Assume ELF images without OSREL use the new auxv format.
This is specially important for rtld, that is not tagged. Using
direct exec mode with new (ELFv2) binaries that expect the new auxv
format would result in crashes otherwise.
Unfortunately, this may break direct exec'ing old binaries,
but it seems better to correctly support new binaries by default,
considering the transition to ELFv2 happened quite some time
ago. If needed, a sysctl may be added to allow old auxv format to
be used when OSREL is not found.
Reviewed by: bdragon
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D25651
For ieee80211_add_channel+*() we are passing in an int flag for
ht40 and in some cases another int flag for vht80 where we'd only
need two bits really.
Convert these variables to a bitflag and fold them together into one.
This also allows for VHT160 and VHT80P80 and whatever may come to
be considered. Define the various options currently needed.
Change the drivers (rtwn and rsu) which actually set this bit to non-0.
For convenience the "1" currently used for HT40 is preserved.
Enahnce getflags_5ghz() to handle the full set of VHT flags based
on the input flags from the the driver.
Update the regdomain implementation as well to make use of the new
flags and deal with higher [V]HT bandwidths.
ieee80211_add_channel() specifically did not take flags so it will
not support naything beyond 20Mhz channels.
Note: I am not entirely happy with the "cbw_flag[s]" name, but we
do use chan_flags elsewhere already.
MFC after: 2 weeks
Reviewed by: adrian, gnn
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential revision: https://reviews.freebsd.org/D26091
The semantic of the pidx argument of isc_rxd_flush() is the
last valid index of in the free list, rather than the next
index to be published. However, netmap was still using the
old convention. While there, also refactor the netmap_fl_refill()
to simplify a little bit and add an assertion.
MFC after: 2 weeks
Without this change the buildworld/buildkernel epilogue looks like this:
>>> World built in 249 seconds, sysctl: cannot stat /proc/sys/hw/ncpu: No such file or directory
ncpu: , make -j72.
Reviewed By: emaste, bdrewery
Differential Revision: https://reviews.freebsd.org/D26056
This is a change in preparation for stopping to use lorder.sh (D26044) and
instead assume that we have a linker newer than ~1990. Without lorder.sh
duplicates end up being passed to the linker when building .so files and this
can result in duplicate symbol definition errors.
There is one minor change: libcompiler_rt.a will no longer provide
gcc_personality_v0 and instead we now only have it in libgcc_eh.a/libgcc_s.so.
This matches GCC's behaviour.
Reviewed By: emaste, cem
Differential Revision: https://reviews.freebsd.org/D26042
The added print was very helpful for debugging failed disk image creation.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D23200
This should fix cases like su setting argv[0] to _su for /bin/sh.
Previously cheribsdbox (a crunched tool we use in CheriBSD to reduce the
size of our minimal disk images to allow loading them onto FPGAs without
waiting forever for the transfer) would complain about _su not being
compiled in, but now that we also look at AT_EXECPATH it correctly
invokes the sh tool.
Note: we use use AT_EXECPATH instead of the KERN_PROC_PATHNAME sysctl to get
the crunchgen binary name since it seems like KERN_PROC_PATHNAME just
returns the last cached path for a given hardlink.
When using `su`, instead of invoking /bin/csh this would invoke the last
used hardlink to cheribsdbox. This caused weird test failures when running
tests due to `id` being executed instead of `echo`:
$ id # id is a hardlink to /bin/cheribsdbox
$ su postgres -c 'echo 1' # su is also a hardlink
uid=1001(postgres) gid=1001(postgres) groups=1001(postgres)
Obtained from: CheriBSD
Reviewed By: emaste, brooks
Differential Revision: https://reviews.freebsd.org/D25998
This ensure that running make install inside buildenv correctly includes
the METALOG flags when building with -DNO_ROOT.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D26038
The NVMe emulation code did not explicitly initialize queue head and
tail pointers on queue creation. As these pointers are part of
calloc()'ed memory, this only becomes a problem if the queues are
deleted and then recreated.
This error can manifest with messages about completions not matching a
command.
Some operating systems believe bhyve's emulated NVMe drive is failing
based on certain values in the SMART / Health Information log page being
zero. Fix is to set the reported temperature and available spare values
to reasonable defaults.
Submitted by: wanpengqian@gmail.com
Reviewed by: grehan
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24202
This solves an issue on stable/12 that causes certs to not get installed.
ls is apparently not in PATH during installworld, so TRUSTED_CERTS ends up
blank and nothing gets installed. We don't really require anything
ls-specific, though, so let's just simplify it.
MFC after: 3 days
In set_vht_extchan() the checks are performed in the order of VHT20/40/80.
That means if a channel has a lower and higheer VHT flag set we would
return the lower first.
We normally do not set more than one VHT flag so this change is supposed
to be a NOP but follows the logical thinking order of returning the best
first. Also we nowhere assert a single VHT flag so make sure we'll not
be stuck with VHT20 when we could do more.
While here add the debugging printfs for VHT160 and VHT80P80 which still
need doing once we deal with a driver at that level.
