Update the iflib version of ixl driver based on the OOT version ixl-1.11.29.
Major changes:
- Extract iflib specific functions from ixl_pf_main.c to ixl_pf_iflib.c
to simplify code sharing between legacy and iflib version of driver
- Add support for most recent FW API version (1.10), which extends FW
LLDP Agent control by user to X722 devices
- Improve handling of device global reset
- Add support for the FW recovery mode
- Use virtchnl function to validate virtual channel messages instead of
using separate checks
- Fix MAC/VLAN filters accounting
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: erj@
Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D24564
Summary:
Radix on AIM, and all of Book-E (currently), can do direct addressing of
user space, instead of needing to map user addresses into kernel space.
Take advantage of this to optimize the copy(9) functions for this
behavior, and avoid effectively NOP translations.
Test Plan: Tested on powerpcspe, powerpc64/booke, powerpc64/AIM
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D25129
Due to the ordering of the powerpc64 linker script, we were discarding
all notes before emitting .note.gnu.build-id. This had the effect of
generating an empty build id section and breaking the kern.build_id
sysctl added in r348611.
powerpc and powerpcspe are uneffected.
PR: 246430
MFC after: 3 days
Sponsored by: Tag1 Consulting, Inc.
Honoring the kernel-supplied opt_ipsec.h in r361632 causes builds of
ipsec modules to fail if the kernel doesn't include IPSEC_SUPPORT.
However, the module can never be loaded into such a kernel, so only
build the modules if the kernel includes IPSEC_SUPPORT.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D25059
To make this simpler, set the default contents of opt_ipsec.h
for standalone modules in sys/conf/config.mk.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25046
With IFUNC support in the kernel, we can finally get rid of our poor-man's
ifunc for pmap, utilizing kobj. Since moea64 uses a second tier kobj as
well, for its own private methods, this adds a second pmap install function
(pmap_mmu_init()) to perform pmap 'post-install pre-bootstrap'
initialization, before the IFUNCs get initialized.
Reviewed by: bdragon
The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.
These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.
For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.
A man page for this driver will be forthcoming.
MFC after: 1 month
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21959
This reapplies logical r360944 and r360946 (reverting r360955), with fixed
copystr() stand-in replacement macro. Eventually the goal is to convert
consumers and kill the macro, but for a first step it helps if the macro is
correct.
Prior commit message:
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Add a coccinelle script to tools/ which can be used to mechanically
convert existing instances where replacement with strlcpy is trivial.
In the two cases which matched, fuse_vfsops.c and union_vfsops.c, the
code was further refactored manually to simplify.
Replace the declaration of copystr() in systm.h with a small macro
wrapper around strlcpy (with correction from brooks@ -- thanks).
Remove N redundant MI implementations of copystr. For MIPS, this
entailed inlining the assembler copystr into the only consumer,
copyinstr, and making the latter a leaf function.
Reviewed by: jhb (earlier version)
Discussed with: brooks (thanks!)
Differential Revision: https://reviews.freebsd.org/D24672
Implement support for AHCI controller found in
NXP QorIQ Layerscape SoCs.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24466
This patch introduces support for Epson RX-8803 RTC controller accessible
over I2C bus. It has a resolution of 1 sec.
Support for interrupt based alarm was not implemented.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24364
Add basic TCA6416 GPIO expander support over I2C bus. The driver handles
enabling and disabling pins, setting pin mode to IN and OUT and
toggling the pins. External interrupts are not supported.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu, mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24363
NXP LS1046A contains I2C controller compatible with Vybrid VF610.
Existing Vybrid MVF600 driver can be used to support it. For that purpose
declare driver as ofw_iicbus and add methods associated with ofw_iicbus.
For VF610 add dynamic clock prescaler calculation using clock information
from clock driver and clock frequency requested in device tree.
On the occasion add detach function and add additional error handling
in i2c_attach function.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24361
This patch adds a GPIO controller support targeted for NXP LS1046A
SoC. The driver implements the following features:
* setting direction of each pin (IN or OUT)
* setting the mode of output pins (PUSHPULL or OPENDRAIN)
* setting the state of each output pin (1 or 0)
* reading the state of each input pin (1 or 0)
Submitted by: Kamil Koczurek <kek@semihalf.com>
Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24353
Driver provides probe and attach functions for LS1046A clockgen and passes
configuration information to QorIQ clockgen class. It may be used as
a reference implementation for different QorIQ clockgen devices.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: mmel, manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24352
As usual, the full release notes are found on Github:
https://github.com/facebook/zstd/releases/tag/v1.4.5
Notable changes include:
* Improved decompress performance on amd64 and arm (5-10%
and 15-50%, respectively).
* '--patch-from' zstd(1) CLI option, which provides something like a very fast
version of bspatch(1) with slightly worse compression. See release notes.
In this update, I dropped the 3-year old -O0 workaround for an LLVM ARM bug;
the bug was fixed in LLVM SVN in 2017, but we didn't remove this workaround
from our tree until now.
MFC after: I won't, but feel free
Relnotes: yes
This variant get a random number up to the limit passed as the argument.
This is simply a copy of the libc version.
Sponsored-by: The FreeBSD Foundation
Reviewed by: cem, hselasky (previous version)
Differential Revision: https://reviews.freebsd.org/D24962
Remove our custom SYSTEM_LD definition. This generates program headers
that are more consistent with other architectures, and more importantly,
are in line with what loader(8) expects when loading a kernel.
