1.21
"Document the flags displayed by the default format, and mention their short
names. From espie@openbsd via jmc@openbsd."
1.24
"Fix three variable names.
From Todd T. Fries via Jason McIntyre."
Obtained from: wiz@NetBSD.org (previous 2)
1.25
"Be consistent: document the birthtime field of struct stat for
the "B" field specifier."
Obtained from: reed@NetBSD.org
1.26
"Drop trailing space."
Obtained from: wiz@NetBSD.org
1.27
"Since we have st_birthtime in struct stat, it is in default display."
Obtained from: enami@NetBSD.org
Purposely skipping the following revisions:
1.22 NetBSD-specific change
1.23 Removal of license clauses 3 and 4, already handled by imp
in our r203971
"Fix WARNS=4 issues (-Wcast-qual -Wsign-compare)"
Because of code differences I had to hand-apply parts of the patch,
so responsibility for errors goes to me.
Obtained from: lukem@NetBSD.org
"PR/34662: martijnb at atlas dot ipv6 dot stack dot nl: readlink doesn't
grok -f, and there's no alternative (+fix)
Patch applied with minor tweak (%y -> %R, as it was already taken) plus
some nits from myself. Thanks!"
Obtained from: elad@NetBSD.org
of the target, similar to realpath(1). See the discussion at:
http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=34662
This brings in the following changes:
1.24
"PR/34662: martijnb at atlas dot ipv6 dot stack dot nl: readlink doesn't
grok -f, and there's no alternative (+fix)
Patch applied with minor tweak (%y -> %R, as it was already taken) plus
some nits from myself. Thanks!"
Obtained from: elad@NetBSD.org
1.25
"Fix a segfault when doing 'stat -f %R' on the stdin file handle, instead
fake the filename '(stdin)' like the %N format."
Obtained from: mlelstv@NetBSD.org
1.27
"The ofmt variable is actually a bit mask (not the character that was
in the format string) so that we can "or" it with the bits in the
formats variable. This fixes the missing " -> " in front of the real
path (when you use %SR).
Also, the ?: needs another space."
Obtained from: atatat@NetBSD.org
I am purposely omitting the following changes:
1.23 A humanize_number(3) clone that should better be implemented by
actually using humanize_number(3)
1.26 This is the removal of license clause 3 and 4, already handled
by imp in r203971
"Fix a trivial truncation case, and eliminate a corner case that might
print a nul character."
I am purposely bypassing the following versions:
1.19 A build infrastructure change that does not apply to us
1.20 A feature I am not interested in, but don't object if someone else
wants to pick it up
1.21 A build infrastructure change that does not apply to us
Obtained from: atatat@NetBSD.org
"If using stat (the -L flag) and it fails, fall back to lstat(). It
may be the case that we're examining a broken symlink, and anything is
better than nothing."
The changes in 1.14 through 1.17 were not relevant to us.
Obtained from: atatat@NetBSD.org
thread specific informations.
In order to do that, and in order to avoid KBI breakage with existing
infrastructure the following semantic is implemented:
- For live programs, a new member to the PT_LWPINFO is added (pl_tdname)
- For cores, a new ELF note is added (NT_THRMISC) that can be used for
storing thread specific, miscellaneous, informations. Right now it is
just popluated with a thread name.
GDB, then, retrieves the correct informations from the corefile via the
BFD interface, as it groks the ELF notes and create appropriate
pseudo-sections.
Sponsored by: Sandvine Incorporated
Tested by: gianni
Discussed with: dim, kan, kib
MFC after: 2 weeks
it to kick off a new command before the previous has finished, resulting
in corrupted (interleaved) output. It is also fooled by non-exiting
children it did not start, failing to exit until all extraneous children
have exited.
This patch makes xargs keep track of children it starts, ignoring
pre-existing ones.
This was removed in 2001 but I think it is appropriate to add it back:
* I do not want to encourage people to write fragile and non-portable echo
commands by making printf much slower than echo.
