When building ENA as compiled into the kernel, the driver would fail to
build. Resolve the problem by introducing the following changes:
1. Add missing `ena_rss.c` entry in `sys/conf/files`.
2. Prevent SYSCTL_ADD_INT from throwing an assert due to an extra
CTLTYPE_INT flag.
Fixes: 986e7b9227 ("ena: Move RSS logic into its own source files")
Fixes: 6d1ef2abd3 ("ena: Implement full RSS reconfiguration")
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
MFC after: 1 week
ib_uverbs_flow_resources_free() is declard in two header files in
upstream OFED. Disable the warning to avoid introducing diffs to fix
the build on GCC 9.
While here, fix the ibcore module to disable the same warnings
disabled in OFED_CFLAGS.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D31943
- kern_kcov.c needs to be compiled with -fsanitize=kernel-memory when
KMSAN is configured since it calls into various other subsystems.
- Disable address and memory sanitizers in kcov(4)'s coverage sanitizer
callbacks, as they do not provide useful checking. Moreover, with
KMSAN we may otherwise get false positives since the caller (coverage
sanitizer runtime) is not instrumented.
- Disable KASAN and KMSAN interceptors in subr_coverage.c, as they do
not provide any benefit but do introduce overhead when fuzzing.
Sponsored by: The FreeBSD Foundation
The file as is is the maze of #ifdef passages, all slightly different.
Divorcing i386 and amd64 version actually makes changing the code
easier, also no changes for i386 are planned.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31931
- Re-implement pcib interface to use standard pci bus driver on top of
vmd(4) instead of custom one.
- Re-implement memory/bus resource allocation to properly handle even
complicated configurations.
- Re-implement interrupt handling to evenly distribute children's MSI/
MSI-X interrupts between available vmd(4) MSI-X vectors and setup them
to be handled by standard OS mechanisms with minimal overhead, except
sharing when unavoidable.
Successfully tested on Dell XPS 13 laptop with Core i7-1185G7 CPU (VMD
device ID 0x9a0b) and single NVMe SSD, dual-booting with Windows 10.
Successfully tested on Supermicro X11DPI-NT motherboard with Xeon(R)
Gold 6242R CPUs (VMD device ID 0x201d), simultaneously handling NVMe
SSD on one PCIe port and PLX bridge with 3 NVMe and 1 AHCI SSDs on
another. Handles SSD hot-plug (except Optane 905p for some reason,
which are not detected until manual bus rescan) and enabled IOMMU
(directly connected SSDs work, but ones connected to the PLX fail
without errors from IOMMU).
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential revision: https://reviews.freebsd.org/D31762
Switch the main syscall table to use CAPENABLED flags rather than
capabilities.conf. This avoid synchronization issues between
syscalls.master and capabilities.conf (e.g. when renaming a syscall
during development).
For now, move capabilities.conf to sys/compat/freebsd32 and use it
there. Use of sys/compat/freebsd32/syscalls.master should be replaced
by makesyscalls.lua enhancements to allow the main one to be used.
This change results in no changes to generated files after running
`make sysent`.
Reviewed by: kevans, emaste
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D31350
Clang 13.0.0 now has a -Wunused-but-set-variable warning similar to the
one gcc has had for quite a while. Since this triggers *very* often for
our kernel builds, don't make it a hard error, but leave the warning
visible so is some incentive to fix the instances.
MFC after: 3 days
MANA is the new network adapter from Microsoft which will be available
in Azure public cloud. It provides SRIOV NIC as virtual function to
guest OS running on Hyper-V.
The code can be divided into two major parts. Gdma_main.c is the one to
bring up the hardware board and drives all underlying hardware queue
infrastructure. Mana_en.c contains all main ethernet driver code.
It has only tested and supported on amd64 architecture.
PR: 256336
Reviewed by: decui@microsoft.com
Tested by: whu
MFC after: 2 week
Relnotes: yes
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D31150
Add support for the KVM paravirtual clock device.
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29733
Make inclusion of `sys/x86/x86/pvclock.c` contingent on that of its
dependents.
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D31417
ISA 3.0 allows for nested radix translations with minimal to no
involvement of the hypervisor. This should make pseries signficantly
faster on POWER9 pseries instances, as fewer hypercalls are needed to
manage pmap now.
