Both cd and xprt will be non-NULL after their respective malloc(9) wrappers are
called (mem_alloc and svc_xprt_alloc, which calls mem_alloc) as mem_alloc
always gets called with M_WAITOK|M_ZERO today. Thus, testing for them being
non-NULL is incorrect -- it misleads Coverity and it misleads the reader.
Remove some unnecessary NULL initializations as a follow up to help solidify
the fact that these pointers will be initialized properly in sys/rpc/.. with
the interfaces the way they are currently.
Differential Revision: https://reviews.freebsd.org/D6572
MFC after: 2 weeks
Reported by: Coverity
CID: 1007338, 1007339, 1007340
Reviewed by: markj, truckman
Sponsored by: EMC / Isilon Storage Division
if_iwm - GC some dead code, left by a partially applied OpenBSD change.
Taken-From: OpenBSD (if_iwm.c r1.69)
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD git 07dfed32ea39b980b0b80d27ff938e7c3ca4c0b5
optimized copy-on-write faults. This has two advantages: (1) one less radix
tree operation is performed and (2) vm_page_replace_checked() cannot fail,
making the code simpler.
Submitted by: Ryan Libby
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4478
DR #289[0] came down and gcc4.2.1 was on the wrong side of history.
Partially revert GCC r42574 (just remove the error) to rectify the parse
bug to match Clang and other compliant C99 compilers.
An example declaration gcc tripped on before this fix:
void foobar(int [static 1]);
An example declaration gcc did not trip on before this fix:
void foobar(int name[static 1]);
Bump __FreeBSD_cc_version.
[0]: http://www.open-std.org/JTC1/SC22/WG14/www/docs/dr_289.htm
Reported by: allanjude
Sponsored by: EMC / Isilon Storage Division
In r277943, the efinet_match() routine was changed to use an off by one
when matching network interfaces. The effect was that using "net1"
actually used the device attached to "net0".
Digging into the hardware that needed this workaround more, I found that
UEFI was creating two simple network protocol devices for each physical
NIC. The first device was a "raw" Ethernet device and the second device
was a "IP" device that used the IP protocol on top of the underlying
"raw" device. The PXE code in the firmware used the "IP" device to pull
across the loader.efi, so currdev was set to "net1" when booting from the
physical interface "net0". (The loaded image's device handle referenced
the "IP" device that "net1" claimed.)
However, the IP device isn't suitable for doing raw packet I/O (and the
current code to open devices exclusively actually turns the "IP" devices
off on these systems).
To fix, change the efinet driver to only attach to "raw" devices. This
is determined by fetching the DEVICE_PATH for each handle which supports
the simple network protocol and examining the last node in the path. If
the last node in the path is a MAC address, the device is assumed to be
a "raw" device and is added as a 'netX' device. If the last node is not
a MAC address, the device is ignored.
However, this causes a new problem as the device handle associated with
the loaded image no longer matches any of the handles enumerated by
efinet for systems that load the image via the "IP" device. To handle
this case, expand the logic that resolves currdev from the loaded image
in main(). First, the existing logic of looking for a handle that
matches the loaded image's handle is tried. If that fails, the device
path of the handle that loaded the loaded image is fetched via
efi_lookup_image_devpath(). This device path is then walked from the
end up to the beginning using efi_handle_lookup() to fetch the handle
associated with a path. If the handle is found and is a known handle,
then that is used as currdev. The effect for machines that load the
image via the "IP" device is that the first lookup fails (the handle
for the "IP" device isn't claimed by efinet), but walking up the
image's device path finds the handle of the raw MAC device which is used
as currdev.
With these fixes in place, the hack to subtract 1 from the unit can now
be removed, so that setting currdev to 'net0' actually uses 'net0'.
PR: 202097
Tested by: ambrisko
Sponsored by: Cisco Systems
This will be more accurate as the actual name is provided if ran
from an absolute path in do_execve().
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Passing MAKEOBJDIRPREFIX to the main prog build (rescue) would confuse
WITH_AUTO_OBJ and cause it to create a recursed object directory that
then broke the actual prog build. This is normally not a problem since
we do not call 'make -f prog.mk obj' before building anything in it.
Crunchgen(1) also assumes that if -o is not passed then if an object
directory does not already exist then it should build in the source
directories. The normal buildworld process will have already ran 'make
obj' in each of the component directories so this is not a problem.
With WITH_AUTO_OBJ though this is not the case. So we must tell
crunchgen(1) that MK_AUTO_OBJ=yes will create the directory and to not
require it be present before generating its Makefile.
Sponsored by: EMC / Isilon Storage Division
This would otherwise disallow using meta files from a foreign build that
spread them around in directories outside our own .OBJDIR.
Sponsored by: EMC / Isilon Storage Division
The main prog has a dependency on the submake targets to ensure they are
built. From bsd.crunchgen.mk though we already have our own dependency
on 'make objs' so there is no need for another one. Crunchgen(1) is
doing the right thing here so it is not modified.
This also prevents the CC fix tainting the submake environment with
META_MODE and causing rebuilds. The CC passed is is only intended for
the main prog itself.
Sponsored by: EMC / Isilon Storage Division
This fixes --sysroot and other CFLAGS/LDFLAGS not being respected
in the crunchgen build since it is not including bsd.sys.mk and
other files. For example, this fixes building rescue itself without
--sysroot and other CFLAGS.
Sponsored by: EMC / Isilon Storage Division
Since multiple files are generated from one build command, only
the first to run will actually generate a .meta file. This fix
prevents 'required but missing' rebuilds on each target.
Sponsored by: EMC / Isilon Storage Division
Because bmake defaults to .../share/mk now, this code was not doing anything
to help objdir builds (such as the rescue build). Export the same default.
Sponsored by: EMC / Isilon Storage Division
This allows using META_MODE directly from the kernel build directory.
This also allows removing a hack from the DIRDEPS_BUILD kernel target.
Sponsored by: EMC / Isilon Storage Division
This was previously set after the hook and only if auxargs were present.
Now always provide it if possible.
MFC after: 2 weeks
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6546
This allows an EVENTHANDLER(process_exec) hook to see if the new image
will cause credentials to change whether due to setgid/setuid or because
of POSIX saved-id semantics.
This adds 3 new fields into image_params:
struct ucred *newcred Non-null if the credentials will change.
bool credential_setid True if the new image is setuid or setgid.
This will pre-determine the new credentials before invoking the image
activators, where the process_exec hook is called. The new credentials
will be installed into the process in the same place as before, after
image activators are done handling the image.
MFC after: 2 weeks
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6544
While here, fix the various net driver callbacks to return early instead
of crashing if this fails. (The 'init' callback from the netif interface
doesn't return an error if the protocol lookup fails.)
Sponsored by: Cisco Systems
