available and if that is true make use of them.
Thank you very much to Andrew Turner for providing help and review the patch!
Reviewed by: andrew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10499
7580 ztest failure in dbuf_read_impl
illumos/illumos-gate@1a01181fdc1a01181fdchttps://www.illumos.org/issues/7580
We need to prevent any reader whenever we're about the zero out all the
blkptrs. To do this we need to grab the dn_struct_rwlock as writer in
dbuf_write_children_ready and free_children just prior to calling bzero.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: George Wilson <george.wilson@delphix.com>
- Rename the default implementation of 'pcib_request_feature' and add
a pcib_request_feature() wrapper function (as is often done for
new-bus APIs implemented via kobj) that accepts a single function.
Previously the call to pcib_request_feature() ended up invoking the
method on the great-great-grandparent of the bridge device instead
of the grandparent. For a bridge that was a direct child of pci0 on
x86 this resulted in the method skipping over the Host-PCI bridge
driver and being invoked against nexus0
- When invoking _OSC from a Host-PCI bridge driver, invoke
device_get_softc() against the Host-PCI bridge device instead of the
child bridge that is requesting HotPlug. Using the wrong softc data
resulted in garbage being passed for the ACPI handle causing the
_OSC call to fail.
- While here, perform some other cleanups to _OSC handling in the ACPI
Host-PCI bridge driver:
- Don't invoke _OSC when requesting a control that has already been
granted by the firmware.
- Don't set the first word of the capability array before invoking
_OSC. This word is always set explicitly by acpi_EvaluateOSC()
since it is UUID-independent.
- Don't modify the set of granted controls unless _OSC doesn't exist
(which is treated as always successful), or the _OSC method
doesn't fail.
- Don't require an _OSC status of 0 for success. _OSC always
returns the updated control mask even if it returns a non-zero
status in the first word.
- Whine if _OSC ever tries to revoke a previously-granted control.
(It is not supposed to do that.)
- While here, add constants for the _OSC status word in acpivar.h
(though currently unused).
Reported by: adrian
Reviewed by: imp
MFC after: 1 week
Tested on: Lenovo x220
Differential Revision: https://reviews.freebsd.org/D10520
7606 dmu_objset_find_dp() takes a long time while importing pool
illumos/illumos-gate@7588687e6b7588687e6bhttps://www.illumos.org/issues/7606
When importing a pool with a large number of filesystems within the same
parent filesystem, we see that dmu_objset_find_dp() takes a long time.
It is called from 3 places: spa_check_logs(), spa_ld_claim_log_blocks(),
and spa_load_verify().
There are several ways to improve performance here:
1. We don't really need to do spa_check_logs() or
spa_ld_claim_log_blocks() if the pool was closed cleanly.
2. spa_load_verify() uses dmu_objset_find_dp() to check that no
datasets have too long of names.
3. dmu_objset_find_dp() is slow because it's doing
zap_value_search() (which is O(N sibling datasets)) to determine
the name of each dsl_dir when it's opened. In this case we
actually know the name when we are opening it, so we can provide
it and avoid the lookup.
This change implements fix#3 from the above list; i.e. make
dmu_objset_find_dp() provide the name of the dataset so that we don't
have to search for it.
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <prashksp@gmail.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
linux_page_address() function in the LinuxKPI. This solves an issue
where the return value from linux_page_address() is passed to
kmem_free().
MFC after: 1 week
Sponsored by: Mellanox Technologies
The nfsv4_seqsession() call returns NFSERR_REPLYFROMCACHE when it has a
reply in the session, due to a requestor retry. The code erroneously
assumed a return of 0 for this case. This patch fixes this and adds
a KASSERT(). This would be an extremely rare occurrence. It was found
during code inspection during the pNFS server development.
MFC after: 2 weeks
[Assembler] Enable nicer diagnostics for inline assembly.
Fixed test.
Summary:
Enables source location in diagnostic messages from the backend.
