This is mostly needed for a common arm64/amd64 iommu code.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D26587
Add EXAMPLES section to the man page showing the use of all flags except for
-S.
While here, clarify -f description. It not only suppresses diagnostic messages
but it also affects the exit status of the command itself. This is shown in two
of the examples.
Approved by: bcr@
Differential Revision: https://reviews.freebsd.org/D26588
OpenZFS will start using some of the kernel timekeeping bits
shortly. This implements the bare minimum of that which currently
is just the time_seconds variable.
This function isn't ACPI dependent and we may use it on FDT systems
as well.
o Don't repeat the function declaration, include iommu.h instead.
Reviewed by: andrew, kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D26584
This was introduced when I merged r361287 to OpenZFS and has been fixed
there already, commit 3f6bb6e43fd68e.
Reported by: swills
Reviewed by: allanjude, freqlabs, mmacy
LLVM 11 changed the meaning of '-O' from '-O2' to '-O1', which resulted
in debug kernels (with 'makeoptions DEBUG=-g') being built with inlining
disabled, causing severe performance hit.
The -O2 was already being used for building amd64, powerpc, and powerpcspe.
Discussed with: jrtc27, arichardson, bdragon, jhibbits
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26471
This avoids setting the association in an inconsistent
state, which could result in a use-after-free situation.
This can be triggered by a malicious peer, if the peer
can modify the cookie without the local endpoint recognizing
it.
Thanks to Ned Williamson for reporting the issue.
MFC after: 3 days
Bind the netmap tx queues to a special '0xff' scheduling class which
makes the firmware skip some processing related to rate limiting on the
outgoing traffic. Future firmwares will do this automatically.
MFC after: 1 week
Sponsored by: Chelsio Communications
root's calendar files three times, once each for root, toor and
daemon.
This relates to bug 246943, but does not solve it. See discussion in
bug report for more details.
PR: 246943
Reported by: wcarson.bugzilla@disillusion.net
- Only active netmap receive queues should be in the RSS lookup table.
- The RSS table should be restored for NIC operation when the last
active netmap queue is switched off, not the first one.
- Support repeated netmap ON/OFF on a subset of the queues. This works
whether the the queues being enabled and disabled are the only ones
active or not. Some kring indexes have to be reset in the driver for
the second case.
MFC after: 1 week
Sponsored by: Chelsio Communications
Basically it reverts one chunk that reversed the parsing logic, making
legacy variants of invocation, like `procstat -a -f', non-operational.
Reported and tested by: Dewayne Geraghty <dewayne@heuristicsystems.com.au>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
For interfaces that do not support SIOCGIFMEDIA (for which there are
quite a few) the only fallback is to query the interface for
if_data->ifi_link_state. While it's possible to get at if_data for an
interface via getifaddrs(3) or sysctl, both are heavy weight mechanisms.
SIOCGIFDATA is a simple ioctl to retrieve this fast with very little
resource use in comparison. This implementation mirrors that of other
similar ioctls in FreeBSD.
Submitted by: Roy Marples <roy@marples.name>
Reviewed by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26538
Until we can do proper /etc/rc output on both consoles in multicons
boot (or all of them if we ever generalize), report when we are
booting multicons. Also report the primary console. This will be a big
hint why output stops after this line (though some slow USB discovery
still happens after mountroot / init starts).
Reviewed by: scottl@, tsoome@
Differential Revision: https://reviews.freebsd.org/D26574
Report what console the boot loader is telling the kernel to use:
o Dual (Serial Primary)
o Dual (Video Primary)
o Serial
o Video
This allows the user to interrupt the boot and tweak the cosnole, if
needed, in a trivial way. Useful for installs where the default
selected may not be quite what you want, or when you are running a
dual setup and need to toggle over to the other console being primary.
The 'c'/'C' keys will do the cycling through the consoles. Note:
you'll still have to drop into the loader to set details about serial
consoles. And this doesn't change the console the loader is using.
Reviewed by: kevans@
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D26573
Use address of the pointer passed to kernel to determine whether the pointer
is a FDT block (physical address) or a module pointer (virtual kernel address).
This fragment was supposed to be committed before r366196, but I accidentally
skipped it in a patch series.