As noted in https://reviews.freebsd.org/D22920, there is no apparent
reason why the kernel would need a writable text segment, so removal of
the -N flag isn't likely to cause issue.
Reviewed by: kp, br
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24909
-development is long and awkward, and is also inconsistent with prior art
from the Linux world, which uses -dev (Debian) or -devel (Red Hat). Follow
the Debian convention, and similarly for debug info packages.
Also remove redundant pkgbase development tag from includes. We already tag
include files with package=runtime,dev; there is no need to separately tag
them as dev.
Discussed with: bapt
Reviewed by: manu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24139
This change adds Hyper-V socket feature in FreeBSD. New socket address
family AF_HYPERV and its kernel support are added.
Submitted by: Wei Hu <weh@microsoft.com>
Reviewed by: Dexuan Cui <decui@microsoft.com>
Relnotes: yes
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D24061
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
It no longer has any in-kernel consumers via OCF. smbfs still uses
single DES directly, so sys/crypto/des remains for that use case.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24773
It no longer has any in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24772
This was removed from IPsec in r286100 and no longer has any in-tree
consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24769
It no longer has any in-tree consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24768
Summary:
POWER9 supports two MMU formats: traditional hashed page tables, and Radix
page tables, similar to what's presesnt on most other architectures. The
PowerISA also specifies a process table -- a table of page table pointers--
which on the POWER9 is only available with the Radix MMU, so we can take
advantage of it with the Radix MMU driver.
Written by Matt Macy.
Differential Revision: https://reviews.freebsd.org/D19516
This is a general cleanup of the relocatable kernel support on powerpc,
needed to enable kernel ifuncs.
* Fix some relocatable issues in the kernel linker, and change to using
a RELOCATABLE_KERNEL #define instead of #ifdef __powerpc__ for parts that
other platforms can use in the future if they wish to have ET_DYN kernels.
* Get rid of the DB_STOFFS hack now that the kernel is relocated to the DMAP
properly across the board on powerpc64.
* Add powerpc64 and powerpc32 ifunc functionality.
* Allow AIM64 virtual mode OF kernels to run from the DMAP like other AIM64
by implementing a virtual mode restart. This fixes the runtime address on
PowerMac G5.
* Fix symbol relocation problems on post-relocation kernels by relocating
the symbol table.
* Add an undocumented method for supplying kernel symbols on powernv and
other powerpc machines using linux-style kernel/initrd loading -- If
you pass the kernel in as the initrd as well, the copy resident in initrd
will be used as a source for symbols when initializing the debugger.
This method is subject to removal once we have a better way of doing this.
Approved by: jhibbits
Relnotes: yes
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23156
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
Currently functionality resides in rtsock.c, which is a controlling
interface, partially external to the routing subsystem.
Additionally, DDB-supporting functionality is > 100SLOC, which deserves
a separate file.
Given that, move this functionality to a newly-created net/route/ subdir.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D24561
Nexthop objects implementation, defined in r359823,
introduced sys/net/route directory intended to hold all
routing-related code. Move recently-introduced route_temporal.c and
private route_var.h header there.
Differential Revision: https://reviews.freebsd.org/D24597
Now that hw.machine_arch handles soft-float vs hard-float there is no
longer a reason for this config.
Submitted by: mhorne (kern.mk hunk)
Reviewed by: imp (earlier version), kp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24544
Add driver for Broadcom "GENET" version 5, as found in BCM-2711 on
Raspberry Pi 4B. The driver is derived in part from the bcmgenet.c
driver in NetBSD, along with bcmgenetreg.h.
Reviewed by: manu
Obtained from: in part from NetBSD
Relnotes: yes, note addition
Differential Revision: https://reviews.freebsd.org/D24436
Replace our hand-rolled functions with the generic ones provided by
kern/subr_physmem.c. This greatly simplifies the initialization of
physical memory regions and kernel globals.
Tested by: nick
Differential Revision: https://reviews.freebsd.org/D24154
The arm_physmem interface found in arm's MD code provides a convenient
set of routines for adding/excluding physical memory regions and
initializing important kernel globals such as Maxmem, realmem,
phys_avail[], and dump_avail[]. It is especially convenient for FDT
systems, since we can use FDT parsing functions and pass the result
directly to one of these physmem routines. This interface is already in
use on arm and arm64, and can be used to simplify this early
initialization on RISC-V as well.
This requires only a couple trivial changes:
- Move arm_physmem_kernel_addr to arm/machdep.c. It is unused on arm64,
and manipulated entirely in arm MD code.
- Convert arm32_btop/arm64_btop to atop. This is equivalently defined
on all architectures.
- Drop the "arm" prefix.
Reviewed by: manu, emaste ("looks reasonable")
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24153
Silence the "DWARF2 can only represent one section per compilation unit"
warning in amd64 GENERIC builds by disabling Clang's debuginfo generation for
this assembler file (-g0). The message is replaced by a warning from
ctfconvert that there is no debuginfo to convert (future work).
The file contains some metadata (several ELF notes) and some code. The code
does not appear to have anything that debuginfo would aid.
I looked at the generated debuginfo (readelf -w xen-locore.o) prior to this
change, and the metadata that would be disabled are things like associated
between binary offset and code line number (not especially useful with a
disassembler), and label metadata for the entry points (not especially useful
as this is already in the symbol table).
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D24384
It is not logically dependent on "device mem", and an arm kernel
compiled without that device fails to link since the minidumpsys()
symbol is referenced by kern_dump.c.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
