Commit Graph

519 Commits

Author SHA1 Message Date
Yaroslav Tykhiy
63518eccca Introduce a new toy interface, edsc(4). It's a discard interface
imitating an Ethernet device, so vlan(4) and if_bridge(4) can be
attached to it for testing and benchmarking purposes.  Its source
can be an introduction to the anatomy of a network interface driver
due to its simplicity as well as to a bunch of comments in it.
2007-03-26 04:39:18 +00:00
Jung-uk Kim
2be4e4713a Catch up with ACPI-CA 20070320 import. 2007-03-22 18:16:43 +00:00
Kip Macy
0b7f21b283 add cxgb to modules Makefile 2007-03-14 02:47:58 +00:00
Florent Thoumie
7bd6fde395 - Add Intel firmwares for Intel PRO/Wireless LAN 2100/2200/2915 cards in a
uuencoded format along with their respective LICENSE files.
- Add new share/doc/legal directory to BSD.usr.dist mtree file. This is the
place we install LICENSE files for restricted firmwares.
- Teach firmware(9) and kmod.mk about licensed firmwares. Restricted firmwares
won't load properly unless legal.<name>.license_ack is set to 1, either
via kenv(1) or /boot/loader.conf.

Reviewed by:	mlaier, sam
Permitted by:	Intel (via Andrew Wilson)
MFC after:	1 month
2007-03-02 11:42:56 +00:00
Sam Leffler
3d14f9377c ath and ath_rate_sample now have a compile-time dependency on the hal
so we need to build them only on architectures where there's a released
hal; this hack can be eliminated when an ia64 hal build is present
2007-01-28 18:35:46 +00:00
Takanori Watanabe
747e146437 Remove stall comment.
Pointed out by:Ed Maste.
2006-12-18 18:57:41 +00:00
Takanori Watanabe
7b7b6f4497 Oops, I forget to add amd64 as ACPI arch. 2006-12-18 14:38:31 +00:00
Pyun YongHyeon
c9d21ce905 Hook up msk(4) to the build. 2006-12-13 02:37:48 +00:00
Alexander Leidinger
f195f6a161 Add the linux module to the amd64 build, all symbols can now be resolved. 2006-12-02 13:58:13 +00:00
Sam Leffler
74828f25db device-independent implementation of AMRR tx rate control algorithm
Obtained from:	openbsd (w/ mods)
MFC after:	1 month
2006-11-26 19:55:26 +00:00
Maxim Konovalov
9aab0d96da o Add uark(4), a driver for Arkmicro Technologies ARK3116 based serial
adapters.

Submitted by:	Alex Rodin
Obtained from:	OpenBSD
Reviewed by:	-usb
MFC after:	6 weeks
2006-11-15 09:13:25 +00:00
Tom Rhodes
5416cda829 Re-enable module build for POSIX semaphores.
Update the manual page describe loading the sem module.

Approved by:	silence on -arch and -standards
2006-11-11 16:49:29 +00:00
Alexander Leidinger
20a2cc13b7 Build linprocfs and linsysfs as modules on amd64.
Sponsored by:	Google SoC 2006
Submitted by:	rdivacky
2006-09-09 16:58:22 +00:00
Ruslan Ermilov
2054a074c1 MF6: Attach if_bce.ko to the build.
Noticed by:	davidch
2006-09-08 15:40:36 +00:00
Christian Brueffer
d4dc7a5cef Don't build iwi(4) on amd64, there are problems with the firmware modules.
Reported by:	sam
Approved by:	rwatson (mentor)
MFC after:	3 days
2006-09-01 11:27:22 +00:00
Christian Brueffer
820130bfee Follow the lead of mxgb(4) and build the module for ixgb(4).
Originally it wasn't enabled since the hardware wasn't commonplace,
but as 10GE hardware is becoming more widely used, building the module
by default should be beneficial.

Approved by:	rwatson (mentor)
MFC after:	2 weeks
2006-08-18 10:20:15 +00:00
Maxim Sobolev
e5d34218fb Add device to access and modify Open Firmware NVRAM settings in
PowerPC-based Apple's machines and small utility to do it from
userland modelled after the similar utility in Darwin/OSX.

Only tested on 1.25GHz G4 Mac Mini.

MFC after:	1 month
2006-08-01 22:19:01 +00:00
Marcel Moolenaar
73b93591e7 Remove Alpha remnants. 2006-07-27 19:12:49 +00:00
Andrew Thompson
8a33eee1ec Hook bridgestp up to the build. 2006-07-26 22:10:10 +00:00
Pyun YongHyeon
d497bdf1da Hook up stge(4) to the build. 2006-07-25 00:45:55 +00:00
David E. O'Brien
bfc788c283 Add a pure open source nForce Ethernet driver, under BSDL.
This driver was ported from OpenBSD by Shigeaki Tagashira
<shigeaki@se.hiroshima-u.ac.jp> and posted at
http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html
It was additionally cleaned up by me.
It is still a work-in-progress and thus is purposefully not in GENERIC.
And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
Marcel Moolenaar
c69e06b14f Unconditionally enable ppc(4) and puc(4). 2006-06-18 05:05:46 +00:00
Yoshihiro Takahashi
e4251b042e Build the ppc module on pc98. 2006-06-16 12:51:53 +00:00
Konstantin Belousov
93ad18ec7f Allow for ppc(4) to be built as module, initially
only for i386 and amd64.