* Recent versions of Autoconf use it a lot.
* Almost no software still wants to support systems that do not have
printf(1) at all.
* In many other shells printf is already a builtin.
Side effect: printf is now always the builtin version (which behaves
identically to /usr/bin/printf) and cannot be overridden via PATH (except
via the undocumented %builtin mechanism).
Code size increases about 5K on i386. Embedded folks might want to replace
/usr/bin/printf with a hard link to /usr/bin/alias.
Retransmitted Packets
Zero Window Advertisements
Out of Order Receives
These statistics are available via the -T argument to
netstat(1).
MFC after: 2 weeks
with the -o option. Setting the flag for stderr (the default) could
cause the traced process to redirect stderr to a random file.
PR: bin/152151
Submitted by: ashish
MFC after: 5 days
using an updated flex(1) binary.
Also ignore the changing $FreeBSD$ ID lines when doing the diff.
This needs additional obfuscation, to not upset the svn precommit
hooks :/
The crash was caused by a command line such as this one:
# foldl -b1
PR: bin/151592
Reported by: Marcus Reid <marcus@blazingdot.com>
Tested by: Marcus Reid <marcus@blazingdot.com>
MFC after: 3 days
and not something out of the early 1980s. Make sure all error
messages go to stderr, not stdout. Since there's error-handling code
to handle empty SEARCHPATHS and FILESYSTEMS, use the initialization
form that allows this error to be diagnosed. (hat tip: jilles@)
made it impossible to override PRUNEDIRS to make it empty. Use the
non-colon form to only set PRUNEDIRS if it is completely unset. (For
parallelism, the other configuration defaults here could be done the
same way, but that could be more obviously accomplished by disabling
updatedb in periodic.conf, so leave them alone for now.)
are in the filesystem from the locate database. By default, exclude
".zfs" directories, as users who who have set snapdir=visible and are
taking frequent snapshots most likely do not want the snapshots
included in the locate database.
It's a bit more pedantic regarding .Bl list elements. This has an added
benefit of unbreaking the ipfw(8) manpage, where groff was silently
skipping one list element.
Using a separate process group here is bad, since (for example) job
control in the TTY layer prevents interaction with the TTY, causing the
child process to hang.
Mentioned on: current@
MFC after: 2 weeks
data. White space should be accepted anywhere in a base64 encoded
stream, not just after every chunk (4 characters).
Test-scenario:
VmVsb2NpdHkgUmV3YXJkcw==
and
VmVsb2NpdHkgUmV3YXJkcw
==
should both produce "Velocity Rewards"
PR: bin/124739
Submitted by: Mark Andrews <marka@isc.org>
MFC after: 2 weeks
When set, it forces all timestamps and owners to zero and
modes to 0644. Useful for producing libraries that are
bitwise identical across multiple build runs.
Submitted by: Erik Cederstrand
Reviewed by: Kai Wang
commandline. This mirrors the old (undocumented) GNU man functionality.
Also document this feature in the implementation notes section of
the manpage.
Submitted by: arundel
Approved by: wes (mentor implicit)
makes on FreeBSD/pc98. The need for this hack has passed. If you are
one of the rare people that may need this, then you should setenv
MACHINE=pc98 as a workaround.
also in the base set, the man utility when invoked with -a would display
pages for each locale in the same tree:
$ LANG=en_GB.ISO8859-15 man -wa man
/usr/share/man/en.ISO8859-15/man1/man.1.gz
/usr/share/man/man1/man.1.gz
/usr/share/man/en.ISO8859-15/man7/man.7.gz
/usr/share/man/man7/man.7.gz
Use continue to break out of the loop for the current locale. This results
in behavior more closely matching the old GNU man implementation:
$ LANG=en_GB.ISO8859-15 man -wa man
/usr/share/man/en.ISO8859-15/man1/man.1.gz
/usr/share/man/en.ISO8859-15/man7/man.7.gz
This will still search for a copy of the file in other manual path
locations. If there was a /usr/local/man/man1/man.1.gz file, it would still
be displayed. This is also consistent with the GNU man implementation.
