Commit Graph

48 Commits

Author SHA1 Message Date
Scott Long
2ae078a31d Follow-up r283636 with a fix to the other abuses of BUS_SPACE_MAXSIZE_32BIT.
It makes no sense to specify a segment size that's larger than the total
amount that you want to allocate.
2015-05-28 08:00:11 +00:00
Gleb Smirnoff
c803f24b28 To avoid sleeping in firmware_get() with bwi mutex held, call
bwi_mac_fw_alloc() at the device attach, not in the interface
init.
2015-05-27 22:30:21 +00:00
Gleb Smirnoff
15692978d7 In bwi_mac_fw_alloc():
- Use device_printf() instead of if_printf().
- Reduce cut and paste.
2015-05-27 22:29:19 +00:00
Gleb Smirnoff
46a8b17df3 Setup the interrupt handler after bwi_attach(). If IRQ is shared, interrupt
may come during bwi_attach().
2015-05-27 22:27:15 +00:00
Gleb Smirnoff
515b3730c6 - Don't request BUS_DMA_ALLOCNOW for dma tags, that requires enormous
amount of memory.
- Don't request segsize of BUS_SPACE_MAXSIZE_32BIT, when maxsize is
  MCLBYTES.

With this change bwi_attach() can succeed on i386.

Submitted by:	scottl
2015-05-27 22:25:49 +00:00
Gleb Smirnoff
272f6ade9b Change three methods in struct ieee80211com, namely ic_updateslot,
ic_update_mcast and ic_update_promisc, to pass pointer to the ieee80211com,
not to the ifnet.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 19:53:29 +00:00
Gleb Smirnoff
59686fe935 Set ic_softc in all 802.11 drivers. Not required right now, but will be
used quite soon.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 18:50:26 +00:00
Gleb Smirnoff
c8550c0278 Make net80211 drivers supply their device name to the net80211 layer, so
that the latter doesn't need to go through struct ifnet to get their name.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 13:51:13 +00:00
Alexander Motin
6f954fb36b Remove MAXBSIZE use from drivers where it has nothing to do.
In some cases limits are just not needed, in others -- DFLTPHYS is the
right constant to use instead.

MFC after:	1 month
2015-03-22 16:10:28 +00:00
Gleb Smirnoff
c8dfaf382f Mechanically convert to if_inc_counter(). 2014-09-19 03:51:26 +00:00
Kevin Lo
5945b5f5ab Rename definition of IEEE80211_FC1_WEP to IEEE80211_FC1_PROTECTED.
The origin of WEP comes from IEEE Std 802.11-1997 where it defines
whether the frame body of MAC frame has been encrypted using WEP
algorithm or not.
IEEE Std. 802.11-2007 changes WEP to Protected Frame, indicates
whether the frame is protected by a cryptographic encapsulation
algorithm.

Reviewed by:	adrian, rpaulo
2014-01-08 08:06:56 +00:00
Gleb Smirnoff
c3322cb91c Include necessary headers that now are available due to pollution
via if_var.h.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-28 07:29:16 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Adrian Chadd
a1df5ac10a ieee80211_rate2plcp() and ieee80211_rate2phytype() are both pre-11n
routines and thus assert if one passes in a rate code with the
high bit set.

Since the high bit can indicate either IEEE80211_RATE_BASIC or
IEEE80211_RATE_MCS, it's up to the caller to determine whether
the rate is 11n or not, and either mask out the BASIC bit, or
call a different function.

(Yes, this does mean that net80211 should grow 11n-aware rate2phytype()
and rate2plcp() functions..)

This may need to happen for the other drivers - it's currently only
done (now) for iwn(4) and bwi(4).

PR:		kern/181100
2013-08-13 09:58:27 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Adrian Chadd
60807f5b81 Add opt_wlan.h includes, so IEEE80211_* configuration changes are
correctly picked up.

Noticed by:	Justin Hibbits, whilst debugging @ BSDCan
2012-05-12 15:11:53 +00:00
Bernhard Schmidt
fcd9500f91 Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
  compiler warnings

Submitted by:	arundel@
2011-12-17 10:23:17 +00:00
Adrian Chadd
3c5ebcdc1d Fix an incorrect use of sizeof().
Obtained from:	OpenBSD sys/dev/ic/bwi.c r1.87
2011-10-10 02:54:58 +00:00
Adrian Chadd
e008215028 Update from OpenBSD: Include 0x4402 in the bbp id mapping table used on older devices.
http://bcm-specs.sipsolutions.net/BackPlane agrees.

