Commit Graph

2126 Commits

Author SHA1 Message Date
Marcel Moolenaar
23110bedcd Enable debug_mpsafevm on ia64 due to the severe functional regression
caused by recent locking changes when it's off. Revert the logic to
trim down the conditional.

Clued-in by: alc@
2005-05-08 23:56:16 +00:00
Jeff Roberson
b8a0b997fd - We need to inhert the OBJ_NEEDGIANT flag from the original object in
vm_object_split().

Spotted by:	alc
2005-05-04 20:54:16 +00:00
Jeff Roberson
ed4fe4f4f5 - Add a new object flag "OBJ_NEEDSGIANT". We set this flag if the
underlying vnode requires Giant.
 - In vm_fault only acquire Giant if the underlying object has NEEDSGIANT
   set.
 - In vm_object_shadow inherit the NEEDSGIANT flag from the backing object.
2005-05-03 11:11:26 +00:00
Alan Cox
b7903e65fb Remove GIANT_REQUIRED from vmspace_exec().
Prodded by: jeff
2005-05-02 07:05:20 +00:00
Jeff Roberson
382a601cd7 - VM_LOCK_GIANT in the swap pager's iodone routine as VFS will soon call it
without Giant.

Sponsored by:	Isilon Systems, Inc.
2005-04-30 11:25:49 +00:00
Robert Watson
5d1ae027f0 Modify UMA to use critical sections to protect per-CPU caches, rather than
mutexes, which offers lower overhead on both UP and SMP.  When allocating
from or freeing to the per-cpu cache, without INVARIANTS enabled, we now
no longer perform any mutex operations, which offers a 1%-3% performance
improvement in a variety of micro-benchmarks.  We rely on critical
sections to prevent (a) preemption resulting in reentrant access to UMA on
a single CPU, and (b) migration of the thread during access.  In the event
we need to go back to the zone for a new bucket, we release the critical
section to acquire the global zone mutex, and must re-acquire the critical
section and re-evaluate which cache we are accessing in case migration has
occured, or circumstances have changed in the current cache.

Per-CPU cache statistics are now gathered lock-free by the sysctl, which
can result in small races in statistics reporting for caches.

Reviewed by:	bmilekic, jeff (somewhat)
Tested by:	rwatson, kris, gnn, scottl, mike at sentex dot net, others
2005-04-29 18:56:36 +00:00
Jeff Roberson
7625cbf3cc - Pass the ISOPEN flag to namei so filesystems will know we're about to
open them or otherwise access the data.
2005-04-27 09:05:19 +00:00
Kris Kennaway
f5fca0d8be Add the vm.exec_map_entries tunable and read-only sysctl, which controls
the number of entries in exec_map (maximum number of simultaneous execs
that can be handled by the kernel).  The default value of 16 is
insufficient on heavily loaded machines (particularly SMP machines), and
if it is exceeded then executing further processes will generate a SIGABRT.

This is a workaround until a better solution can be implemented.

Reviewed by:	alc
MFC after:	3 days
2005-04-25 19:22:05 +00:00
Dag-Erling Smørgrav
02dcaf2fd1 Unbreak the build on 64-bit architectures. 2005-04-16 12:37:16 +00:00
John Baldwin
3c3edcb445 Add a vm.blacklist tunable which can hold a space or comma seperated list
of physical addresses.  The pages containing these physical addresses will
not be added to the free list and thus will effectively be ignored by the
VM system.  This is mostly useful for the case when one knows of specific
physical addresses that have bit errors (such as from a memtest run) so
that one can blacklist the bad pages while waiting for the new sticks of
RAM to arrive.  The physical addresses of any ignored pages are listed in
the message buffer as well.
2005-04-15 21:45:02 +00:00
Christian S.J. Peron
c92163dcad Move MAC check_vnode_mmap entry point out from being exclusive to
MAP_SHARED so that the entry point gets executed un-conditionally.
This may be useful for security policies which want to perform access
control checks around run-time linking.

-add the mmap(2) flags argument to the check_vnode_mmap entry point
 so that we can make access control decisions based on the type of
 mapped object.
-update any dependent API around this parameter addition such as
 function prototype modifications, entry point parameter additions
 and the inclusion of sys/mman.h header file.
-Change the MLS, BIBA and LOMAC security policies so that subject
 domination routines are not executed unless the type of mapping is
 shared. This is done to maintain compatibility between the old
 vm_mmap_vnode(9) and these policies.

Reviewed by:	rwatson
MFC after:	1 month
2005-04-14 16:03:30 +00:00
John Baldwin
9fd0669542 Tidy vcnt() by moving a duplicated line above #ifdef and removing a useless
variable.
2005-04-12 23:15:28 +00:00
John Baldwin
a5c7ea5b9e Flip the switch and turn mpsafevm on by default for sparc64.
Approved by:	alc
2005-04-04 20:59:02 +00:00
Jeff Roberson
6e4b282039 - Don't NULL the vnode's v_object pointer until after the object is torn
down.  If we have dirty pages, the putpages routine will need to know
   what the vnode's object is so that it may write out dirty pages.