MFC after: 2 weeks
Relnotes: yes
KMSAN enables the use of LLVM's MemorySanitizer in the kernel. This
enables precise detection of uses of uninitialized memory. As with
KASAN, this feature has substantial runtime overhead and is intended to
be used as part of some automated testing regime.
The runtime maintains a pair of shadow maps. One is used to track the
state of memory in the kernel map at bit-granularity: a bit in the
kernel map is initialized when the corresponding shadow bit is clear,
and is uninitialized otherwise. The second shadow map stores
information about the origin of uninitialized regions of the kernel map,
simplifying debugging.
KMSAN relies on being able to intercept certain functions which cannot
be instrumented by the compiler. KMSAN thus implements interceptors
which manually update shadow state and in some cases explicitly check
for uninitialized bytes. For instance, all calls to copyout() are
subject to such checks.
The runtime exports several functions which can be used to verify the
shadow map for a given buffer. Helpers provide the same functionality
for a few structures commonly used for I/O, such as CAM CCBs, BIOs and
mbufs. These are handy when debugging a KMSAN report whose
proximate and root causes are far away from each other.
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
With current generation clang/llvm it can pass all of our tests in
libc/ssp.
While here, remove the extra MACHINE_CPUARCH check for mips. SSP is
included in BROKEN_OPTIONS for this architecture in src.opts.mk, which
is enough to ensure normal builds won't set SSP_CFLAGS.
Reviewed by: kevans, imp, emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31400
After recent arm64 GENERIC config cleanup the ENETC MDIO
in NXP LS1028A SoC should support being loaded as a module.
Obtained from: Semihalf
Sponsored by: Alstom Group
It is found on boards equipped with LS1028A SoC.
802.1q VLAN grouping is supported.
An external MDIO device is used for communicating with PHYs.
The driver is built as a module by default, it is not included
in GENERIC kernel config.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30923
Allow any 2M aligned contiguous location below 4G for the staging
area location. It should still be mapped by loader at KERNBASE.
The assumption kernel makes about loader->kernel handoff with regard to
the MMU programming are explicitly listed at the beginning of hammer_time(),
where kernphys is calculated. Now kernphys is the variable instead of
symbol designating the physical address.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31121
KASAN and KCSAN implement interceptors for various primitive operations
that are not instrumented by the compiler. KMSAN requires them as well.
Rather than adding new cases for each sanitizer which requires
interceptors, implement the following protocol:
- When interceptor definitions are required, define
SAN_NEEDS_INTERCEPTORS and SANITIZER_INTERCEPTOR_PREFIX.
- In headers that declare functions which need to be intercepted by a
sanitizer runtime, use SANITIZER_INTERCEPTOR_PREFIX to provide
declarations.
- When SAN_RUNTIME is defined, do not redefine the names of intercepted
functions. This is typically the case in files which implement
sanitizer runtimes but is also needed in, for example, files which
define ifunc selectors for intercepted operations.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The timer is not used on ARM.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29041
Minor changes are necessary to make this processor-independent, but
moving the file out of x86 and into common is the first step (so
others don't add /more/ x86-isms).
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29042
Overview:
This is the first stage of a RDMA stack upgrade introducing kernel
changes only based on Linux 5.7-rc1.
This patch is based on about four main areas of work:
- Update of the IB uobjects system:
- The memory holding so-called AH, CQ, PD, SRQ and UCONTEXT objects
is now managed by ibcore. This also require some changes in the
kernel verbs API. The updated verbs changes are typically about
initialize and deinitialize objects, and remove allocation and
free of memory.
- Update of the uverbs IOCTL framework:
- The parsing and handling of user-space commands has been
completely refactored to integrate with the updated IB uobjects
system.
- Various changes and updates to the generic uverbs interfaces in
device drivers including the new uAPI surface.
- The mlx5_ib_devx.c in mlx5ib and related mlx5 core changes.
Dependencies:
- The mlx4ib driver code has been updated with the minimum changes
needed.
- The mlx5ib driver code has been updated with the minimum changes
needed including DV support.
Compatibility:
- All user-space facing APIs are backwards compatible after this
change.
- All kernel-space facing RDMA APIs are backwards compatible after
this change, with exception of ib_create_ah() and ib_destroy_ah()
which takes a new flag.
- The "ib_device_ops" structure exist, but only contains the driver ID
and some structure sizes.
Differences from Linux:
- Infiniband drivers must use the INIT_IB_DEVICE_OPS() macro to set
the sizes needed for allocating various IB objects, when adding
IB device instances.
