options, so move their processing there. This fixes issues with
Makefiles that define NO_MAN=t and only inlcude bsd.*.mk files. A few
ports fell into this category, and they should be fixed by this change.
Also, for now, disable the warning about NO_foo being deprecated. More
work is needed than anticipated before we can do that, so kill the
noise for now.
_rtld_debug_postinit(). [1]
- Use __compiler_membar() instead of inline asm in _r_debug_state() and
_r_debug_postinit(). [2]
Pointy hat to: markj [1]
Reported by: attilio [2]
Discussed with: kib
X-MFC-With: r265456
cards. LSI has been maintaining this driver outside of the FreeBSD
tree. It overlaps support of ThunderBolt and Invader cards that mfi(4)
supports. By default mfi(4) will attach to cards. If the tunable:
hw.mfi.mrsas_enable=1
is set then mfi(4) will not probe and attach to these newer cards and
allow mrsas(4) to attach. So by default this driver will not effect
a FreeBSD system unless mfi(4) is removed from the kernel or the
tunable is enabled.
mrsas(4) attaches disks to the CAM layer so it depends on CAM and devices
show up as /dev/daX. mfiutil(8) does not work with mrsas. The FreeBSD
version of MegaCli and StorCli from LSI do work with mrsas. It appears
that StorCli only works with mrsas. MegaCli appears to work with mfi(4)
and mrsas(4).
It would be good to add mfiutil(4) support to mrsas, emulations modes,
kernel logging, device aliases to ease the transition between mfi(4)
and mrsas(4).
Style issues should be resolved by LSI when they get committers approved.
The plan is get this driver in FreeBSD 9.3 to improve HW support.
Thanks to LSI for developing, testing and working with FreeBSD to
make this driver co-exist in FreeBSD. This improves the overall
support of MegaRAID SAS.
Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com>
Reviewed by: scottl
MFC after: 3 days
Sponsored by: LSI
allowed range or when one or more pages are not mapped. This according to
The Open Group Base Specifications Issue 7.
Discussed with: attilio, Bruce Evans
Reviewed by: alc, Garrett Cooper
Reported by: ATF
MFC after: 2 weeks
Sponsored by: EMC / Isilon storage division
mprsas_SSU_to_SATA_devices().
This fixes an assertion on shutdown with INVARIANTS enabled with SATA
drives present on an IR firmware controller.
Reviewed by: Steve McConnell <stephen.mcconnell@avagotech.com>.
MFC after: 3 days
Implement a new -fstandalone-debug option. rdar://problem/15685848
It controls everything that -flimit-debug-info used to, plus the
vtable type optimization. The old -fno-limit-debug-info option is now an
alias to -fstandalone-debug and vice versa.
Standalone is the default on Darwin until dtrace is updated to work with
non-standalone debug info (rdar://problem/15758808).
Note: I kept the LimitedDebugInfo name in CodeGenOptions::DebugInfoKind
because NoStandaloneDebugInfo sounded even more confusing.
of C1.
This may not stay through 11.0-RELEASE, but at least having it
on by default in -HEAD will expose (more) issues with broken hardware.
Note: I have no plans or desire to MFC this to stable/10.
gettimeofday returns the system clock, which may jump forward or back,
especially if NTP is in use. If the time jumps backwards, then dd will see
negative elapsed time, round it up to 1usec, and print an absurdly fast
transfer rate.
The solution is to use clock_gettime(2) with CLOCK_MONOTONIC_PRECISE as the
clock_id. That clock advances steadily, regardless of changes to the system
clock.
Reviewed by: delphij
MFC after: 3 days
Sponsored by: Spectra Logic
sector granularity for both offset and length. Have all schemes
use mkimg_write() instead of mkimg_seek() followed by write(2).
Now that schemes don't use lseek(2) nor write(2) directly, it's
easier to support output formats other than raw disks.
file are always built the same.
(Note that Header and Localstuff must appear first and in that order, the
sorting does not affect as a coincident effect).
Submitted by: sjg
MFC after: 3 days
a journal block even when there are no journal entries to be written.
Until the root cause is found, handle this case by ensuring that a
valid journal segment is always written.
Second, the data buffer used for writing journal entries was never
being scrubbed of old data. Fix this.
Submitted by: Takehara Mikihito
Obtained from: Netflix, Inc.