Pointy hat:	phk
Found by:	obrien
2005-04-03 22:56:58 +00:00
John Baldwin
98df9218da - Change the vm_mmap() function to accept an objtype_t parameter specifying
the type of object represented by the handle argument.
- Allow vm_mmap() to map device memory via cdev objects in addition to
  vnodes and anonymous memory.  Note that mmaping a cdev directly does not
  currently perform any MAC checks like mapping a vnode does.
- Unbreak the DRM getbufs ioctl by having it call vm_mmap() directly on the
  cdev the ioctl is acting on rather than trying to find a suitable vnode
  to map from.

Reviewed by:	alc, arch@
2005-04-01 20:00:11 +00:00
Jeff Roberson
f247a5240d - LK_NOPAUSE is a nop now.
Sponsored by:   Isilon Systems, Inc.
2005-03-31 04:37:09 +00:00
Alan Cox
c6ec6a7cae Eliminate (now) unnecessary acquisition and release of the global page
queues lock in vm_object_backing_scan().  Updates to the page's PG_BUSY
flag and busy field are synchronized by the containing object's lock.

Testing the page's hold_count and wire_count in vm_object_backing_scan()'s
OBSC_COLLAPSE_NOWAIT case is unnecessary.  There is no reason why the held
or wired pages cannot be migrated to the shadow object.

Reviewed by: tegge
2005-03-30 05:40:02 +00:00
David Schultz
010b1ca16e Move the swap_zone == NULL check earlier (i.e. before we dereference
the pointer.)

Found by:	Coverity Prevent analysis tool
2005-03-18 21:22:48 +00:00
Jeff Roberson
ee39666a76 - Don't lock the vnode interlock in vm_object_set_writeable_dirty() if
we've already set the object flags.

Reviewed by:	alc
2005-03-17 12:03:42 +00:00
Jeff Roberson
761dbeb66f - In vm_page_insert() hold the backing vnode when the first page
is inserted.
 - In vm_page_remove() drop the backing vnode when the last page
   is removed.
 - Don't check the vnode to see if it must be reclaimed on every
   call to vm_page_free_toq() as we only check it now when it is
   actually required.  This saves us two lock operations per call.

Sponsored by:	Isilon Systems, Inc.
2005-03-15 14:14:09 +00:00
Jeff Roberson
7747c03884 - Don't directly adjust v_usecount, use vref() instead.
Sponsored by:	Isilon Systems, Inc.
2005-03-14 09:03:19 +00:00
Jeff Roberson
1d39df3fe9 - Retire OLOCK and OWANT. All callers hold the vnode lock when creating
a vnode object.  There has been an assert to prove this for some time.

Sponsored by:	Isilon Systems, Inc.
2005-03-14 07:29:40 +00:00
Jeff Roberson
493d78b3bd - Don't acquire the vnode lock in destroy_vobject, assert that it has
already been acquired by the caller.

Sponsored by:	Isilon Systems, Inc.
2005-03-13 12:05:05 +00:00
Alan Cox
b70458aec3 Revert the first part of revision 1.114 and modify the second part. On
architectures implementing uma_small_alloc() pages do not necessarily
belong to the kmem object.
2005-02-24 06:13:01 +00:00
Poul-Henning Kamp
dfd4be14bd Try to unbreak the vnode locking around vop_reclaim() (based mostly on
patch from kan@).

Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on
close.  This is not yet a generally safe function, but for this very
specific use it is safe.  This solves the problem with buffers not
being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
Bosko Milekic
8076cb5289 Well, it seems that I pre-maturely removed the "All rights reserved"
statement from some files, so re-add it for the moment, until the
related legalese is sorted out.  This change affects:

sys/kern/kern_mbuf.c
sys/vm/memguard.c
sys/vm/memguard.h
sys/vm/uma.h
sys/vm/uma_core.c
sys/vm/uma_dbg.c
sys/vm/uma_dbg.h
sys/vm/uma_int.h
2005-02-16 21:45:59 +00:00
Bosko Milekic
500f29d06e Make UMA set the overloaded page->object back to kmem_object for
UMA_ZONE_REFCNT and UMA_ZONE_MALLOC zones, as the page(s) undoubtedly
came from kmem_map for those two.  Previously it would set it back
to NULL for UMA_ZONE_REFCNT zones and although this was probably not
fatal, it added MORE code for no reason.
2005-02-16 20:06:11 +00:00
Bosko Milekic
7fae6a1116 Rather than overloading the page->object field like UMA does, use instead
an unused pageq queue reference in the page structure to stash a pointer
to the MemGuard FIFO.  Using the page->object field caused problems
because when vm_map_protect() was called the second time to set
VM_PROT_DEFAULT back onto a set of pages in memguard_map, the protection
in the VM would be changed but the PMAP code would lazily not restore
the PG_RW bit on the underlying pages right away (see pmap_protect()).
So when a page fault finally occured and the VM noticed the faulting
address corresponds to a page that _does_ have write access now, it
would then call into PMAP to set back PG_RW (i386 case being discussed
here).  However, before it got to do that, an assertion on the object
lock not being owned would get triggered, as the object of the faulting
page would need to be locked but was overloaded by MemGuard.  This is
precisely why MemGuard cannot overload page->object.

