Due to removing some targets that the previous .ORDER: ${WMAKE_TGTS}
set, it was no longer being respected; _build_tools was coming
immediately.
Pointyhat to: bdrewery
X-MFC-with: r325244
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The loader strategy() function is assuming 512B blocks, so we need to adjust
ptblread() for other sector sizes.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D12847
There's no good reason to treewalk the entire tree removing old OBJDIRS
and creating new ones when 'includes', 'libraries', and 'everything' are
all skipped. The only shared directory in the existing toolchain target
and world is build-tools. So handle cleaning in it directly if needed
only for the directories it wants to build.
The extra _obj/_cleanobj walks came in the initial kernel-toolchain
addition in r128189.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
It merely wanted to use 'all' rather than 'build-tools' so just
add a build-tools target to the Makefile.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
ifl_pidx and ifl_credits are going out of sync in _iflib_fl_refill() as they
use different update log. Use the same update logic for both, and add a
final call to isc_rxd_refill() to handle early exits from the loop.
PR: 221990
Reported by: pho
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12798
Do not read all statistics from the device, instead count them in the
driver except from RX drops - they are received directly from the NIC
in the AENQ descriptor.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: Amazon.com, Inc.
Differential Revision: https://reviews.freebsd.org/D12852
The newest ena-com HAL supports LLQv2 and introduces
API changes. In order not to break the driver compilation
it was updated/fixed in a following way:
* Change version of the driver to 0.8.0
* Provide reset cause when triggering reset of the device
* Reset device after attach fails
* In the reset task free management irq after calling ena_down. Admin
queue can still be used before ena_down is called, or when it is
being handled
* Do not reset device if ena_reset_task fails
* Move call of the ena_com_dev_reset to the ena_down() routine - it
should be called only if interface was up
* Use different function for checking empty space on the sq ring
(ena-com API change)
* Fix typo on ENA_TX_CLEANUP_THRESHOLD
* Change checking for EPERM with EOPNOTSUPP - change in the ena-com API
* Minor style fixes
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Amazon.com, Inc.
Semihalf
Sponsored by: Amazon.com, Inc.
Differential Revision: https://reviews.freebsd.org/D12143
RTC-8583 is time-of-day clock used in some SOHO routers. This clock has
only 2 bits for year values, but thanks to user SRAM it's possible to save
year value and keep it up to date via driver code.
Tested on Planex_MZK-W300NAG (SoC is RT2880)
Submitted by: Hiroki Mori <yamori83@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D12833
RT2880 is MIPS4Kc SoC used in many SOHO routers. This commits adds GPIO pin
control configuration of RT2880.
Submitted by: Hiroki Mori <yamori83@yahoo.co.jp>
Reviewed by: mizhka, sgalabov
Differential Revision: https://reviews.freebsd.org/D12648
If vdev_geom_close doesn't close the consumer, then the subsequent call
to vdev_geom_open() would be just a NOP and would always return success.
Thus, at present vdev_reopen() would always succeed for vdev_geom devices
even if the underlying provider is in error state.
The problem was introduced as a result of an optimization in rS308055.
The most significant manifistation of the problem is that
zio_vdev_io_done() --> vdev_probe() --> SPA_ASYNC_PROBE -->
spa_async_probe() --> vdev_reopen()
chain of calls and events becomes a NOP as well.
This chain is invoked when zio_vdev_io_done() detects an "unexpected"
error from the lower level I/O.
Additionally, that call path may race with SPA_ASYNC_REMOVE path because
of the asynchronous nature of them both. So, the SPA_ASYNC_PROBE may
erroneously mark a vdev as being healthy after SPA_ASYNC_REMOVE marked
it as removed.
Reviewed by: asomers, mav
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12731
At present, g_slice_orphan and g_slice_spoiled destroy the softc
(struct g_slicer) even before calling g_wither_geom, so there can
be active and incoming io requests at that time and g_slice_start
can access the softc.
This commit changes the code to destroy the softc only after all
providers are closed.
While there, a couple of small cleanups.
Reported by: Ben RUBSON <ben.rubson@gmail.com>
Tested by: Ben RUBSON <ben.rubson@gmail.com>
Reviewed by: mav, smh (earlier version)
MFC after: 2 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D12809
Rework the dTSEC and FMan drivers to be more like a full bus relationship,
so that dtsec can use bus_alloc_resource() instead of trying to handle the
offset from the dts. This required taking some code from the sparc64 ebus
driver to allow subdividing the fman region for the dTSEC devices.
Now that a proper sysroot is used and a separate target list, it should
be safe to skip building the initial cross-compiler.
X-MFC-With: r325001
MFC after: 1 month
Sponsored by: Dell EMC Isilon
iru_init() was declared and used outside the DEV_NETMAP
conditional blocks, but was implemented inside one. Move the
implementation out of the DEV_NETMAP block to allow building with
netmap disabled.
Reported by: Andrew Turner <andrew@fubar.geek.nz>
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12842
RELSRCTOP is likely not as useful since make will always be running from
inside of .OBJDIR and using something like ${.CURDIR}/${RELSRCTOP} is
not redundant for ${SRCTOP}.
Sponsored by: Dell EMC Isilon
This fixes object files landing in the source tree in gnu/usr.bin/dtc
for GCC platforms.
We cannot reliably detect if an external compiler is used here, and the
default YES option does include GCC_BOOTSTRAP which implies that GCC may
be used for the build.
The problem manifests when not using an external compiler, and the host
compiler is clang. When a fresh build is done (no OBJDIR yet) the
'make obj' treewalk is done before 'make cross-tools', so
COMPILER_FEATURES at this point contains 'c++11' since the host compiler
was used for COMPILER_FEATURES. Once cross-tools builds the GCC
bootstrap compiler and then descends into 'make everything',
COMPILER_FEATURES no longer contains 'c++11' and MK_GPL_DTC defaults to
enabled. Now it builds in gnu/usr.bin/dtc without an OBJDIR preset and
drops files into the source tree.
The COMPILER_FEATURES check here is useful for knowing if we can *bootstrap*
C++11 things. Indeed we do bootstrap dtc as a build tool so it is
useful for enabling the BSD dtc for the build, but we end up needing the
GPL dtc for installation anyway.
Reviewed by: manu, emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12817
