With this change and previous work from ray@ it will be possible to put
both in GENERIC, and have one enabled by default, but allow the other to
be selected via the loader.
(The previous implementation had separate kern.vt.disable and
hw.syscons.disable tunables, and would panic if both drivers were
compiled in and neither was explicitly disabled.)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
is identified as "DOS/MBR boot sector" as opposed to "x86 boot sector".
This trips up vmrun.sh when using the new file(1) and makes it want to boot
into the installer instead.
Fix this by just looking for "boot sector" instead.
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
If passed cm->cmsg_len was below cmsghdr size the experssion:
datalen = (caddr_t)cm + cm->cmsg_len - (caddr_t)data;
would give negative result. However, in practice it would not
result in a crash because the kernel would try to obtain garbage fds
for given process and would error out with EBADF.
PR: 124908
Submitted by: campbell mumble.net (modified a little)
MFC after: 1 week
similar to -g.)
- Document -U to set the SMBIOS UUID.
- Add missing options to the usage output and to the manpage Synopsis.
- Don't claim that bvmdebug is amd64-only (it is also a device, not an
option).
Instead of trying to guess size of disk I/O operations (it just won't work
that way for newly added commands, and is equal to data move size for old
ones), account data move traffic. If disk I/Os are that interesting, then
backends have to account and provide that information.
Block backend already exports the information about disk I/Os via devstat,
so having it here too is excessive.
MFC after: 2 weeks
2915 DTrace in a zone should see "cpu", "curpsinfo", et al
2916 DTrace in a zone should be able to access fds[]
2917 DTrace in a zone should have limited provider access
MFC after: 2 weeks
configs. Switch the BERI_NETFPGA_MDROOT to 64bit by default.
Give we have working interrupts also cleanup the extra polling CFLAGS from
the module Makefile.
MFC after: 2 weeks
time by setting NF10BMAC_64BIT and using a REGWTYPE #define to set correct
variable and return value widths.
Adjust comments to indicate the 32 or 64bit register widths.
MFC after: 2 weeks
have to undo it by calling crfree(). This reduces the total number of calls
by vm_map_insert() to crhold() and crfree() by 45% in my tests.
Eliminate an unnecessary variable from vm_map_insert().
Reviewed by: kib
Tested by: pho
- style(9)
TODO: When AI_ADDRCONFIG is specified, getaddrinfo() can
be quite slow for system with many interfaces. We should
have some kernel sysctls to report IPv4/IPv6 status.
Spotted by: melifaro
MFC after: 1 week
This gives some use to 512KB per-LUN buffers, allocated for Copan-specific
processor code and not used. It allows, for example, to test transport
performance and/or correctness without accessing the media, as supported
by Linux version of sg3_utils.
MFC after: 2 weeks
<sys/time.h>. INT64_MAX actually requires __INT64_C() hack to get the
type right on exotic architectures (e.g. on ones with 63-bit ints or long
0x7fffffffffffffff is unsigned int or long). The hardcoded LL suffix is
good enough to avoid these problems for SBT_MAX (it makes the type always
signed long long, without overflow since long long has at least 64 bits).
Many thanks to Bruce Evans for the time spent me to explain this.
Reported by: bde
Reviewed by: bde
map the bucket to an RSS queue, then map the queue to a CPU ID.
This way the bucket->queue and queue->CPU mapping can change
over time.
Introduce IP_RSSBUCKETID - which instead looks up the RSS bucket.
User applications can then map the RSS bucket to a CPU.
There's 128 indirection table entries which correspond to the
low 7 bits of the 32 bit RSS hash. Each value will correspond
to an RSS bucket. (Then each RSS bucket currently will map
to a CPU.)
This is a more explicit way of figuring out which RSS bucket
is in each RSS indirection slot. It can be inferred by the other
methods but I'd rather drivers use something more simplified and
explicit.
This is different than the amount shown for the process e.g. by
/usr/bin/top - that is the mappings faulted in by the mmap'd region
of guest memory.
The values can be fetched with bhyvectl
# bhyvectl --get-stats --vm=myvm
...
Resident memory 413749248
Wired memory 0
...
vmm_stat.[ch] -
Modify the counter code in bhyve to allow direct setting of a counter
as opposed to incrementing, and providing a callback to fetch a
counter's value.
Reviewed by: neel
PCI root bridges except for the one known-valid case on x86 where bridges
claim the I/O port registers used for PCI config space access.
Tested by: Hilko Meyer <hilko.meyer@gmx.de>
MFC after: 1 week
Split global ctl_lock, historically protecting most of CTL context:
- remaining ctl_lock now protects lists of fronends and backends;
- per-LUN lun_lock(s) protect LUN-specific information;
- per-thread queue_lock(s) protect request queues.
This allows to radically reduce congestion on ctl_lock.
Create multiple worker threads, depending on number of CPUs, and assign
each LUN to one of them. This allows to spread load between multiple CPUs,
still avoiging congestion on queues and LUNs locks.
On 40-core server, exporting 5 LUNs, each backed by gstripe of SATA SSDs,
accessed via 6 iSCSI connections, this change improves peak request rate
from 250K to 680K IOPS.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
While for FreeBSD client that is only a minor optimization, VMWare client
doesn't support additional data requests after all data being sent once as
immediate.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
