/sbin/route has a bug where if it is passed an interface name that does
not exist, it falls through and winds up interpreting it as a hostname.
It fails out eventually, but on a system where DNS lookup is broken you
can end up waiting for up to 60 seconds waiting for the DNS lookup to
timeout. I'm not quite sure what happens if the DNS lookup somehow
succeeds but I doubt that can end well.
Reviewed by: markj, cem
MFC after: 2 weeks
Sponsored by: EMC/Isilon Storage Division
r284708 addressed this slightly but seems to have put the make(showconfig)
guard in the wrong place. Rather than guard setting the default obj directory,
guard inclusion of auto.obj.mk. This avoids creating SRCTOP/obj and
SRCTOP/release/obj when running makeman.
Sponsored by: EMC / Isilon Storage Division
This is relevant for makeman using the 'make targets' output in src.conf(5).
This makes a _UNIVERSE_TARGETS that removes arm64 if the build
requirements are not met.
* the tx descriptor TID is priority, not TID.
* the tx descriptor queue id mapping is separate from the
TID/priority; rather than just "BE".
TODO:
* go and re-re-re-verify the queue mappings; the linux and openbsd
mappings aren't exactly the same. I need to verify all of this
before I try to flip on 11n RX.
This avoids easily colliding multiple src trees with the same objects. Having
multiple checkouts in dir/ dir2/ dir3/ would all use obj/ without any unique
identifier inside of obj/. This pattern is more likely to be used due
to the non-META_MODE behavior working with it fine.
In environments where ../obj/ is wanted as the obj directory the value of
OBJROOT can be set to ${SRCTOP:H}/obj/ instead via src-env.conf (set by
SRC_ENV_CONF) or environment. For environment it must be single quoted or
escaped. This will be more likely for vendors who are building images or using
NFS for builds. In those cases MAKEOBJDIRPREFIX may already be utilized and
is supported.
Discussed with: imp
Sponsored by: EMC / Isilon Storage Division
The preferred way to modify the object directory root is to use OBJROOT.
However, setting OBJROOT to ${MAKEOBJDIRPREFIX}/${SRCTOP}/ effectively behaves
as expected.
The problem with this before was that setting OBJROOT to contain SRCTOP
resulted in a recursive replacement (/usr/obj/usr/obj/usr/src/). Anchoring to
the start of the path for replacing SRCCTOP in CURDIR resolves this by
avoiding replacing SRCTOP when CURDIR is within the OBJDIR.
Sponsored by: EMC / Isilon Storage Division
* Do 1T1R for now, until we read the config out of ROM and use it.
* Disable turbo mode, I dunno what this is, but the linux drivers
have this disabled.
* Set the firmware endpoints to what we read from USB.
Tested:
* RTL8712 cut 3, STA mode
data queues.
This is similar to the openbsd and rtlwifi/r92su drivers.
Note: this driver still assumes it's a 4-endpoint device; I'll enforce
that in a follow-up commit.
Due to the use of int's for file offsets in the VOP_WRITE_(PRE|POST)
macros, kqueue write events for files greater 2GB where never fired.
This caused tail -f on a file greater 2GB to never see updates.
MFC after: 1 week
Relnotes: YES
Sponsored by: Multiplay
Currently FreeBSD supports only single PIC controller. Some systems
that have more than one (like ThunderX dual-socket) fails to boot.
Disable other PICes until proper handling is implemented in the
generic interrupt code.
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3682
cpu_init_fdt will now release memory allocated for structures
serving CPUs that have failed to init.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3297
When the system has more than a single PCI domain, the bus numbers
are not unique, thus they cannot be used for "pci" device numbering.
Change bus numbers to -1 (i.e. to-be-determined automatically)
wherever the code did not care about domains.
Reviewed by: jhb
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3406
resolvconf.conf so that resolvconf won't replace the manually configured
forwarders with dynamically configured ones the next time the lease is
renewed.
This would lead to the 2nd build (after the first with a missing OBJROOT) to
always rebuild everything as the 'command' would have changed due to the path
changing from having // to only /.
Sponsored by: EMC / Isilon Storage Division
TDB_USERWR flag may still be set after a debugger detaches from a
process via PT_DETACH. Previously the flag would never be cleared
forcing a double fetch of the system call arguments for each system
call. Note that the flag cannot be cleared at PT_DETACH time in case
one of the threads in the process is currently stopped in
syscallenter() and the debugger has modified the arguments for that
pending system call before detaching.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3678
MAKEOBJDIR is based on OBJTOP so cannot be expanded until OBJTOP is set.
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com>
Sponsored by: EMC / Isilon Storage Division
sent SIGHUP and SIGCONT if any of the processes are stopped. Currently this
behavior is triggered for any type of process stop including ptrace() stops
and transient stops for single threading during exit() and execve().
Thus, if a debugger is attached to a process in a group when the leader
exits, the entire group can be HUPed. Instead, only send the signals if a
process in the group is stopped due to SIGSTOP.
PR: 201149
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3681
Problem description:
How do we currently perform layer 2 resolution and header imposition:
For IPv4 we have the following chain:
ip_output() -> (ether|atm|whatever)_output() -> arpresolve()
Lookup is done in proper place (link-layer output routine) and it is possible
to provide cached lle data.
For IPv6 situation is more complex:
ip6_output() -> nd6_output() -> nd6_output_ifp() -> (whatever)_output() ->
nd6_storelladdr()
We have ip6_ouput() which calls nd6_output() instead of link output routine.
nd6_output() does the following:
* checks if lle exists, creates it if needed (similar to arpresolve())
* performes lle state transitions (similar to arpresolve())
* calls nd6_output_ifp() which pushes packets to link output routine along
with running SeND/MAC hooks regardless of lle state
(e.g. works as run-hooks placeholder).
After that, iface output routine like ether_output() calls nd6_storelladdr()
which performs lle lookup once again.
As a result, we perform lookup twice for each outgoing packet for most types
of interfaces. We also need to maintain runtime-checked table of 'nd6-free'
interfaces (see nd6_need_cache()).
Fix this behavior by eliminating first ND lookup. To be more specific:
* make all nd6_output() consumers use nd6_output_ifp() instead
* rename nd6_output[_slow]() to nd6_resolve_[slow]()
* convert nd6_resolve() and nd6_resolve_slow() to arpresolve() semantics,
e.g. copy L2 address to buffer instead of pushing packet towards lower
layers
* Make all nd6_storelladdr() users use nd6_resolve()
* eliminate nd6_storelladdr()
The resulting callchain is the following:
ip6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_resolve()
Error handling:
Currently sending packet to non-existing la results in ip6_<output|forward>
-> nd6_output() -> nd6_output _lle() which returns 0.
In new scenario packet is propagated to <ether|whatever>_output() ->
nd6_resolve() which will return EWOULDBLOCK, and that result
will be converted to 0.
(And EWOULDBLOCK is actually used by IB/TOE code).
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D1469