Submitted by: Alan Cox (alc@)
2005-02-15 22:17:07 +00:00
Poul-Henning Kamp
7fbdc92113 sysctl node vm.stats can not be static (for ia64 reasons). 2005-02-11 16:34:14 +00:00
Bosko Milekic
0341256576 Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds
a little bit of complexity but performance requirements lacking (this is
a debugging allocator after all), it's really not too bad (still
only 317 lines).

Also add an additional check to help catch really weird 3-threads-involved
races: make memguard_free() write to the first page handed back, always,
before it does anything else.

Note that there is still a problem in VM+PMAP (specifically with
vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly
and this change stands on its own.
2005-02-10 22:36:05 +00:00
Poul-Henning Kamp
39a79f0c01 Make three SYSCTL_NODEs static 2005-02-10 12:18:36 +00:00
Poul-Henning Kamp
253de0a143 Make npages static and const. 2005-02-10 12:18:17 +00:00
Suleiman Souhlal
81ae703462 Set the scheduling class of the zeroidle thread to PRI_IDLE.
Reviewed by:	jhb
Approved by:	grehan (mentor)
MFC after:	1 week
2005-02-04 06:18:31 +00:00
Alan Cox
8e99783b25 Update the text of an assertion to reflect changes made in revision 1.148.
Submitted by: tegge

Eliminate an unnecessary, temporary increment of the backing object's
reference count in vm_object_qcollapse().  Reviewed by: tegge
2005-01-30 21:29:47 +00:00
Poul-Henning Kamp
7146d6cb3e Move the contents of vop_stddestroyvobject() to the new vnode_pager
function vnode_destroy_vobject().

Make the new function zero the vp->v_object pointer so we can tell
if a call is missing.
2005-01-28 08:56:48 +00:00
Poul-Henning Kamp
8516dd18e1 Don't use VOP_GETVOBJECT, use vp->v_object directly. 2005-01-25 00:40:01 +00:00
Poul-Henning Kamp
d07a6d3f61 Move the body of vop_stdcreatevobject() over to the vnode_pager under
the name Sande^H^H^H^H^Hvnode_create_vobject().

Make the new function take a size argument which removes the need for
a VOP_STAT() or a very pessimistic guess for disks.

Call that new function from vop_stdcreatevobject().

Make vnode_pager_alloc() private now that its only user came home.
2005-01-24 21:21:59 +00:00
Poul-Henning Kamp
35764be39e Kill the VV_OBJBUF and test the v_object for NULL instead. 2005-01-24 13:13:57 +00:00
Jeff Roberson
ae51ff1127 - Remove GIANT_REQUIRED where giant is no longer required.
- Use VFS_LOCK_GIANT() rather than directly acquiring giant in places
   where giant is only held because vfs requires it.

Sponsored By:   Isilon Systems, Inc.
2005-01-24 10:48:29 +00:00
Alan Cox
75337a5677 Guard against address wrap in kernacc(). Otherwise, a program accessing a
bad address range through /dev/kmem can panic the machine.

Submitted by: Mark W. Krentel
Reported by: Kris Kennaway
MFC after: 1 week
2005-01-22 19:21:29 +00:00
Bosko Milekic
eca64e79b5 s/round_page/trunc_page/g
I meant trunc_page.  It's only a coincidence this hasn't caused
problems yet.

Pointed out by: Antoine Brodin <antoine.brodin@laposte.net>
2005-01-22 00:09:34 +00:00
Bosko Milekic
e4eb384b47 Bring in MemGuard, a very simple and small replacement allocator
designed to help detect tamper-after-free scenarios, a problem more
and more common and likely with multithreaded kernels where race
conditions are more prevalent.