Submitted by: arundel
Approved by: wes (mentor implicit)
Features of this new version in favor of the old one:
BSD licensed -- old one is GPL.
Imports configuration from /etc/man.conf and LOCALBASE/etc/man.d/*.conf
allowing ports to extend the base functionality. The pluggable
configuration can supplement the manual search path (retiring use.perl),
add locales, and override language specific toolsets (attempt to merge
the japanese/man port into the base system as much as possible).
Much effort has been made to make this version mirror the functionality
of the existing implementation. For 99% of users, it should be a drop in
replacement.
PR: gnu/143271, gnu/4419
Reviewed by: dougb (previous versions)
Approved by: wes (mentor)
of faulting, check for NULL. However, returning an error would cause csup
to just abort the entire update. Instead, break out of the loop and
return ok. The attempts to update the file will trigger a MD5 failure which
will cause csup to download the entire file as a fixup.
Reviewed by: lulf
MFC after: 1 week
A closing bracket immediately after '[=' should not be treated as special.
Different from the submitted patch, a string ending with '[=' does not cause
access beyond the terminating '\0'.
PR: bin/150384
Submitted by: Richard Lowe
MFC after: 2 weeks
It is not clear to what this copyright should apply, and this is in line
with what other operating systems do.
For ssh specifically, printing of the copyright string is not in the
upstream version so this reduces our FreeBSD-local diffs.
Approved by: core, des (ssh)
not optimal from a performance standpoint since the write buffer is
not necessarily be filled up when the inflate rountine reached the
end of input buffer and it's not the end of file.
This problem gets uncovered by trying to pipe gunzip -c output to
a GEOM device directly, which enforces the writes be multiple of
sector size.
Sponsored by: iXsystems, Inc.
Reported by: jpaetzel
MFC after: 2 weeks
the name of the typescript file.
+ Add the 'command' argument (if supplied on the command line) to the
typescript file. This creates a more complete typescript when invoked
this way - more equal to invoking script without supplying the 'command'
argument.
bitwise parameters (e.g. mmap), print the syscall parameter value first.
The resulting output looks like the %b specifier of printf(9).
Before:
mmap(0,0x8000,PROT_READ|PROT_WRITE,...
After:
mmap(0,0x8000,0x3<PROT_READ|PROT_WRITE>,...
Submitted by: Norberto Lopes <nlopes.ml at gmail.com>
Idea from: freebsd-arch/2006-April/005116.html
Octal escape sequences are expanded to bytes, not characters, and multiple
are required for a multibyte character.
The valid escape sequences in %b strings are slightly different from the
escape sequences in the format string.
- Imply -h if single file is grepped, this is the GNU behaviour
This is already done by code above the change and have caused a regression
since this instance of code does not check Hflag.
Reported by: davidxu
Pointy hat to: delphij
instead of stdio. This gives BSD grep a very big performance boost,
its speed is now almost comparable to GNU grep.
Submitted by: Dimitry Andric <dimitry@andric.com>
Approved by: delphij (mentor)
All these functions and variables are local to this compilation unit, so
there is no reason why we shouldn't mark them static. This slightly
reduces the binary size.
former may be safer but in this case it doesn't add extra
safety [1]
- Fix -w option [2]
- Fix handling of GREP_OPTIONS [3]
- Fix --line-buffered
- Make stdin input imply --line-buffered so that tail -f can be piped
to grep [4]
- Imply -h if single file is grepped, this is the GNU behaviour
- Reduce locking overhead to gain some more performance [5]
- Inline some functions to help the compiler better optimize the code
- Use shortcut for empty files [6]
PR: bin/149425 [6]
Prodded by: jilles [1]
Reported by: Alex Kozlov <spam@rm-rf.kiev.ua> [2] [3],
swell.k@gmail.com [2],
poyopoyo@puripuri.plala.or.jp [4]
Submitted by: scf [5],
Shuichi KITAGUCHI <ki@hh.iij4u.or.jp> [6]
Approved by: delphij (mentor)
uname and gname weren't overwritten, so the
disk restore would use those to lookup the
original uid/gid again. Clearing the uname
and gname prevents this.
