Commit Graph

1136 Commits

Author SHA1 Message Date
Yoshihiro Takahashi
3e4e484918 Move the ips driver from ${MACHINE_ARCH} == "i386" to ${MACHINE} == "i386".
Approved by:	re (scottl)
2003-05-13 11:26:08 +00:00
Scott Long
3bd9d6f570 Hook up the ips module 2003-05-11 06:40:09 +00:00
Scott Long
2aedd662d8 Add the 'ips' driver for the IBM (now Adaptec) ServeRAID controller
series.  This driver was generously developed and released by David
Jeffreys and Adaptec.  I've updated it to work with 5.x and fixed a
few bugs.

MFC After:	1 week
2003-05-11 06:36:49 +00:00
Julian Elischer
f2bb1cae36 Part one of undating the bluetooth code to the newest version
Submitted by:   Maksim Yevmenkin <m_evmenkin@yahoo.com>
Approved by: re@
2003-05-10 21:44:42 +00:00
Shunsuke Akiyama
11e04b0528 Add RealTek RTL8150 USB to fast Ethernet controller driver.
This driver now supports the Melco LUA-KTX and the GREEN HOUSE
GH-USB100B.

Reviewed by:	imp
MFC after:	2 weeks
2003-05-03 10:16:56 +00:00
Nate Lawson
51773ddf47 Support functions for the new ACPI import.
* AcpiOsDerivePciId(): finds a bus number, given the slot/func and the
    acpi parse tree.
  * AcpiOsPredefinedOverride(): use the sysctl hw.acpi.os_name to
    override the value for _OS.

Ideas from:	takawata, jhb
Reviewed by:	takawata, marcel
Tested on:	i386, ia64
2003-04-29 18:50:34 +00:00
Hartmut Brandt
33cfde03bc Convert the midway driver to use busdma. Except for this conversion the
following changes have been done:

- stylify. The original code was too hard to read.
- get rid of a number of compilation options (Adaptec-only, Eni-only, no-DMA).
- more debugging features.
- locking. This is not correct yet in the absence of interface layer locking,
  but is correct enough to not to cause lock order reversals.
- remove RAW mode. There are no users of this in the tree and I doubt that
  there are any.
- remove NetBSD compatibility code. There was no way to keep NetBSD non-busdma
  and FreeBSD busdma code together.
- if_en now buildable as a module.

This has been actively tested on sparc64 and i386 with ENI server and
client cards and an Adaptec card (thanks to kjc).

Reviewed by:	mdodd, arr
2003-04-25 16:14:03 +00:00
Bill Paul
87b4a25958 Add device driver support for the ASIX Electronics AX88172 USB 2.0
ethernet controller. The driver has been tested with the LinkSys
USB200M adapter. I know for a fact that there are other devices out
there with this chip but don't have all the USB vendor/device IDs.

Note: I'm not sure if this will force the driver to end up in the
install kernel image or not. Special magic needs to be done to exclude
it to keep the boot floppies from bloating again, someone please
advise.
2003-04-20 19:05:33 +00:00
Hidetoshi Shimokawa
77ee030b5f MFp4(simokawa_firewire):
Many internal structure changes for the FireWire driver.

- Compute CRC in CROM parsing.
- Add support for configuration ROM build.
- Simplify dummy buffer handling.
- busdma conversion
- Use swi_taskqueue_giant for -current.  Mark the interrupt routine as MPSAFE.
- AR buffer handling.
	Don't reallocate AR buffer but just recycle it.
	Don't malloc and copy per packet in fwohci_arcv().
	Pass packet to fw_rcv() using iovec.
	Application must prepare receiving buffer in advance.
- Change fw_bind API so that application should pre-allocate xfer structure.
- Add fw_xfer_unload() for recycling struct fw_xfer.
- Add post_busreset hook
- Remove unused 'sub' and 'act_type' in struct fw_xfer.
- Remove npacket from struct fw_bulkxfer.
- Don't call back handlers in fwochi_arcv() if the packet has
	not drained in AT queue
- Make firewire works on big endian platform.
- Use native endian for packet header and remove unnecessary ntohX/htonX.
- Remove FWXFERQ_PACKET mode.  We don't use it anymore.
- Remove unnecessary restriction of FWSTMAXCHUNK.
- Don't set root node for phy config packet if the root node is
	not cycle master capable but set myself for root node.
	We should be the root node after next bus reset.

	Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp>
- Improve self id handling

Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
Bernd Walter
ca3acad1d7 add EHCI (USB 2.0) controller support.
Approved by:	joe
		gallatin (mentor)
Obtained from:  NetBSD
2003-04-14 14:04:08 +00:00
Max Khon
7d0de413cb Driver for Granch SBNI16 SHDSL modem
Submitted by:	Denis I. Timofeev <timofeev@granch.ru>
MFC after:	1 week
2003-04-13 06:27:13 +00:00
Yoshihiro Takahashi
ba32bfe24e The dpt, ex and idt modules are for i386 only. 2003-04-13 01:32:03 +00:00
Matthew N. Dodd
efc5f672bd - Add PCI support (Adaptec AHA-2920/A,Future Domain TMC-18XX/3260).
- Reduce duplicated code.

PR:             50427
Submitted by:   Bob Bishop <rb@gid.co.uk>
2003-04-07 10:13:25 +00:00
Matthew N. Dodd
e3a2085326 opt_geom.h is no longer required for this module. 2003-03-29 16:13:11 +00:00
Matthew N. Dodd
991aa7bf9a Add 'idt' driver to module build. 2003-03-29 15:56:13 +00:00
Matthew N. Dodd
56376071e3 Add module infrastructure for 'dpt' driver. 2003-03-29 15:47:13 +00:00
Matthew N. Dodd
79ac92f83c Add module infrastructure for 'if_ex'. 2003-03-29 15:41:44 +00:00
Matthew N. Dodd
81d9009a65 Add module infrastructure for 'vpd' and 'smbios' and move 'smbios'
to new home.
2003-03-29 15:20:45 +00:00
Matthew N. Dodd
187e120cbe Add module infrastructure for elink. 2003-03-29 13:42:20 +00:00
Matthew N. Dodd
dd4cb1b8b8 Add module infrastructure for if_ie. 2003-03-29 13:40:41 +00:00
Matthew N. Dodd
be8e35bebd 'speaker' not 'atspeaker' 2003-03-29 10:01:03 +00:00
Matthew N. Dodd
a71a307383 Retire 'atspeaker' and 'pcspeaker'. We'll use 'speaker' which
is the same as the config device directive.

Reminded by:	 Takahashi Yoshihiro <nyan@jp.FreeBSD.org>
2003-03-29 09:59:49 +00:00
Matthew N. Dodd
94c35e0af2 Merge PC98 support. 2003-03-25 05:19:18 +00:00
Matthew N. Dodd
0d98179d63 I seem to have forgotten this. Sorry. 2003-03-24 22:25:08 +00:00
Matthew N. Dodd
b7b5ae3edb Use repo-copied files in sys/i386/bios. 2003-03-24 19:14:46 +00:00
Matthew N. Dodd
2152ccaa64 Don't build if_iso88025subr.c into the oltr module. 2003-03-15 23:24:17 +00:00
Ruslan Ermilov
99bca5069e Simplify the assignment statement. 2003-03-12 14:32:46 +00:00
Sam Leffler
98822e3945 fix module building; drivers now require opt_{ubsec,hifn}.h 2003-03-11 23:20:43 +00:00
Sam Leffler
ac7e2c0515 FIPS 140-2 rng data tester for h/w crypto devices. This driver periodically
monitors the entropy data harvested by crypto drivers to verify it complies
with FIPS 140-2.  If data fails any test then the driver discards it and
commences continuous testing of harvested data until it is deemed ok.
Results are collected in a statistics block and, optionally, reported on
the console.  In normal use the overhead associated with this driver is
not noticeable.

Note that drivers must (currently) be compiled specially to enable use.

Obtained from:	original code by Jason L. Wright
2003-03-11 19:26:16 +00:00
Shunsuke Akiyama
20280807ca Fix device freeze to reduce output packet size.
And make this value configurable by kernel config or sysctl.
2003-03-09 11:50:27 +00:00
Yoshihiro Takahashi
484be8eac1 Build the drm module also on pc98. 2003-03-09 10:12:58 +00:00
Eric Anholt
43e2d1e384 Update the DRM to latest from DRI CVS. This is approximately the version
included in XFree86 4.3, but includes some fixes.  Notable changes include
Radeon 8500-9100 support, PCI Radeon/Rage 128 support, transform & lighting
support for Radeons, and vblank syncing support for r128, radeon, and mga.
The gamma driver was removed due to lack of any users.
2003-03-09 02:08:30 +00:00
Jonathan Lemon
921f8bb982 Fix module build by adding options to Makefile. 2003-03-08 21:54:32 +00:00
Peter Wemm
3c6b084e96 Finish driving a stake through the heart of netns and the associated
ifdefs scattered around the place - its dead Jim!

