(2) allows querying the PID of the remote
process for debugging purposes. The currently-unimplemented pdwait(2) will,
in the future, allow querying rusage/exit status. In the interim, poll(2)
may be used to check (and wait for) process termination.
When a process is referenced by a process descriptor, it does not issue
SIGCHLD to the parent, making it suitable for use in libraries---a common
scenario when using library compartmentalisation from within large
applications (such as web browsers). Some observers may note a similarity
to Mach task ports; process descriptors provide a subset of this behaviour,
but in a UNIX style.
This feature is enabled by "options PROCDESC", but as with several other
Capsicum kernel features, is not enabled by default in GENERIC 9.0.
Reviewed by: jhb, kib
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
delivered to parent when the child exists.
Submitted by: Petr Salinger <Petr.Salinger seznam cz> (Debian/kFreeBSD)
MFC after: 1 week
X-MFC-note: bump __FreeBSD_version
won't happen before 9.0. This commit adds "#ifdef RACCT" around all the
"PROC_LOCK(p); racct_whatever(p, ...); PROC_UNLOCK(p)" instances, in order
to avoid useless locking/unlocking in kernels built without "options RACCT".
and per-loginclass resource accounting information, to be used by the new
resource limits code. It's connected to the build, but the code that
actually calls the new functions will come later.
Sponsored by: The FreeBSD Foundation
Reviewed by: kib (earlier version)
- Hold the proc lock while changing the state from PRS_NEW to PRS_NORMAL
in fork to honor the locking requirements. While here, expand the scope
of the PROC_LOCK() on the new process (p2) to avoid some LORs. Previously
the code was locking the new child process (p2) after it had locked the
parent process (p1). However, when locking two processes, the safe order
is to lock the child first, then the parent.
- Fix various places that were checking p_state against PRS_NEW without
having the process locked to use PROC_LOCK(). Every place was already
locking the process, just after the PRS_NEW check.
- Remove or reduce the use of PROC_SLOCK() for places that were checking
p_state against PRS_NEW. The PROC_LOCK() alone is sufficient for reading
the current state.
- Reorder fill_kinfo_proc() slightly so it only acquires PROC_SLOCK() once.
MFC after: 1 week
explicit process at fork trampoline path instead of eventhadler(schedtail)
invocation for each child process.
Remove eventhandler(schedtail) code and change linux ABI to use newly added
sysvec method.
While here replace explicit comparing of module sysentvec structure with the
newly created process sysentvec to detect the linux ABI.
Discussed with: kib
MFC after: 2 Week
traced process by adding two new events which records value of process
sv_flags to the trace file at process creation/execing/exiting time.
MFC after: 1 Month.
thread and proc have been copied and zeroed from the old thread and
proc. Otherwise attempts to modify thread or process data in sched_fork()
could be undone.
- Don't copy td_{base,}_user_pri from the old thread to the new thread in
sched_fork_thread() in ULE. This is already done courtesy the bcopy()
of the thread copy region.
- Always initialize the real priority (td_priority) of new threads to the
new thread's base priority (td_base_pri) to avoid bogusly inheriting a
borrowed priority from the parent thread.
MFC after: 2 weeks
It is possible a lower priority thread lending priority to higher priority
thread, in old code, it is ignored, however the lending should always be
recorded, add field td_lend_user_pri to fix the problem, if a thread does
not have borrowed priority, its value is PRI_MAX.
MFC after: 1 week
and set *procp to NULL in all cases. Previously, it was not being set
in the ERESTART case. This is effectively no-op, since its value is
ignored by callers in the error case.
Reviewed by: kib@
may be left. This fixes a memory leak that can occur when tracing is
disabled on a process via disabling tracing of a specific file (or if
an I/O error occurs with the tracefile) if the process's next system
call is exit(). The trace disabling code clears p_traceflag, so exit1()
doesn't do any KTRACE-related cleanup leading to the leak. I chose to
make the free'ing of pending records synchronous rather than patching
exit1().
- Move KTRACE-specific logic out of kern_(exec|exit|fork).c and into
kern_ktrace.c instead. Make ktrace_mtx private to kern_ktrace.c as a
result.
MFC after: 1 month
rwlock to protect the table. In old code, thread lookup is done with
process lock held, to find a thread, kernel has to iterate through
process and thread list, this is quite inefficient.
With this change, test shows in extreme case performance is
dramatically improved.
Earlier patch was reviewed by: jhb, julian
use '-' in probe names, matching the probe names in Solaris.[1]
Add userland SDT probes definitions to sys/sdt.h.
Sponsored by: The FreeBSD Foundation
Discussed with: rwaston [1]
Remove the altkstacks, instead instantiate threads with kernel stack
allocated with the right size from the start. For the thread that has
kernel stack cached, verify that requested stack size is equial to the
actual, and reallocate the stack if sizes differ [1].
This fixes the bug introduced by r173361 that was committed several days
after r173004 and consisted of kthread_add(9) ignoring the non-default
kernel stack size.
Also, r173361 removed the caching of the kernel stacks for a non-first
thread in the process. Introduce separate kernel stack cache that keeps
some limited amount of preallocated kernel stacks to lower the latency
of thread allocation. Add vm_lowmem handler to prune the cache on
low memory condition. This way, system with reasonable amount of the
threads get lower latency of thread creation, while still not exhausting
significant portion of KVA for unused kstacks.
Submitted by: peter [1]
Discussed with: jhb, julian, peter
Reviewed by: jhb
Tested by: pho (and retested according to new test scenarious)
MFC after: 1 week
allocated with the right size from the start. For the thread that has
kernel stack cached, verify that requested stack size is equial to the
actual, and reallocate the stack if sizes differ [1].
This fixes the bug introduced by r173361 that was committed several days
after r173004 and consisted of kthread_add(9) ignoring the non-default
kernel stack size.
Also, r173361 removed the caching of the kernel stacks for a non-first
thread in the process. Introduce separate kernel stack cache that keeps
some limited amount of preallocated kernel stacks to lower the latency
of thread allocation. Add vm_lowmem handler to prune the cache on
low memory condition. This way, system with reasonable amount of the
threads get lower latency of thread creation, while still not exhausting
significant portion of KVA for unused kstacks.
Submitted by: peter [1]
Discussed with: jhb, julian, peter
Reviewed by: jhb
Tested by: pho
MFC after: 1 week