MFC after:	1 month
Approved by:	pjd (mentor)
2006-06-16 11:44:55 +00:00
Andrew Gallatin
6d87a65da4 - Complete the myri10ge -> mxge name change by doing a mechanical
s/myri10ge/mxge/g replacement in the myri10ge files.  A few contuation
  lines were joined because of the regained columns.
- Hook the mxge driver back to the build.
2006-06-13 13:53:52 +00:00
Sam Leffler
bea55cebda enable build of ath_hal on sparc64 and powerpc
MFC after:	1 month
2006-06-08 23:35:58 +00:00
Warner Losh
a296dc3e60 wi works on amd64 laptops. Enable its building as a module. 2006-05-26 03:45:29 +00:00
Warner Losh
03d9e830c1 Add cbb, cardbus, pccard and exca to the list of modules. The appear
to work on the Turion64 laptop I have.
2006-05-24 16:26:29 +00:00
Xin LI
508c6d349a Fix build (unhook lnc).
Submitted by:	David H. Wolfskill <david catwhisker org>
2006-05-14 18:31:34 +00:00
Max Laier
656faadcb8 Remove ip6fw. Since ipfw has full functional IPv6 support now and - in
contrast to ip6fw - is properly lockes, it is time to retire ip6fw.
2006-05-12 20:39:23 +00:00
Doug Ambrisko
32397ce071 Add in linsysfs. A linux 2.6 like sys filesystem to pacify the Linux
LSI MegaRAID SAS utility.

Sponsored by:		IronPort Systems
Man page help from:	brueffer
2006-05-09 22:27:01 +00:00
Alexander Leidinger
4577652f10 It seems I forgot to commit the removal of the linux and linprocfs
modules at the time I axed the linuxolator on Alpha.

Noticed by:	kris
2006-05-09 20:33:59 +00:00
Scott Long
27aafcda76 Enable the rr232x driver for amd64. 2006-04-28 05:23:10 +00:00
Scott Long
9bcb275009 Add the 'rr232x' driver for the HighPoint RocketRAID 2320 series of cards.
This driver was generously developed and donated by Highpoint.

It is enabled for i386 only at the moment.  I will enable it for amd64
shortly.

Obtained from: HighPoint Technologies, Inc.
2006-04-27 20:22:46 +00:00
Marcel Moolenaar
c9e0c5b9c4 Build uart(4) on PowerPC. 2006-03-31 01:50:23 +00:00
Marcel Moolenaar
af2e25a6d2 o Add scc(4) to the build.
o  Add the scc(4) manpage to the build.
o  Update the uart(4) manpage to account for scc(4).
o  Update the uart(4) module build to include support for scc(4).
2006-03-30 18:39:24 +00:00
Scott Long
7f631a410c Hook the MFI driver up to the build. 2006-03-29 09:57:22 +00:00
Ruslan Ermilov
cea557add0 Extend coverage of the MK_IPX build option to the following:
- <netipx> headers [1]
- IPX library (libipx)
- IPX support in ifconfig(8)
- IPXrouted(8)
- new MK_NCP option

New MK_NCP build option controls:

- <netncp> and <fs/nwfs> headers
- NCP library (libncp)
- ncplist(1) and ncplogin(1)
- mount_nwfs(8)
- ncp and nwfs kernel modules

User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP.

[1] <netsmb/netbios.h> unconditionally uses <netipx> headers
so they are still installed.  This needs to be dealt with.
2006-03-20 14:24:58 +00:00
Ruslan Ermilov
e1fe3dba5c Reimplementation of world/kernel build options. For details, see:
http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html

The src.conf(5) manpage is to follow in a few days.

Brought to you by:	imp, jhb, kris, phk, ru (all bugs are mine)
2006-03-17 18:54:44 +00:00
Yoshihiro Takahashi
f28f001e8d Don't build the ipw and iwi on pc98. 2006-03-17 13:06:19 +00:00
Damien Bergamini
b4c31113a1 build ipw(4) and iwi(4) modules on i386 and amd64 only. 2006-03-15 20:58:44 +00:00
Yaroslav Tykhiy
375ce6798f Take the functionality contained in the former "options TDFX_LINUX"
into a separate module.  Accordingly, convert the option into a device
named similarly.

Note for MFC: Perhaps the option should stay in RELENG_6 for POLA reasons.

Suggested by:	scottl
Reviewed by:	cokane
MFC after:	5 days
2006-03-03 21:37:38 +00:00
Wojciech A. Koszek
cf62a08f65 Connect zlib to the build.
Approved by:	cognet (mentor)
2006-02-27 16:50:51 +00:00
Andrew Gallatin
784daffb89 Unhook myri10ge from build in preparation for rename 2006-02-23 12:30:39 +00:00
Yoshihiro Takahashi
58d89e5cef Disable the myri10ge driver on pc98. 2006-02-20 12:05:52 +00:00
Andrew Gallatin
2790e25d62 Hook the myri10ge driver to the i386 and amd64 module builds.
Sponsored by: Myricom Inc.
Reviewed by: scottl
2006-02-20 02:50:09 +00:00
Yoshihiro Takahashi
42a64e5369 Disable the ipmi driver on pc98. 2006-02-14 12:55:07 +00:00
Doug Ambrisko
1c204a5731 Tie the ipmi driver into the i386/amd64 builds. 2006-02-13 17:56:24 +00:00
Warner Losh
d87076c835 an driver not endian clean, so don't enable on sparc64 2006-02-05 17:38:28 +00:00
Max Laier
5bba2114d0 Make pflog a seperate module. As a result pflog_packet() becomes a function
pointer that is declared in pf_ioctl.c

Requested by:	yar (as part of the module build reorg)
MFC after:	1 week
X-MFC with:	yar's module reorg
2006-02-05 17:17:32 +00:00