Currently MemGuard can only take over malloc()/realloc()/free() for
particular (a) malloc type(s) and the code brought in with this
change manually instruments it to take over M_SUBPROC allocations
as an example.  If you are planning to use it, for now you must:

	1) Put "options DEBUG_MEMGUARD" in your kernel config.
	2) Edit src/sys/kern/kern_malloc.c manually, look for
	   "XXX CHANGEME" and replace the M_SUBPROC comparison with
	   the appropriate malloc type (this might require additional
	   but small/simple code modification if, say, the malloc type
	   is declared out of scope).
	3) Build and install your kernel.  Tune vm.memguard_divisor
	   boot-time tunable which is used to scale how much of kmem_map
	   you want to allott for MemGuard's use.  The default is 10,
	   so kmem_size/10.

ToDo:
	1) Bring in a memguard(9) man page.
	2) Better instrumentation (e.g., boot-time) of MemGuard taking
	   over malloc types.
	3) Teach UMA about MemGuard to allow MemGuard to override zone
	   allocations too.
	4) Improve MemGuard if necessary.

This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
Alan Cox
986b43f845 Add checks to vm_map_findspace() to test for address wrap. The conditions
where this could occur are very rare, but possible.

Submitted by: Mark W. Krentel
MFC after: 2 weeks
2005-01-18 19:50:09 +00:00
Alan Cox
d936694f09 Consider three objects, O, BO, and BBO, where BO is O's backing object
and BBO is BO's backing object.  Now, suppose that O and BO are being
collapsed.  Furthermore, suppose that BO has been marked dead
(OBJ_DEAD) by vm_object_backing_scan() and that either
vm_object_backing_scan() has been forced to sleep due to encountering
a busy page or vm_object_collapse() has been forced to sleep due to
memory allocation in the swap pager.  If vm_object_deallocate() is
then called on BBO and BO is BBO's only shadow object,
vm_object_deallocate() will collapse BO and BBO.  In doing so, it adds
a necessary temporary reference to BO.  If this collapse also sleeps
and the prior collapse resumes first, the temporary reference will
cause vm_object_collapse to panic with the message "backing_object %p
was somehow re-referenced during collapse!"

Resolve this race by changing vm_object_deallocate() such that it
doesn't collapse BO and BBO if BO is marked dead.  Once O and BO are
collapsed, vm_object_collapse() will attempt to collapse O and BBO.
So, vm_object_deallocate() on BBO need do nothing.

Reported by: Peter Holm on 20050107
URL: http://www.holm.cc/stress/log/cons102.html

In collaboration with: tegge@
Candidate for RELENG_4 and RELENG_5
MFC after: 2 weeks
2005-01-15 21:12:47 +00:00
Poul-Henning Kamp
7c0745eeae Eliminate unused and unnecessary "cred" argument from vinvalbuf() 2005-01-14 07:33:51 +00:00
Poul-Henning Kamp
8df6bac4c7 Remove the unused credential argument from VOP_FSYNC() and VFS_SYNC().
I'm not sure why a credential was added to these in the first place, it is
not used anywhere and it doesn't make much sense:

	The credentials for syncing a file (ability to write to the
	file) should be checked at the system call level.

	Credentials for syncing one or more filesystems ("none")
	should be checked at the system call level as well.

	If the filesystem implementation needs a particular credential
	to carry out the syncing it would logically have to the
	cached mount credential, or a credential cached along with
	any delayed write data.

Discussed with:	rwatson
2005-01-11 07:36:22 +00:00
Bosko Milekic
c5c1b16ec5 While we want the recursion protection for the bucket zones so that
recursion from the VM is handled (and the calling code that allocates
buckets knows how to deal with it), we do not want to prevent allocation
from the slab header zones (slabzone and slabrefzone) if uk_recurse is
not zero for them.  The reason is that it could lead to NULL being
returned for the slab header allocations even in the M_WAITOK
case, and the caller can't handle that (this is also explained in a
comment with this commit).

The problem analysis is documented in our mailing lists:
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=153445+0+archive/2004/freebsd-current/20041231.freebsd-current

(see entire thread for proper context).

Crash dump data provided by: Peter Holm <peter@holm.cc>
2005-01-11 03:33:09 +00:00
Stefan Farfeleder
1e183df21e ISO C requires at least one element in an initialiser list. 2005-01-10 20:30:04 +00:00
Alan Cox
5ba514bc89 Move the acquisition and release of the page queues lock outside of a loop
in vm_object_split() to avoid repeated acquisition and release.
2005-01-08 23:41:11 +00:00
Alan Cox
46fbc58202 Transfer responsibility for freeing the page taken from the cache
queue and (possibly) unlocking the containing object from
vm_page_alloc() to vm_page_select_cache().  Recent optimizations to
vm_map_pmap_enter() (see vm_map.c revisions 1.362 and 1.363) and
pmap_enter_quick() have resulted in panic()s because vm_page_alloc()
mistakenly unlocked objects that had not been locked by
vm_page_select_cache().

Reported by: Peter Holm and Kris Kennaway
2005-01-07 05:02:19 +00:00