Reported by: swell.k
MFC after: 7 days
and exclusion patterns [1]
- Some improvements on the exiting code, like replacing memcpy with
strlcpy/strcpy
Approved by: delphij (mentor)
Pointed out by: bf [1], des [1]
or if forced mode is specified [1]
- While here, add some alternative names for the options and make then
case-insensitive
- Fix -q and -l behaviour [2]
- Some small changes to make the code easier to review
Submitted by: swell.k@gmail.com [1],
dougb [2]
Approved by: delphij (mentor)
- Explicitly pre-zero memory for fts_open parameters.
- Don't test against directory patterns when we are testing direct
leaf of current directory.
While I'm there plug a few of memory leaks.
- Fix two minor nits in manpage [2]
- style.Makefile(5)
Submitted by: pluknet <pluknet at gmail.com> [1],
Alex Kozlov <spam@rm-rf.kiev.ua> [2]
Reviewed by: delphij
Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC),
lower memory usage than GNU grep, GNU compatibility,
BSD license.
TODO: Performance is somewhat behind GNU grep but it is only
significant for bigger searches. The reason is complex, the
most important factor is that GNU grep uses lots of
optimizations to improve the speed of the regex library.
First, we need a modern regex library (practically by adopting
TRE), add support for GNU-style non-standard regexes and then
reevalute the performance issues and look for bottlenecks. In
the meantime, for those, who need better performance, it is
possible to build GNU grep by setting WITH_GNU_GREP.
Approved by: delphij (mentor)
Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/),
freegrep (http://github.com/howardjp/freegrep)
Sponsored by: Google SoC 2008
Portbuild tests run by: kris, pav, erwin
Acknowledgements to: fjoe (as SoC 2008 mentor),
everyone who helped in reviewing and testing
-fno-rtti. The clang libaries that really use exceptions and virtual
functions can enable LLVM_REQUIRES_EH and LLVM_REQUIRES_RTTI
respectively. This saves space on the resulting binaries and follows
what's being done upstream.
Submitted by: Dimitry Andric <dimitry at andric.com>
This commit merges the latest LLVM sources from the vendor space. It
also updates the build glue to match the new sources. Clang's version
number is changed to match LLVM's, which means /usr/include/clang/2.0
has been renamed to /usr/include/clang/2.8.
Obtained from: projects/clangbsd
default invokation):
- Right now if segments are not writable are not included. Remove this.
- Right now if a segment is mapped with NOCORE the check is not honoured.
Change this by checking the newly added flag, from libutil,
KVME_FLAG_NOCOREDUMP.
Besides that, add a new flag (-f) that forces a 'full' dump of all the
segments excluding just the malformed ones. This might be used very
carefully as, among the reported segments, there could be memory
mapped areas that could be vital to program execution.
Sponsored by: Sandvine Incorporated
Discussed with: kib
Reviewed by: emaste
Tested by: Sandvine Incorporated
MFC after: 2 weeks
the same fix present in NetBSD.
Note: the getopt man page contains more antique information like this.
An overhaul of the man page and/or sync with NetBSD would be the right
thing to do. But since this is out of the scope of the PR, I'll leave
it as it is for now.
PR: docs/133118
Submitted by: Oleg A. Mamontov (oleg at mamontov dot net)
Discussed with: jilles@
MFC after: 2 weeks
is still one issue on FreeBSD/arm (signed vs unsigned char) which prevents
actually bumping this to WARNS=6 - I'm still considering the correct
solution to this issue.
Tested by: make universe
to print the stats were using an uninitialised variable. [1]
Fix trasnfer statistics in the "receive file" case - the statistics struct
was being cleared both before and after the initial connect to the remote
server. As a result, the printed time and calculated bandwidth covers
the time to connect ad well as the time to transfer the file. This may
not be ideal, but now at least matches the "send file" case.