Reported by: bz
Rather than hard coding ada0 everywhere, use ${dev}. Also, set
dev=vtbd0 since both qemu and bhyve support this. More work
should be done to use labels instead for fstab.
qemu scripts likely need adjustment. And we should also
likely generate byhve scripts too.
The video on PCI heuristic was broken. It was supposed to infer a
video device when the last element of the path was a PCI DEVICE PATH
node. However, the last node in the device path is an END node, so
this heuristic never fired.
This leads, among other things, to bhyve only producing output in the
serial connection once we leave the boot loader. This restores the
dual headed boot on bhyve + UEFI (as we did in 11.2), but will favor
serial in the absence of other config which may be a change from 11.2.
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D26572
In order to prioritize iSCSI traffic across a network,
DSCP can be used. In order not to rely on "ipfw setdscp"
or in-network reclassification, this adds the dscp value
directly to the portal group (where TCP sessions are accepted).
The incoming iSCSI session is first handled by ctld for any
CHAP authentication and the socket is then handed off to the
in-kernel iscsi driver without modification of the socket
parameters. Simply setting up the socket in ctld is sufficient
to keep sending outgoing iSCSI related traffic with the
configured DSCP value.
Reviewed by: mav, trasz
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26385
from 32 to 28) by shrinking some entries and reordering them.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26508
messages using DATA chunks. Don't use fsn_included when not being
sure that it is set to an appropriate value. If the default is
used, which is -1, this can result in SCTP associaitons not
making any user visible progress.
Thanks to Yutaka Takeda for reporting this issue for the the
userland stack in https://github.com/pion/sctp/issues/138.
MFC after: 3 days
We have a few shortcuts in the arm trap code to speed up obvious "must fail"
cases. In these situations, make sure that we fill in the "sig" and "code"
fields of the generated signal.
MFC after: 3 weeks
It was removed in r355289 but forgot to return it back when new u-boot booti
support was committed. Although booti is not the preferred method of
booting the kernel, it is very useful for the initial phase of porting
FreeBSD to a new platform or booting the kernel on various embedded boards
in an industrial environment.
Don't map same physical memory multiple times with different cache attributes.
This is explicitly stated as architectural undefined behavior, leading to
coherency issues sooner or later.
using an open_to_lock_owner4 when that lock_owner4 has already
been created by a previous open_to_lock_owner4. This caused the NFS server
to reply NFSERR_INVAL.
For NFSv4.0, this is an error, although the updated NFSv4.0 RFC7530 notes
that the correct error reply is NFSERR_BADSEQID (RFC3530 did not specify
what error to return).
For NFSv4.1, it is not obvious whether or not this is allowed by RFC5661,
but the NFSv4.1 server can handle this case without error.
This patch changes the NFSv4.1 (and NFSv4.2) server to handle multiple
uses of the same lock_owner in open_to_lock_owner so that it now correctly
interoperates with the Linux NFS client.
It also changes the error returned for NFSv4.0 to be NFSERR_BADSEQID.
Thanks go to Bjorn for diagnosing this and testing the patch.
He also provided a program that I could use to reproduce the problem.
Tested by: bj@cebitec.uni-bielefeld.de (Bjorn Fischer)
PR: 249567
Reported by: bj@cebitec.uni-bielefeld.de (Bjorn Fischer)
MFC after: 3 days
There may be additional 64-bit ABIs supported, so use a positive check rather
than a negative check.
Suggested by: imp
MFC after: 1 week
Sponsored by: Juniper Networks, Inc
Prune dead mirrors from the list of mirrors in bsdconfig and bsdinstall.
All these return NXDOMAIN when trying to resolve them.
Reviewed by: emaste
Approved by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26535
I had failed to notice that sgsendccb() was using cam_periph_mapmem()
and thus was not passing down user pointers directly to drivers. In
practice this broke requests submitted from userland.
PR: 249395
Reported by: Trenton Schulz <trueos@norwegianrockcat.com>
Reviewed by: scottl
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26550
Allow the necessary parts of systm.h to be visible in the _STANDALONE
environnment. Limit the reset to only being visible for _KERNEL
builds. Map KASSERT, etc to printf on failure in the bootloader until
we have more confidence things won't break and leave systems
unbootable. Eventually, this should map to a full panic in the
bootloader, but that also needs some enhancement to be more useful.
Reviewed by: tsoome, jhb
Differential Revision: https://reviews.freebsd.org/D26543