The SMB stuff had stolen AF_NS, make it official.
2003-03-05 19:24:24 +00:00
David Schultz
9c62b3ee7c Make TTYHOG tunable.
Reviewed by:	mike (mentor)
2003-03-05 08:16:29 +00:00
Robert Watson
03d031626d A cute yet small MAC policy that provides a simple ACL mechanism to
permit users and groups to bind ports for TCP or UDP, and is intended
to be combined with the recently committed support for
net.inet.ip.portrange.reservedhigh.  The policy is twiddled using
sysctl(8).  To use this module, you will need to compile in MAC
support, and probably set reservedhigh to 0, then twiddle
security.mac.portacl.rules to set things as desired.  This policy
module only restricts ports explicitly bound using bind(), not
implicitly bound ports where the port number is selected by the
IP stack.  It appears to work properly in my local configuration,
but needs more broad testing.

A sample policy might be:

  # sysctl security.mac.portacl.rules="uid:425:tcp:80,uid:425:tcp:79"

This permits uid 425 to bind TCP sockets to ports 79 and 80.  Currently
no distinction is made for incoming vs. outgoing ports with TCP,
although that would probably be easy to add.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-03-02 23:01:42 +00:00
Mark Murray
c1f4590524 This is not going to win prizes for the most useful module ever,
but it is useful to me for some testing and warns-fixing.
2003-02-27 18:08:44 +00:00
Ruslan Ermilov
e4de92ce2b Hook up the if_my module to the build. 2003-02-27 14:49:56 +00:00
Tim J. Robbins
ef9e45dd01 Build the ncp and nwfs modules again, but only on i386 for now. 2003-02-27 11:31:08 +00:00
Scott Long
3f9be55c27 Revert the use of -g that leaked in. 2003-02-26 06:56:46 +00:00
Scott Long
7874f606d5 Introduce a new taskqueue that runs completely free of Giant, and in
turns runs its tasks free of Giant too.  It is intended that as drivers
become locked down, they will move out of the old, Giant-bound taskqueue
and into this new one.  The old taskqueue has been renamed to
taskqueue_swi_giant, and the new one keeps the name taskqueue_swi.
2003-02-26 03:15:42 +00:00
Marcel Moolenaar
907cf80fbf Remove support for running in SimOS. The support has rotted over
time and there's no indication that it will improve anytime soon.
By removing support for SimOS it is possible to build LINT on
Alpha, which is considered more important at the moment.

Not objected to on: alpha@
2003-02-25 00:42:40 +00:00
Eric Anholt
05d1e23aa7 Split the arch-specific AGP files into the appropriate files.* and do the same
for the agp module, and add agp to the list of modules to compile for alpha.
Add an alpha_mb() to agp_flush_cache for alpha -- it's not correct but may
improve the situation, and it's what linux and NetBSD do.
2003-02-14 06:33:52 +00:00
Peter Wemm
f801952a0b We only provide agp drivers for the intel chipsets, move the agp
subdir to the i386-only section.
2003-02-13 21:13:10 +00:00
Hidetoshi Shimokawa
85c8ffea1d Remove unnecessary EXPORT_SYMS. 2003-02-13 13:42:19 +00:00
Yoshihiro Takahashi
f9df75c095 pci_if.h is not needed. 2003-02-07 15:05:37 +00:00
Yoshihiro Takahashi
3febcc57ec - Clean up ISA DMA supports.
- Rename all sndbuf_isadma* functions to sndbuf_dma* and move them into
  sys/dev/sound/isa/sndbuf_dma.c.

No response from:	sound
2003-02-07 14:05:34 +00:00
Yoshihiro Takahashi
6780ab5432 isa_if.h is not needed.
No response from:	sound
2003-02-07 13:56:33 +00:00
Doug Ambrisko
233896e9da Take the rc4 code out of ng_mppc module so we don't fail to load when
we have the rc4 code already in the kernel (via wlan stuff or awi).
Add a dependency on the rc4 module so if it doesn't exist then load it.

Reviewed by:	archie
2003-02-05 19:11:11 +00:00
Hajimu UMEMOTO
ca26842e2a Add IPv6 support for Linuxlator.
Reviewed by:	dwmalone
MFC after:	10 days
2003-02-03 17:43:20 +00:00