MFC after: 3 days
4730 metaslab group taskq should be destroyed in metaslab_group_destroy()
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Original author: George Wilson
MFC after: 3 days
the victim process before its entry point is called, at which point probes
and DOF data are registered with the kernel. The r_debug_state hook cannot
be used for this purpose, as it is called before the program's init routines
are invoked and in particular before DOF data is registered (via drti.o).
Reviewed by: kib
MFC after: 2 weeks
- Fix typos preventing -f to actually work with the create command.
- Initialize flags to zero rather than using stack garbage when handling
the grow command.
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
environments (that I can't reproduce locally, but that others have
reported) seem to get tripped up by this man page install. There's
really no need to do it, so turn off the man pages using the most
portable method. We can't just directly set MK_MAN=no here because
we're bootstrapping in the host environment and such a setting was
forbidden until very recently. NO_MAN= can produce a warning, but for
now the warning is benign.
case where the controller is already enabled.
Some of the pl310 configuration registers cannot be changed while the
controller is active, so if there is any platform-specific init to be done
it must happen before enabling the controller.
The controller should not be enabled upon entry to the kernel, but u-boot
has recently developed the bad habit of leaving caches enabled when
launching the kernel, and since we have no control over that source code
we have to do our best to cope with it. The PL310 manual doesn't document
a safe sequence for disabling the controller, but the sequence used here
(force write-through mode and disable linefill allocations, then clean and
invalidate the current contents before disabling the hardware) appears to
be sound both by analysis and empirical testing.
These changes were developed and tested in collaboration with
Svatopluk Kraus <onwahe@gmail.com>.
Reviewed by: cognet@
instead of from /usr/share/mk.
I'm not sure that this will let buildworld complete on a system with
no installed src.opts.mk (make buildworld is still running), but the
tinderbox builds are all failing earlyon without this patch.
controller driver by piggybacking the SOF interrupt when issuing new
and checking old transfers. Number of interrupts was reduced by 30%
when doing Isochronous transfers.
Use correct GINTMSK_XXX macros when accessing the DWC OTG interrupt
mask register.
Add code to adjust the frame interval register which influences the
SOF rate.
MFC after: 2 weeks
This problem only occurs on versions of FreeBSD prior to the recent CAM
locking changes. (i.e. stable/9 and older versions of stable/10) This
change should be a no-op for head and stable/10.
If a path isn't specified, xpt_register_async() will create a fully
wildcarded path and acquire a lock (the XPT lock in older versions,
and via xpt_path_lock() in newer versions) to call xpt_action() for the
XPT_SASYNC_CB CCB. It will then drop the lock and if the requested event
includes AC_FOUND_DEVICE or AC_PATH_REGISTERED, it will get the caller up
to date with any device arrivals or path registrations.
The issue is that before the locking changes, each SIM lock would get
acquired in turn during the EDT tree traversal process. If a path is
specified for xpt_register_async(), it won't acquire and drop its own lock,
but instead expects the caller to hold its own SIM lock. That works for
the first part of xpt_register_async(), but causes a recursive lock
acquisition once the EDT traversal happens and it comes to the SIM in
question. And it isn't possible to call xpt_action() without holding a SIM
lock.
The locking changes fix this by using the XPT topology lock for EDT
traversal, so it is no longer an issue to hold the SIM lock while calling
xpt_register_async().
The solution for FreeBSD versions before the locking changes is to request
notification of all device arrivals (so we pass a NULL path into
xpt_register_async()) and then filter out the arrivals that are not ours.
MFC After: 3 days
Sponsored by: Spectra Logic Corporation
build world, so it is the only make we build or install. fmake is
still in the tree, but disconnected, and upgrades from older systems
that still have bmake has not been removed, but its state has not been
tested (it should work given how minimal the work to upgrade to bmake
is).
/etc/src.conf to this file as well. Now, it will only affect builds of
/usr/src and not others that use the bsd.*.mk files. Specifically
don't install src.opts.mk so we can catch when it 'leaks' into
bsd.*.mk again and have there be errors when this happens. Future
commits will move to including src.opts.mk instead of bsd.own.mk when
all that's needed is one of the MK_FOO options from src.opts.mk.
Future options should be placed here, unless they directly affect a
bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
