Some typedefs are system dependent, so move them into stat_arch.h where
they are used. On amd64, nlinks is a int64_t, while on aarch64 it's an
int (or int32_t).
Sponsored by: Netflix
Have a better include order so this can more easily be shared between
EFI and kboot. Fewer ifdefs and the same (enough) include order as
before.
Sponsored by: Netflix
We call bi_copymodules twice: once with 0 and once with the size of the
arena. We do this to find the size, it turns out. Document this.
Sponsored by: Netflix
For the 64-bit platforms, this is a nop. Currently kboot only supports
64-bit platforms, though. If we support 32-bit in the future, this will
become important.
Noticed by: rpokala
Sponsored by: Netflix
Added missing functionality to allow us to boot off of things like
/dev/nvme0n1p2 successfully. And to list all available devices and
partitions with 'lsdev'.
Sponsored by: Netflix
Use the system's firmware memory map to find a good place to put the
kernel that won't stomp on anything else. While this uses obstensibly MI
interfaces to get this data, arm64 doesn't have this, nor does
powerpc64, so place it here.
Sponsored by: Netflix
We can use devparse directly now. No need to invent a kboot_parsedev
that just does what devparse does now that we've refactored.
Sponsored by: Netflix
Most of the files in /sys/ and /proc/ are small with one value. Create
two routines to help us read the file and decode that value.
Sponsored by: Netflix
Both ofw_disk and ofw_net use the same parsedev routine, except for the
string passed in to match the ofw device node's type. Create a routine
to do that and connect these two users up to that.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37560
Add a parsedev support for OpenFirmware disks. We must look at
characteristics of the OFW node to know if we match this device (so
supply a match routine) or not. Add a parsing routine to allocate
devdesc for OpenFirmware disks as well.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37558
We need to match devices in a slightly special way: We have to look up
the path and see if the device is a 'network' device in order to use it.
Sponsored by: Netflix
Tested by: grehan@ (with tweaks to my original patch)
Differential Revision: https://reviews.freebsd.org/D37557
ofw_path_to_handle converts a path string to a phandle_t. It searches
down the path for the first device whose type matches the passed-in
string.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37556
On OpenFirmware, and possibly kboot, we use full path names for the
objects that are the 'device'. kboot uses a hack of knowing that all
disk device nodes start with '/dev', but this generalizes it for
OpenFirmware where both 'block' and 'network' devices live in the same
namespace and one must ask the OF node its type to know if this device
type matches.
For drivers that don't specify, the current convention of using
strncmp() is retained. This is done only in devparse(), but everything
uses it directly (or will soon).
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37554
To support more flexible device matching, we now pass in the full
devspec to the parsedev routines. For everything execpt uboot, this is
just a drop in (since everything except uboot and openfirmware always
uses disk...: and/or zfs:, but openfirmware isn't really affected).
uboot we kludge around it by subtracting 4 from where the rest of the
device name starts. This is unforunate, and can compute the address one
before the string. But we never dereference that address. uboot needs
more work, and this is an acceptable UB until that other work happens.
OFW doesn't really use the parsedev routines these days (since none of
the supported device uses this... yet). It too needs more work, but it
needs device matching support first.
Sponsored by: Netflix
Reviewed by: delphij
Differential Revision: https://reviews.freebsd.org/D37553
devinit() marches through all the devices, calling the inint routines if
any exist. Replace all the identical copies of this code.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37349
The rest of the code in the tree assumes that a DEVT_DISK uses a
disk_devdesc to represent the device. However ofw_disk diesn't, so we
can't use disk_fmtdev, nor disk_parsedev. ofw needs to have a
dv_match-like routine to use devpasrse, though, since we have two
drivers (net and block) that claim the same sort of devices (eg
/path/to/ofw-dev) based on the device-type property. In the interim, we
can't use devmatch and ofw_disk's and the default net driver's parsing
is offloaded ofw_parsedev.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37347
We no longer need the zfs stubs since we're no longer referencing these
functions outside of zfs.c.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37345
We don't need to check if something is a ZFS device. Instead, if the
found device has a parse routine, call it. Otherwise, just copy the
path.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37343
We no longer need to have to hand-code this for each boot loader since
devparse() handles them all with dv_parsedev().
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37342
We no longer need to have to hand-code this for each boot loader since
devparse() handles them all with dv_parsedev().
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37341
We no longer need to have to hand-code this for each boot loader since
devparse() handles them all with dv_parsedev().
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37340
devparse is now the preferred interface to use to parse device
strings or device:/path strings. It parses the passed in string,
mallocs the device's particular devdesc string and returns the
'remainder' of the device:/path for further processing.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37338
Allow device classes to define a parsing routine. Most device classes
already have these routines, but there's much duplication in their
use. Define an interface for a common routine to parse an individual
device. By convetion, files have the form "[device:]/path/to/file"
where device is optional (filled in to be the value of currdev)
and it starts with the dv_name field of the device, with the rest
of the name up to the device (typically a unit number, but disks
add partition inforation, and other devices may do artibtrary
otehr things).
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37337
Change the first argument to zfs_parsedev() to be a pointer to a struct
devdesc *. This now gets filled in with a malloc'd structure that's
returned to the caller that the caller is repsonsible for freeing. Most
nplaces in the tree passed in a malloc'd pointer anyway, and this moves
knowledge of zfs_devdesc more firmly into the zfs.c code.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37336
Change the first argument to disk_parsedev() to be a pointer to a struct
devdesc *. This now gets filled in with a malloc'd structure that's
returned to the caller that the caller is repsonsible for freeing. Most
places in the tree passed in a malloc'd pointer anyway, and this moves
knowledge of disk_devdesc more firmly into the disk.[ch] code.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37335
So add ${NO_WDEPRECATED_NON_PROTOTYPE} to the CFLAGS of those
files. This can be removed when we import a zlib that's free of this
anachronism.
Sponsored by: Netflix
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D37516
Update to use c99 initializers, although there's no plans to change
anything that this would make easier...
Sponsored by: Netflix
Reviewed by: zlei
Differential Revision: https://reviews.freebsd.org/D37442
No need to call strchr twice, when one call to strpbrk will do the
job.. Test booted with qemu-powerpc + mac99 successfully.
Minor style(9) tweaks as well.
Sponsored by: Netflix
clang 15 insists that we call entry() via a function prototype. Rather
than copping out and using (...), cast it to the same prototype that's
used elsewhere (with tweaks to pointers to make them fit into that
prototype). No functional change.
Sponsored by: Netflix
Remove support for booting off of firewire, and for having dcons via
firewire in the loader. Kernel support for these things is unchanged.
Discussed on arch@ and the current state is not working (and the build
was wrong to boot).
Sponsored by: Netflix
Discussed: https://lists.freebsd.org/archives/freebsd-arch/2022-November/000267.html
Reviewed by: kevans, melifaro, emaste
Differential Revision: https://reviews.freebsd.org/D37334
enum disk_ioctl is unused. It's only ever defined. All of the stand
code uses DIOCGSECTORSIZE and DIOCGMEDIASIZE instead, both to query and
to implement ioctl.
Sponsored by: Netflix