Obtained from:	OpenBSD, sys/dev/ic/bwi.c r1.88
2011-10-10 02:49:21 +00:00
Adrian Chadd
79c27adfd5 Fix an unaligned access issue; tidy up OFDM/DS rate decoding from the PLCP.
This fixes a panic on PPC.

Submitted by:	novel
Obtained from:	OpenBSD, sys/dev/ic/bwi.c r1.89
2011-10-03 16:30:18 +00:00
Bernhard Schmidt
bd56e71b4b Pull ieee80211_ratectl_node_init() calls from drivers into net80211.
This fixes hostap mode for at least ral(4) and run(4), because there is
no sufficient call into drivers which could be used initialize the node
related ratectl variables.

MFC after:	3 days
2011-01-17 20:15:15 +00:00
Matthew D Fleming
6dc7dc9a3e sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
Commit the rest of the devices.
2011-01-12 19:53:56 +00:00
Bernhard Schmidt
a7c6aabdc3 Instead of using the AMRR ratectl algo as default for drivers which have
the IEEE80211_C_RATECTL flag set, default to NONE for all drivers. Only if
a driver calls ieee80211_ratectl_init() check if the NONE algo is still
selected and try to use AMRR in that case. Drivers are still free to use
any other algo by calling ieee80211_ratectl_set() prior to the
ieee80211_ratectl_init() call.

After this change it is now safe to assume that a ratectl algo is always
available and selected, which renders the IEEE80211_C_RATECTL flag pretty
much useless. Therefore revert r211314 and 211546.

Reviewed by:	rpaulo
MFC after:	2 weeks
2010-11-06 18:17:20 +00:00
Bernhard Schmidt
ad8e331bf2 Introduce IEEE80211_C_RATECTL, drivers which use the ratectl framework
should set this capability.

MFC after:	2 weeks
2010-08-14 20:12:10 +00:00
Weongyo Jeong
e7c6c10e16 Fixes a page fault in bwi_pci_probe() because the array isn't terminated
with NULL.

PR:		kern/148473
Submitted by:	Grzegorz Dabrowski <grzegorz.dabrowski at gmail dot com>
MFC after:	1 week
2010-07-10 22:37:23 +00:00
Weongyo Jeong
03286b3576 Initializes the ratectl for a node when the state is changed to RUN.
This prevents a kernel fault by dividing with zero because the initial
rate was 0 and didn't be initialized.

Tested by:	Warren Block <wblock at wonkity.com>
MFC after:	3 days
2010-06-29 21:56:42 +00:00
Weongyo Jeong
68cd814a8a Fixes NULL pointer reference that it's occurred when the state is
changed to RUN because ic->ic_newassoc isn't set anywhere now.  In the
previous bwi_newassoc() is used to initialize AMRR rate routines.

Tested by:	Warren Block <wblock at wonkity.com>
MFC after:	3 days
2010-06-29 21:52:40 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
Rui Paulo
4a67d9e8b1 Avoid NULL deref.
Submitted by:	gavin
MFC after:	1 month
2010-04-07 17:49:47 +00:00
Rui Paulo
b6108616ac net80211 rate control framework (net80211 ratectl).
This framework allows drivers to abstract the rate control algorithm and
just feed the framework with the usable parameters. The rate control
framework will now deal with passing the parameters to the selected
algorithm. Right now we have AMRR (the default) and RSSADAPT but there's
no way to select one with ifconfig, yet.
The objective is to have more rate control algorithms in the net80211
stack so all drivers[0] can use it. Ideally, we'll have the well-known
sample rate control algorithm in the net80211 at some point so all
drivers can use it (not just ath).

[0] all drivers that do rate control in software, that is.

Reviewed by:	bschmidt, thompsa, weyongo
MFC after:	1 months
2010-04-07 15:29:13 +00:00
John Baldwin
f140aad88c More consistent whitespace. 2009-11-11 20:29:40 +00:00
John Baldwin
58fbe5ab67 Use a dedicated callout to drive the transmit watchdog timer instead of
using if_watchdog and if_timer.

Tested by:	gavin
2009-11-11 20:27:53 +00:00
Warner Losh
37c3e5226c In bwi_newstate, only zero the bssid when we stop a STA. And only
when we've not stopped the card.  It hangs the system when we touch
the CSR after bwistop.