Security:
- PRIV_NET_RAW is needed to use raw ethernet transmit features.
- PRIV_DRIVER is needed to use other privileged operations.
Based on upstream Linux, Torvalds (5.7-rc1):
8632e9b5645bbc2331d21d892b0d6961c1a08429
MFC after: 1 week
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31149
Sponsored by: NVIDIA Networking
We failed to list the new pf_syncookies.c file in sys/conf/files. This
worked for the usual configurations, where pf is a module, but not for
LINT builds.
Reported by: lwhsu
MFC after: 1 week
Sponsored by: Modirum MDPay
The bcmp symbol is not used, at the same time memcmp as pulled from
libkern does byte-by-byte comparison.
So happens bcmp as found in support.S is in fact renamed memcmp, rename
it back.
Discussed with: cognet
Sponsored by: Rubicon Communications, LLC ("Netgate")
Some downstream configurations do not store secrets in the
early (loader/static) environments and desire a way to preserve these
for diagnostic reasons. Provide an option to do so.
Reviewed by: imp, jhb (earlier version)
Differential Revision: https://reviews.freebsd.org/D30834
Changes since 1.25.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.14.0.4 for Linux" dated
2021-07-08.
Fixes
-----
BASE:
- Wait 5ms before and after the i2c command that clears the mod_select.
This fixes incorrect port module type read from i2c.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
This controller supports 2.5G/1G/100MB/10MB speeds, and allows
tx/rx checksum offload, TSO, LRO, and multi-queue operation.
The driver was derived from code contributed by Intel, and modified
by Netgate to fit into the iflib framework.
Thanks to Mike Karels for testing and feedback on the driver.
Reviewed by: bcr (manpages), kbowling, scottl, erj
MFC after: 1 month
Relnotes: yes
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30668
Rather than extending syr827 for syr828 (as initially done in D31103)
switch to the Fairchild Semiconductor Corporation fan53555 implementation
which is in-tree but was not attached to the build. The fan53555
implementation also supports syr827/syr8278 already. [1]
Update NOTES and the arm64 GENERIC configuration for the switch.
syr827 for now stays in the tree but is not used by any
kernel configuration.
Suggested by: mmel [1]
Reviewed by: mmel, manu
Differential Revision: https://reviews.freebsd.org/D31112
The r intc interrupt controller seems to do a lot of things :
- It can handle the NMI interrupt
- It have local interrupts for some device that also can be muxed with GIC
- It can serve as an forwarder for the GIC
It's mostly used for deepsleep/wakeup if I understood correctly and we do not
support this on arm64.
For now just forward everything to the GIC so interrupts works again for device
which now have this interrupts controller set since dts v5.12
Sponsored by: Diablotin Systems
This version is intended to be used with the 0.29.4 version of the
ice(4) driver, which will be be committed afterwards.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: stallamr_netapp.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D30887
Implement support for the NXP LS1028A SoC MDIO controller.
It is attached to the internal PCI root complex.
The controller is used to communicate with PHYs of ports connected
to the internal switch.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30731
ENETC it a gigabit Ethernet controller found on the LS1028A board.
It supports basic VLAN offloads - tag extraction, injection and hardware
filtering. Inband MDIO connectivity is used for link status
monitoring through the miibus interface. Fixed-link mode is also
supported, which allows for operation of internal cpu to switch port.
Since no admin interrupts are present in hardware, link status polling
has to be used.
Due to a hardware bug software reset of the NIC results in a external
abort. Because of that most of the hardware initialization is done
during attach. This also means that in the case of an fatal error full
board reset is required.
The enetc_hw.h header was imporoted from Linux. It is dual licensed.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30729
Stop confusing people, retire COMPAT_LINUX and COMPAT_LINUX32 kernel
build options. Since we have 32 and 64 bit Linux emulators, we can't build both
emulators together into the kernel. I don't think it matters, Linux emulation
depends on loadable modules (via rc).
Cut LINPROCFS and LINSYSFS for consistency.
PR: 215061
Reviewed by: bcr (manpages), trasz
Differential Revision: https://reviews.freebsd.org/D30751
MFC after: 2 weeks
jhb@ pointed out an extra plural in this phrase and a gramatical error,
so reword a little to be less awkward to fix both issues.
Sponsored by: Netflix
