Or else disable the device. Note that the detection can be bypassed by
setting the hw.atrtc.enable option in the loader configuration file.
More information can be found on atrtc(4).
Sponsored by: Citrix Systems R&D
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D14399
Remove how to format K&R stuff. The project hasn't been using it in
new code for a long time. It's so obsolete, we don't need a statement
to never use it. Add a statement requesting that comments about
parameters be preserved when converting to ASNI style, per Kirk.
Differential Revision: https://reviews.freebsd.org/D14051
ConnectX-4/5 devices in mlx5core.
The dump is obtained by reading a predefined register map from the
non-destructive crspace, accessible by the vendor-specific PCIe
capability (VSC). The dump is stored in preallocated kernel memory and
managed by the mlx5tool(8), which communicates with the driver using a
character device node.
The utility allows to store the dump in format
<address> <value>
into a file, to reset the dump content, and to manually initiate the
dump.
A call to mlx5_fwdump() should be added at the places where a dump
must be fetched automatically. The most likely place is right before a
firmware reset request.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
LLD is a cross toolchain component. It shouldn't be built when
requesting a build without building a cross compiler.
(CROSS_COMPILER is somewhat unfortunately named; in any case, lld
should be treated as GNU binutils here.)
Submitted by: Dan McGregor <dan.mcgregor at usask.ca>
MFC after: 1 week
According with /etc/rc.initdiskless the default mfs allocation
is now 5Mb (10240 x 512 bytes sectors)
Submitted by: rodrigo
Reviewed by: bcr
Approved by: manpages (bcr)
Differential Revision: https://reviews.freebsd.org/D14592
A sub-make, such as in 'make buildworld', may want to override MAKEOBJDIRPREFIX
but is unable to do so if src-env.conf is forcing it to another value. Without
using '?=' the sub-make may use the wrong .OBJDIR.
Reported by: eadler
Sponsored by: Dell EMC
- Add fdt_pinctrl(4) with general information for the driver
- Add fdt_pinctrl(9) with fdt_pinctrl KPI description
Reviewed by: ian, manu, wblock
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14235
imcsmb(4) provides smbus(4) support for the SMBus controller functionality
in the integrated Memory Controllers (iMCs) embedded in Intel Sandybridge-
Xeon, Ivybridge-Xeon, Haswell-Xeon, and Broadwell-Xeon CPUs. Each CPU
implements one or more iMCs, depending on the number of cores; each iMC
implements two SMBus controllers (iMC-SMBs).
*** IMPORTANT NOTE ***
Because motherboard firmware or the BMC might try to use the iMC-SMBs for
monitoring DIMM temperatures and/or managing an NVDIMM, the driver might
need to temporarily disable those functions, or take a hardware interlock,
before using the iMC-SMBs. Details on how to do this may vary from board to
board, and the procedure may be proprietary. It is strongly suggested that
anyone wishing to use this driver contact their motherboard vendor, and
modify the driver as described in the manual page and in the driver itself.
(For what it's worth, the driver as-is has been tested on various SuperMicro
motherboards.)
Reviewed by: avg, jhb
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14447
Discussed with: avg, ian, jhb
Tested by: allanjude (previous version), Panasas
Makefile.${MACHINE_ARCH} and remove the now-empty files. Generate the
*32 directories on the necessary architectures (well, currently only
amd64) on the fly. Remove LOADER_EFI variable and co-locate it with
EFI.
Differential Review: https://reviews.freebsd.org/D14546
camelCase tends to be preferred for function identifiers, while
internal_underscores are preferred for variable identifiers. This convention
makes it a little bit easier to eyeball whether variable/function usage is
correct.
The optional commas for final table values are preferred to reduce chances
for error.
It was originally written by Sun as part of the STF (Solaris test framework).
They open sourced it in OpenSolaris, then HighCloud partially ported it to
FreeBSD, and Spectra Logic finished the port. We also added many testcases,
fixed many broken ones, and converted them all to the ATF framework. We've had
help along the way from avg, araujo, smh, and brd.
By default most of the tests are disabled. Set the disks Kyua variable to
enable them.
Submitted by: asomers, will, justing, ken, brd, avg, araujo, smh
Sponsored by: Spectra Logic Corp, HighCloud
Added the ability to:
* Create virtual interfaces
* Create vlan interfaces
* Get interface fib
* Get interface groups
* Get interface status
* Get nd6 info
* Get media status
* Get additional ifaddr info in a convenient struct
* Get vhids
* Get carp info
* Get lagg and laggport status
* Iterate over all interfaces and ifaddrs
And add more examples, too.
Note that this is a backwards-incompatible change. But that's ok, because it's
a private library.
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D14463
A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset
information (Part Number, Serial Number) encoded in the "Serial Presence
Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and
reports the memory capacity of the DIMM, in megabytes. If the DIMM includes
a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14392
Discussed with: avg, cem
Tested by: avg, cem (previous version, no semantic changes)
Add chvgpio(4) driver for Intel Z8xxx SoC family. This product
was formerly known as Cherry Trail but Linux and OpenBSD drivers
refer to it as Cherry View. This driver is derived from OpenBSD
one so the name is kept for alignment with another BSD system.
Submitted by: Tom Jones <tj@enoti.me>
Reviewed by: gonzo, wblock(man page)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13086
This code, which is basically `svnversion || svnliteversion`, generates
2 fstatat(2) for every directory in PATH for every Makefile parsed that
includes bsd.own.mk. This can add up for things like generating a Ports
index (Poudriere) or building a dependency graph for base.
Sponsored by: Dell EMC
MFC after: 2 weeks
The intent of this guideline is to avoid creating global variables in module
scope. Its main purpose is to serve as a reminder that variables at module
scope also need to be declared.
We want to avoid global variables in general, but this is easier to mess up
when designing things in the module scope.
VirtIO V1 provides configuration in multiple VENDOR capabilities so this
allows all of the configuration to be discovered.
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14325
This covers the lua style guidelines we've generally agreed on so far. It
will be revised as work continues and we run into more scenarios that need
specified.
Discussed with: cem, jilles
Differential Revision: https://reviews.freebsd.org/D14423
