Driver support is only provided for ConnectX4/5.
System-time timestamp is calculated based on the free-running counter
timestamp provided by hardware. Driver periodically samples the
counter to calibrate it against the system clock and uses linear
interpolation to convert. Stability of the crystal which drives the
clock is +-50 ppm at the operational temperature, which makes the
algorithm good enough.
The calculation is somewhat delicate because all values are 64bit and
overflow the naive formula for linear interpolation. The calculation
drops the least significant bits in advance, see the PREC shift in
mlx5_mbuf_tstmp().
Hardware stamps can be turned off by 'ifconfig mceN -hwrxtsmp'. Buggy
firmware might result in small but visible errors in the reported
timestamps, detectable e.g. by nonsensical (negative) RTT values for
LAN pings.
Reviewed by: gallatin, hselasky
Sponsored by: Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D12638
Different compilers may optimise the enum type in different ways. This ensures
coherency when range checking the value of enums in ibcore.
Sponsored by: Mellanox Technologies
MFC after: 1 week
The hardware is capable of 2 requestor endianness modes for standard 8
byte atomics: BE (0x0) and host endianness (0x1). Read the supported
modes from hca atomic capabilities and configure HW to host endianness
mode if supported.
Sponsored by: Mellanox Technologies
MFC after: 1 week
the coming ibcore and mlx5ib updates in order to support traffic redirection
to so-called raw ethernet QPs.
Remove unused E-switch related routines and files while at it.
Sponsored by: Mellanox Technologies
MFC after: 1 week
iWarp and RoCE in ibcore. The selection of RDMA_PS_TCP can not be used
to indicate iWarp protocol use. Backport the proper IB device
capabilities from Linux upstream to distinguish between iWarp and
RoCE. Only allocate the additional socket required for iWarp for RDMA
IDs when at least one iWarp device present. This resolves
interopability issues between iWarp and RoCE in ibcore
Reviewed by: np @
Differential Revision: https://reviews.freebsd.org/D12563
Sponsored by: Mellanox Technologies
MFC after: 3 days
Remote DMA over Converged Ethernet, RoCE, for the ConnectX-4 series of
PCI express network cards.
There is currently no user-space support and this driver only supports
kernel side non-routable RoCE V1. The krping kernel module can be used
to test this driver. Full user-space support including RoCE V2 will be
added as part of the ongoing upgrade to ibcore from Linux 4.9. Otherwise
this driver is feature equivalent to mlx4ib(4). The mlx5ib(4) kernel
module will only be built when WITH_OFED=YES is specified.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
input errors in the mlx5en(4) driver. This improves the sysadmin view of
physical port errors.
Submitted by: gallatin@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Code inspection reveals the busdma unload and free functions
do not write to the belonging dma tag and does not need to be
serialized. This allows mlx5_fwp_free() to be called from
software interrupt context.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Add io_mapping_init_wc() and add a third (unused) parameter to
io_mapping_map_wc().
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11286
The MLX5 driver has four different types of DMA allocations which are
now allocated using busdma:
1) The 4K firmware DMA-able blocks. One busdma object per 4K allocation.
2) Data for firmware commands use the 4K firmware blocks split into four 1K blocks.
3) The 4K firmware blocks are also used for doorbell pages.
4) The RQ-, SQ- and CQ- DMA rings. One busdma object per allocation.
After this patch the mlx5en driver can be used with DMAR enabled in
the FreeBSD kernel.
MFC after: 1 week
Sponsored by: Mellanox Technologies
- When device disappears from PCI indicate error device state and:
1) Trigger command completion for all pending commands
2) Prevent new commands from executing and return:
- success for modify and remove/cleanup commands
- failure for create/query commands
3) When reclaiming pages for a device in error state don't ask FW to
return all given pages, just release the allocated memory
MFC after: 1 week
Sponsored by: Mellanox Technologies
PCI device(s), changes:
- alloc_entry() now clears bit for page slot entry aswell
- update of cmd->ent_arr[] is now under cmd->alloc_lock
- complete command if alloc_entry() fails
MFC after: 1 week
Sponsored by: Mellanox Technologies
By default reading the diagnostic counters is disabled. The firmware
decides which counters are supported and only those supported show up
in the dev.mce.X.diagnostics sysctl tree.
To enable reading of diagnostic counters set one or more of the
following sysctls to one:
dev.mce.X.conf.diag_general_enable=1
dev.mce.X.conf.diag_pci_enable=1
MFC after: 1 week
Sponsored by: Mellanox Technologies
consistent return values from the mlx5e_sq_has_room_for()
function. The two counters are incremented by different threads under
different locks.
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Add new sysctl node to control the transmit packet bufring.
- Add optimised version of the transmit routine which output packets
directly to the DMA ring instead of using bufring in case the transmit
lock is congested. This can reduce the number of taskswitches which in
turn influence the overall system CPU usage, depending on the
workload.
- Add " TX" suffix to debug name for transmit mutexes to silence some
witness warnings about aquiring duplicate locks having same name.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Suggested by: gallatin @
Add own state variable to track if a sendqueue is stopped or not.
This will prevent traffic from entering the sendqueue while it is
being destroyed.
Update drain function to wait for traffic to be transmitted before
returning when the link state is active.
Add extra checks in transmit path for stopped SQ's.
While at it:
- Use likely() for a mbuf pointer check.
- Remove redundant IFF_DRV_RUNNING check.
MFC after: 1 week
Sponsored by: Mellanox Technologies
