When enough time has passed for users to update their userland the kernel
fix will be applied. This will change the ABI to have x0 point to the args
and sp be correctly aligned.
It is expected this compatibility code can be removed when the kernel and
qemu usermode emulation have both been updated for the new ABI.
This fixes clang failures, and most likely other crashes.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
The requirement is for a GCC-compatible compiler and not necessarily
GCC itself. However, we currently expect any compiler used for building
the whole of FreeBSD to be GCC-compatible and many things will break if
not; there's no longer a need to have an explicit test for this in rtld.
Reviewed by: imp, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2422
According to standard, the presence of the flags only means that the
object path must be resolved at the time object loading, instead of my
reading that the flag is required to enable token substitution at all.
The consequence is that -z origin linker flag is no longer required
for the token substitution in the run/rpath or the needed library
soname. It is only recommended if token substition is needed at
dlopen(3) time, since namecache might drop the required entries at the
time of resolution.
Found, reviewed and tested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
* Add VCREAT flag to indicate when a new file is being created
* Add VVERIFY to indicate verification is required
* Both VCREAT and VVERIFY are only passed on the MAC method vnode_check_open
and are removed from the accmode after
* Add O_VERIFY flag to rtld open of objects
* Add 'v' flag to __sflags to set O_VERIFY flag.
Submitted by: Steve Kiernan <stevek@juniper.net>
Obtained from: Juniper Networks, Inc.
GitHub Pull Request: https://github.com/freebsd/freebsd/pull/27
Relnotes: yes
as always participating in the global symbols namespace, regardless of
the way the object was brought into the process address space.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is only an interim fix; MIPS should be using the MI code instead,
which does not have this issue.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D661
ABI specifies that, for R_AARCH64_TLSDESC relocations, we use the symbol
value, addend, and object tls offset to calculate the offset from the tls
base. We then cache this value for future reference.
Differential Revision: https://reviews.freebsd.org/D2183
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
still need libc_pic for a few things, but this is expected to be ready
soon.
Differential Revision: https://reviews.freebsd.org/D2136
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
rtld on x86 to be hidden. This is a micro-optimization, which allows
intrinsic references inside rtld to be handled without indirection
through PLT. The visibility of rtld symbols for other objects in the
symbol namespace is controlled by a version script.
Reviewed by: kan, jilles
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
without any translation. If the file is a symbolic link, $ORIGIN may not be
expanded to the actual origin. Use realpath(3) to properly expand $ORIGIN
to its absolute path.
Reviewed by: kib
MFC after: 1 week
Avoid use of register variables, which some compilers (e.g. clang)
don't like. It makes the code a little clearer as well.
This allows a clang 3.5 built powerpc world to run (tested in a jail).
MFC after: 1 week
The symbol leaked after r276630 since lib/libc/sys/openat.c defines
versions for openat using .symver (version script cannot assign two
versions to one symbol), and rtld uses openat. Instead, directly use
__sys_openat().
Reported and tested by: antoine
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
rtld-elf for powerpc 32 bit:
libexec/rtld-elf/powerpc/reloc.c:486:6: error: taking the absolute value of unsigned type 'Elf_Addr' (aka 'unsigned int') has no effect [-Werror,-Wabsolute-value]
if (abs(offset) < 32*1024*1024) { /* inside 32MB? */
^
libexec/rtld-elf/powerpc/reloc.c:486:6: note: remove the call to 'abs' since unsigned values cannot be negative
if (abs(offset) < 32*1024*1024) { /* inside 32MB? */
^~~
1 error generated.
Cast 'offset' to int, since that was intended, and should be safe to do
on architectures with 32-bit two's complement ints.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D1387
it exports to the debugger. It currently has two choices: it can use
a compiled-in path (/libexec/ld-elf.so.1) or it can use the path stored
in the interpreter path in the binary being executed. The runtime linker
currently prefers the second. However, this is usually wrong for compat32
binaries since the binary specifies the path of rtld on a 32-bit system
(/libexec/ld-elf.so.1) instead of the actual path (/libexec/ld-elf32.so.1).
For now, always assume the compiled in path (/libexec/ld-elf32.so.1) as
the rtld path and ignore the path in the binary for the 32-bit runtime
linker.
Differential Revision: https://reviews.freebsd.org/D1236
Reviewed by: kib
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
This implements part of RFC-2217
It's based off a patch originally written by Sujal Patel at Isilon, and
contributions from other Isilon employees.
PR: 173728
Phabric: D995
Reviewed by: markj, markm
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
for i386/amd64. Rather, it only works on i386/amd64 and should only be
built there. Rather than change the default based on which
architecutre, do things more directly by only building it on
i386/amd64 and having it always on. This is how we handle other
options that are relevant only for a few architectures.
Linux LD_ITERATE_PHDR(3):
The dlpi_name field is a null-terminated string giving the
pathname from which the shared object was loaded.
That functionality is much more useful than returning just the short
name.
Approved by: kan
Sponsored by: The FreeBSD Foundation
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week