This is after parsing, during finalization. This requires the
SourceMgr, the inline assembly string buffer, and DiagInfo to still
be alive after EmitInlineAsm returns.
This patch creates a single SourceMgr for inline assembly inside the
AsmPrinter. MCContext gets a pointer to this SourceMgr. Using one
SourceMgr per call to EmitInlineAsm would make it difficult for
MCContext to figure out in which SourceMgr the SMLoc is located,
while a single SourceMgr can figure it out if it has multiple
buffers.
The Str argument to EmitInlineAsm is copied into a buffer and owned
by the inline asm SourceMgr. This ensures that DiagHandlers won't
print garbage. (Clang emits a "note: instantiated into assembly
here", which refers to this string.)
The AsmParser gets destroyed before finalization, which means that
the DiagHandlers the AsmParser installs into the SourceMgr will be
stale. Restore the saved DiagHandlers.
Since now we're using just one SourceMgr for multiple inline asm
strings, we need to tell the AsmParser which buffer it needs to parse
currently. Hand a buffer id -- returned from SourceMgr::
AddNewSourceBuffer -- to the AsmParser.
Reviewers: rnk, grosbach, compnerd, rengolin, rovka, anemet
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29441
This improves error reporting for some inline assembly constructs that
clang does not approve of: instead of crashing with a "fatal backend
error", it will now show a normal error message, and point out the
location of the problematic assembly.
Reported by: mmel
MFC after: 1 week
busdma know, so that on architectures where dma isn't always coherent, we
know we don't have to write-back/invalidates cachelines on DMA operations.
Reviewed by: andrew, mav
The sysctl(HW_PAGESIZE) call cannot fail on FreeBSD kernels at least.
And even if it failed for some improbable reason, PAGE_SIZE is a safe
value to return.
Discussed with: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
validation of SEG.ACK as the first step. If the ACK is not acceptable,
a RST segment should be sent and the segment should be dropped.
Up to now, the segment was partially processed.
This patch moves the check for the SEG.ACK validation up to the front
as required.
Reviewed by: hiren, gnn
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D10424
By default this logs to syslog only, not stderr. It makes it difficult
to debug exactly what's going on. So allow '-e' to log to stderr so I
have a chance of actually debugging wlanwds /dynamic WDS (DWDS) issues.
PCB SP cache acquires extra reference, when SP is stored in the cache.
Release this reference when PCB is destroyed in ipsec_delete_pcbpolicy().
In ipsec_copy_pcbpolicy() release reference to SP in case if sp_in or
sp_out are not NULL.
Reported by: Slawa Olhovchenkov <slw at zxy spb ru>
MFC after: 1 week
before we increase irq again, or we'd end up choosing an irq, and then
really using the next one, even if it's not available.
Also in the inner loop, correct the end check so that we check every irq,
even the last one.
This makes the msk(4) adapter able to use MSI on Softiron Overdrive 1000.
This check has been redundant since it was introduced in r162554.
Reviewed by: emaste, glebius
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10322
When this option is enabled, only gdb and kgdb are installed to
/usr/libexec for use by crashinfo(8). Other bits of GDB such as
gdbserver and gdbtui are not installed. For this option to be
effective, GDB must be enabled.
Rework r317094 to re-enable GDB on all platforms but enable
GDB_LIBEXEC on platforms for which the GDB in ports is a superset of
functionality.
Reviewed by: emaste, kib
Suggested by: kib
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10449
7252 7628 compressed zfs send / receive
illumos/illumos-gate@5602294fda5602294fdahttps://www.illumos.org/issues/7252
This feature includes code to allow a system with compressed ARC enabled to
send data in its compressed form straight out of the ARC, and receive data in
its compressed form directly into the ARC.
https://www.illumos.org/issues/7628
We should have longer, more readable versions of the ZFS send / recv options.
7628 create long versions of ZFS send / receive options
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Dan Kimmel <dan.kimmel@delphix.com>
wait for the next enqueue from the driver.
Reviewed by: gnn@, hselasky@, gallatin@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D10432