Reviewed by: adrian, gnn
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26088
While here change the field size from long to int and move it into the
gap next to cn_flags.
Shrinks struct componentname from 64 to 56 bytes on amd64.
We can switch into long mode directly with LA57 enabled.
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
Since LA57 was moved to the main SDM document with revision 072, it
seems that we should have a support for it, and silicons are coming.
This patch makes pmap support both LA48 and LA57 hardware. The
selection of page table level is done at startup, kernel always
receives control from loader with 4-level paging. It is not clear how
UEFI spec would adapt LA57, for instance it could hand out control in
LA57 mode sometimes.
To switch from LA48 to LA57 requires turning off long mode, requesting
LA57 in CR4, then re-entering long mode. This is somewhat delicate
and done in pmap_bootstrap_la57(). AP startup in LA57 mode is much
easier, we only need to toggle a bit in CR4 and load right value in CR3.
I decided to not change kernel map for now. Single PML5 entry is
created that points to the existing kernel_pml4 (KML4Phys) page, and a
pml5 entry to create our recursive mapping for vtopte()/vtopde().
This decision is motivated by the fact that we cannot overcommit for
KVA, so large space there is unusable until machines start providing
wider physical memory addressing. Another reason is that I do not
want to break our fragile autotuning, so the KVA expansion is not
included into this first step. Nice side effect is that minidumps are
compatible.
On the other hand, (very) large address space is definitely
immediately useful for some userspace applications.
For userspace, numbering of pte entries (or page table pages) is
always done for 5-level structures even if we operate in 4-level mode.
The pmap_is_la57() function is added to report the mode of the
specified pmap, this is done not to allow simultaneous 4-/5-levels
(which is not allowed by hw), but to accomodate for EPT which has
separate level control and in principle might not allow 5-leve EPT
despite x86 paging supports it. Anyway, it does not seems critical to
have 5-level EPT support now.
Tested by: pho (LA48 hardware)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
Currently, we parse notes for the values of ELF FreeBSD feature flags
and osrel. Knowing these values, or knowing that image does not carry
the note if pointers are NULL, is useful to decide which ABI variant
(brand) we want to activate for the image.
Right now this is only a plumbing change
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
It allows a sysent to share existing usermode data in shared page with
other sysent, assuming ABI differences are not in the layout of the
page.
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
Should unbreak gcc build as reported by tinderbox:
lib/libc/gen/scandir.c:59:12: warning: 'alphasort_thunk' declared 'static' but never defined [-Wunused-function]
Rx is more efficient within the chip when the receive buffer size
matches the TLS PDU size.
MFC after: 3 days
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26127
Attempt of adding assertions that pgrp->pg_jobc counters do not
underflow in r361967, reverted in r362910, points out bugs in the
handling of job control. Peter Holm was able to narrow down the
problem to very easy reproduction with timeout(1) which uses reaping.
The following list of problems with calculation of pg_jobs which
directs SIGHUP/SIGCONT delivery for orphaned process group was
identified:
- Re-calculation of the orphaned status for children of exiting parent
was wrong, but mostly unnoticed when all children were reparented to
init(8). When child can be reparented to a different process which
could affect the child' job control state, it was not properly
accounted for in pg_jobc.
- Lockless check for exiting process' parent process group is racy
because nothing prevents the parent from changing its group
membership.
- Exited process is left in the process group, until waited. This
affects other calculations of pg_jobc.
Split handling of job control status on process changing its process
group, and process exiting. Calculate increments and decrements for
pg_jobs by exact checking the orphanage instead of assuming process
group membership for children and parent. Move the call to killjobc()
later under the proctree_lock. Mark exiting process in killjobc()
with a new flag P_TREE_GRPEXITED and skip it for all pg_jobc
calculations after the flag is set.
Add checker that independently recalculates pg_jobc value and compares
it with the memoized process group state. This is enabled under INVARIANTS.
Reviewed by: jilles
Discussed with: kevans
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D26116
mtree(5) and mtree(8) come from different contrib sources. The former
already had an xref to the latter, but not the other way around.
MFC after: 1 week
No functional changes.
Most of the routing flags are stored in the netxtop instead of rtentry.
Rename rt->rt_flags to rt->rte_flags to simplify reading/modifying code
checking routing flags.
In the new multipath code, rt->rt_nhop may actually point to nexthop group
instead of nhop. To ease transition, reduce the amount of rt->rt_nhop->...
accesses.
Differential Revision: https://reviews.freebsd.org/D26156
hw.bus.devctl_disable has tagged been obsolete for a decade. Remove it. Also
remove some long obsolete comments. This was done and backed out once in 2014,
but we've had enough releases with the 'new' method of setting queue length that
we can just remove this sysctl now (stable/11, stable/12 and current all don't
reference it).
RTF_HOST indicates whether route is a host route
(netmask is empty or /{32,128}).
Check that if netmask is empty and host route is not specified, kernel
returns an error.
Differential Revision: https://reviews.freebsd.org/D26155