Found by: clang static analyser [1]
Reviewed by: imp
This switch makes it a lot easier to locate problem areas when a process
is threatening to consume all of your disk space.
PR: 144192
Submitted by: gk
MFC after: 3 weeks
of times the system was forced to sleep when requesting a new allocation.
Expand the debugger hook, db_show_uma, to display these results as well.
This has proven to be very useful in out of memory situations when
it is not known why systems have become sluggish or fail in odd ways.
Reviewed by: rwatson alc
Approved by: scottl (mentor) peter
Obtained from: Yahoo Inc.
report the compression ratio as 0% instead of displaying
nonsense triggered by numeric overflow. This is common
when dealing with uncompressed files when the I/O blocking
causes there to be small transient differences in the
accounting.
Thanks to: Boris Samorodov
This avoids errors or __DECONST() from places with higher WARNS levels.
Adjust a local cache variable in ipcs to const as well
to compile in the new world order.
Suggested by: jhb
Reviewed by: jhb, kib, brueffer (man)
There's a parsing error for fields where addresses are not separated by
space. This is often produced by MS Outlook, eg.:
Cc: <foo@bar.com>,"Mr Foo" <foo@baz.com>
The following line now splits into the right tokens:
Cc: f@b.com,z@y.de, <a@a.de>,<c@c.de>, "foo" <foo>,"bar" <bar>
PR: bin/131861
Submitted by: Pete French <petefrench at ticketswitch.com>
Tested by: Pete French
Reviewed by: mikeh
MFC after: 2 weeks
utilities and related support files for manual pages, which were previously
controlled by MAN. For POLA, the default depends on MAN, i.e., WITHOUT_MAN
implies WITHOUT_MAN_UTILS and WITH_MAN implies WITH_MAN_UTILS. This patch
is slightly improved by me from:
PR: misc/145212
ar(1)'s dependencies on compressor libraries -lz, -lbz2 and -llzma and
fixes building HEAD on some versions of FreeBSD[78]. Option -j and -z
is now accepted but ignored.
Compressed ar(1) archives are not useful without a ld(1) that can read
them. Also, the current ar(1) compression scheme prevents random
access of archive members and needs to be redesigned anyway.
Submitted by: kientzle (original patch)
Reviewed by: delphij
Discussed on: -current mailing list
bottom of the manpages and order them consistently.
GNU groff doesn't care about the ordering, and doesn't even mention
CAVEATS and SECURITY CONSIDERATIONS as common sections and where to put
them.
Found by: mdocml lint run
Reviewed by: ru
- Upper case the first character of an description
- Section headings do not need to be quoted. From OpenBSD's make.1, revision 1.81
- Plural of suffix is suffixes. From OpenBSD's make.1, revision 1.61
- s/seperating/separating/
PR: 135165
Submitted by: Alan R. S. Bueno <alan.bsd@gmail.com>
MFC after: 1 week
Adjust dependencies for programs using libarchive
Add xz and linkage against liblzma to rescue system
Approved by: kientzle, delphij (mentor)
MFC after: 2 weeks
This joint work of Dag-Erling Smørgrav and myself updates the
FFS quota system to support both traditional 32-bit and new 64-bit
quotas (for those of you who want to put 2+Tb quotas on your users).
By default quotas are not compiled into the kernel. To include them
in your kernel configuration you need to specify:
options QUOTA # Enable FFS quotas
If you are already running with the current 32-bit quotas, they
should continue to work just as they have in the past. If you
wish to convert to using 64-bit quotas, use `quotacheck -c 64';
if you wish to revert from 64-bit quotas back to 32-bit quotas,
use `quotacheck -c 32'.
There is a new library of functions to simplify the use of the
quota system, do `man quotafile' for details. If your application
is currently using the quotactl(2), it is highly recommended that
you convert your application to use the quotafile interface.
Note that existing binaries will continue to work.