This fixes the hanging on kldunload.
2009-06-02 16:48:10 +00:00
Warner Losh
07db17ce56 Move the unlock to after the ifdef (maybe the right fix is to remove
the ifdef) since it calls bwi_start_locked, which expects to the lock
to be held...
2009-06-01 16:29:03 +00:00
Warner Losh
7389f7db05 Make sure that we drain the LED blinking callout on detach.
Submitted by:	Paul B. Mahol
2009-06-01 16:27:13 +00:00
Warner Losh
1771d2075a Add a comment about what may be happening when we get certain
messages.  No change to actual code.
2009-06-01 16:22:01 +00:00
Sam Leffler
c5f5009be6 fix typo 2009-05-30 01:33:05 +00:00
Sam Leffler
515db61d2b validate tx rate(s) in the raw xmit path
Tested by:	"Paul B. Mahol" <onemda@gmail.com> (rum, bwi)
2009-05-29 23:41:31 +00:00
Sam Leffler
5463c4a485 Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
  and remove explicit bpf support from wireless drivers; drivers now
  use ieee80211_radiotap_attach to setup shared data structures that
  hold the radiotap header for each packet tx/rx
o remove rx timestamp from the rx path; it was used only by the tdma support
  for debugging and was mostly useless due to it being 32-bits and mostly
  unavailable
o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and
  per-com state when there are active taps
o track the number of monitor mode vaps
o use bpf tap and monitor mode vap state to decide when to collect radiotap
  state and dispatch frames; drivers no longer explicitly directly check
  bpf state or use bpf calls to tap frames
o handle radiotap state updates on channel change in net80211; drivers
  should not do this (unless they bypass net80211 which is almost always
  a mistake)
o update various drivers to be more consistent/correct in handling radiotap
o update ral to include TSF in radiotap'd frames
o add promisc mode callback to wi

Reviewed by:	cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
Warner Losh
f4fcd5ddec Remove unnecessary comments. 11A read/write is the same: its just the
classic indirect register dance.

Submitted by:	ddkprog at yahoo not com
2009-05-18 15:46:34 +00:00
Warner Losh
b16a8a5859 Fix a typo from the original driver. We need to write ctrl2 into RF
register 0x52, not ctrl1.  This appears to be a mistake in the bcm
reverse engineering page, and has been corrected there.  Tracing
through the code, this is more in keeping with the "documented"
register. Sephe thinks it looks interesting and may be worth
fixing. :)

Submitted by:	ddkprog at yahoo com
Reviewed by:	Sepherosa Ziehau
2009-05-18 15:31:26 +00:00
Warner Losh
e9902ec0a6 Correct types of PHY, per http://bcm-specs.sipsolutions.net/PHYVersioning
# Note: The driver doesn't support either these PHY types, so this is
# effectively a nop.

Submitted by:	"ddk"
Obtained from:	http://paradox.lissyara.su/bwi.diff
2009-05-18 01:07:38 +00:00
Warner Losh
e9d57f2fd1 Turns out that my BCM4318 has a PCI ID of 0x4319, which lead me to
believe it was a BCM4319.  However, it is the a/b/g variation of the
BCM4318.  The chip itself is labelled BCM4318EKFBG, and the board is
BCM94318MKABG.

Paradox's patch includes the type of 802.11 wireless for each card,
but changes all the names (I don't think the latter is quite right).
Import that part of the patch, but keep the current set of BCM names
(with a minor tweak for the 4306 ones). I'll need to verify them via
some other means.

Obtained from:	http://paradox.lissyara.su/bwi.diff (partially)
2009-05-18 01:00:11 +00:00
Warner Losh
16dcc9ce77 Cleanup module declarations:
Use "bwi" consistently
	No need to have separate cardbus attachment
	No need to declare a module version
2009-05-15 16:38:42 +00:00
Nathan Whitehorn
8553eea5ce Add a comment to motivate my last change.
Suggested by:	sam, imp
2009-05-13 16:19:05 +00:00
Nathan Whitehorn
0a594d9ecc Add a short delay after programming PHY registers to give some time for
the engine to catch up. This prevents a machine check exception from
illegal memory requests with a BCM4318.
2009-05-13 14:25:55 +00:00
Warner Losh
d83d76df1f Update a few XXX comments
Submitted by:	ddk ddk ddkprog at yahoo dot com
2009-05-11 17:13:52 +00:00
Warner Losh
12e36acb09 Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets.  This driver uses the v3 firmware that
needs to be fetched separately.  A port will be committed to create
the bwi firmware module.

The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319

The driver works for 802.11b and 802.11g.

Limitations:
	This doesn't support the 802.11a or 802.11n portion of radios.
	Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
	Documenation for this firmware is reverse engineered from
		 http://bcm.sipsolutions.net/
	V4 of the firmware is needed for 11a or 11n support
		 http://bcm-v4.sipsolutions.net/
	Firmware needs to be fetched from a third party, port to be committed

# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.

Obtained from:	DragonFlyBSD, //depot/projects/vap
Reviewed by:	sam@, thompsa@
2009-05-03 04:01:43 +00:00