- Improve newer AMD processor support (Family 0Fh Revision F and later).
- Adjust offset if DiodeOffet is set and valid. Note it is experimental
but it seems to give us more realistic temperatures. Newer Linux driver
blindly adds 21C for Family 0Fh desktop processors, however.
- Always populate dev.cpu and dev.amdtemp sysctl trees regardless of probe
order for consistency. Previously, dev.cpu.N.temperature was not populated
if amdtemp was loaded later than ACPI CPU driver and temperatures were not
accessible from dev.amdtemp.N.sensor0 tree for Family 10h/11h processors.
- Read the CPUID from PCI register instead of CPUID instruction to prevent
possible revision mismatches on multi-socket system.
- Change macros and variables to make them closer to AMD documents.
- Fix style(9) nits and improve comments.
Different sub-kinds of PCI buses may have different rules and
thus it is up for the bus backends to do proper input checks.
For example, PCIe allows configuration register numbers < 0x1000,
while for PCI proper the limit is 0x100.
And, in fact, the buses already do the checks.
Reviewed by: jhb
MFC after: 1 week
X-ToDo: add check for negative value to bus backends
X-ToDo: use named constant for maximum PCIe register
API, keeping backward compatibility.
First consumer for this functionality is going to become forthcoming MPD-5.4,
supporting CoA and DR of RFC 3576: Dynamic Authorization Extensions to RADIUS.
MFC after: 1 month
"set vesa mode" and higher 16bits of the flag would be the desired mode.
One can now set, for instance, hint.sc.0.flags=0x01680180, which means
that the system should set VESA mode 0x168 upon boot.
Submitted by: paradox <ddkprog yahoo com>, swell k at gmail.com with
some minor changes.
| grep <modname>' can be used instead.
Put a message behind bootverbose as
ichwd0: <Intel ICH6M watchdog timer> on isa0
ichwd0: Intel ICH6M watchdog timer (ICH6 or equivalent)
does not make a lot of sense.
MFC after: 1 week
where we figure out the hostname length under the lock, malloc the buffer
with the lock dropped, then recheck the length under the lock and loop again
if the buffer is now too small.
Tested by: Norbert Koch nkoch demig de
MFC after: 3 days
FreeBSD 8, the compatibility shims should be built not just when FreeBSD 7
compatibility is requested, but also when compatibility with any older
FreeBSD version where that feature was present is requested.o
Without this patch, a kernel config that sets COMPAT_FREEBSD6 but not *7
would fail to build due to inconsistencies between the declaration of the
compatibility shims and their use in the SysV code.
There are similar errors in other *proto.h headers in the tree.
MFC after: 3 weeks
Rather than writing out a MID of '0', write a MID of 0x86 (aka
MID_I386) so that file gets it right.
This is a nop for boot2. It just checks the MAGIC part of the field,
ignoring the MID. boot2 is the only thing that loads this file, and
only on x86 so the MID_i386 is always the right value (the rest of the
code is already x86 specific).
Reviewed by: bde@, jhb@
MFC after: 8.0 is out the door :)
longs. Since 32bit processes longs are 4 bytes, 64bit kernel may copy in
or out 4 bytes more then the process expected.
Calculate the amount of bytes to copy taking into account size of fd_set
for the current process ABI.
Diagnosed and tested by: Peter Jeremy <peterjeremy acm org>
Reviewed by: jhb
MFC after: 1 week
vnodes, since these nodes are not linked into the mount queue and,
as such, the vn_lock() cannot cause a deadlock so LORs are harmless.
Suggested by: kib
Approved by: kib (mentor)
MFC after: 3 days
The hook calls vn_fullpath(9), that should not be executed with a vnode
lock held.
Reported by: Bruce Cran <bruce cran org uk>
Tested by: pho
MFC after: 3 days