Special thanks to John Kozubik of rsync.net for getting me
interested in pursuing 64-bit quota support and for funding
part of my development time on this project.
sigvec(2) references have been updated to sigaction(2), sigsetmask(2) and
sigblock(2) to sigprocmask(2), sigpause(2) to sigsuspend(2).
Some legacy man pages still refer to them, that is OK.
lot better than what's in the tree now. Edwin tested it at a prior
employer, but can't test it today. I've found that it works a lot
better with the various uboot versions that I've used in my embedded
work. Here's the pkg-descr from the port that describes the changes:
It all started when we got some new routers, which told me the
following when trying to upload configuration or download images
from it: The TFTP server doesn't support the blocksize option.
My curiousity was triggered, it took me some reading of RFCs and
other documentation to find out what was possible and what could
be done. Was plain TFTP very simple in its handshake, TFTP with
options was kind of messy because of its backwards capability: The
first packet returned could either be an acknowledgement of options,
or the first data packet.
Going through the source code of src/libexec/tftpd and going through
the code of src/usr.bin/tftp showed that there was a lot of duplicate
code, and the addition of options would only increase the amount
of duplicate code. After all, both the client and the server can
act as a sender and receiver.
At the end, it ended up with a nearly complete rewrite of the tftp
client and server. It has been tested against the following TFTP
clients and servers:
- Itself (yay!)
- The standard FreeBSD tftp client and server
- The Fedora Core 6 tftp client and server
- Cisco router tftp client
- Extreme Networks tftp client
It supports the following RFCs:
RFC1350 - THE TFTP PROTOCOL (REVISION 2)
RFC2347 - TFTP Option Extension
RFC2348 - TFTP Blocksize Option
RFC2349 - TFTP Timeout Interval and Transfer Size Options
RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability
Statement for the Trivial File Transfer Protocol (TFTP)
It supports the following unofficial TFTP Options as described at
http://www.compuphase.com/tftp.htm:
blksize2 - Block size restricted to powers of 2, excluding protocol headers
rollover - Block counter roll-over (roll back to zero or to one)
From the tftp program point of view the following things are changed:
- New commands: "blocksize", "blocksize2", "rollover" and "options"
- Development features: "debug" and "packetdrop"
If you try this tftp/tftpd implementation, please let me know if
it works (or doesn't work) and against which implementaion so I can
get a list of confirmed working systems.
Author: Edwin Groothuis <edwin@FreeBSD.org>
Spaces and various other characters in pathnames are not passed through
literally by xargs in its default mode. Instead, use find . -exec ... {} +
Although the -- argument is not strictly required here, add it anyway to
avoid surprises when modifying the code to find -f -somedir ...
MFC after: 1 week
This option checks for empty pathnames and components starting with '-'.
Our -p option also checks for the latter, which remains the case.
MFC after: 1 week
Because script(1) now reliably terminates when the TTY is closed, it may
be the case that the call to wait3() occurs just before the child
process exits. This causes error codes to be ignored.
Just change script(1) to use waitpid() instead of wait3(). This makes it
more portable and prevents the need for a loop, since waitpid() only
returns a specified process.
PR: bin/146189
Tested by: amdmi3@, older version
MFC after: 2 weeks
handler, as the latter is not guaranteed to be signal safe, and we
do not really care about flushing the stream during SIGINT.
Suggested by: Maxim Konovalov <maxim.konovalov gmail com>
MFC after: 13 days
These are specified by POSIX but are not special builtins, and therefore
need to be available via execve() and utilities like time, nohup, xargs.
(Note that hash was moved from the XSI option to the base in the 2008
standard.)
Like most of the POSIX "regular builtin commands", these need to be executed
in a shell environment for full functionality, although they may still be of
some use outside one.
Unlike the POSIX special and regular builtin commands, POSIX does not
require these to be found before a PATH search, although that could be an
oversight.
Like some of the utilities already provided by usr.bin/alias, these may lead
to confusing results when invoked from csh(1).
