The function ignores result returned by linker_release_module().
The FW_UNLOAD flag on the file is cleared, so even on error it would
not be tried again.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
For some of them, used only when KTR or KMSAN are configured, apply
__unused attribute directly.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Mark variables as __diagused for invariant-only vars
Reviewed by: imp, mjg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32577
A future change to TOE TLS will require a software fallback for the
first few TLS records received. Future support for NIC TLS on receive
will also require a software fallback for certain cases.
Reviewed by: gallatin, hselasky
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32566
As a followup to SW KTLS assuming an OCF backend, rename
struct ocf_session to struct ktls_ocf_session and forward
declare it in <sys/ktls.h> to use as the type of
struct ktls_session.cipher.
Reviewed by: gallatin, hselasky
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32565
In particular, ktls_pending_rx_info() determines which TLS record is
at the end of the current receive socket buffer (including
not-yet-decrypted data) along with how much data in that TLS record is
not yet present in the socket buffer.
This is useful for future changes to support NIC TLS receive offload
and enhancements to TOE TLS receive offload. Those use cases need a
way to synchronize a state machine on the NIC with the TLS record
boundaries in the TCP stream.
Reviewed by: gallatin, hselasky
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32564
Stack gap code used on amd64 can also be reused for arm64. Point
sv_stackgap to elf64_stackgap to enable this feature.
Reviewed by: mw, kib, emaste
Tested by: mw
MFC: after 1 month
Differential Revision: https://reviews.freebsd.org/D32588
Notable upstream pull request merges:
#12392 Avoid panic in case of pool errors and missing L2ARC
#12448 skip snapshot in zfs_iter_mounted()
#12516 Fix NFS and large reads on older kernels
#12533 Fail invalid incremental recursive send gracefully
#12569 FreeBSD: Really zero the zero page
#12575 Reject zfs send -RI with nonexistent fromsnap
#12602 Correct refcount_add in dmu_zfetch
#12650 zpool should call zfs_nicestrtonum() with non-NULL handle
Obtained from: OpenZFS
OpenZFS commit: ec64fdb93d
There is a workaround in acpidump for an old IBM laptop. This is being
hit on a modern arm64 system causing acpidump to use the wrong field
when reading a later address.
As the laptop has a 32-bit CPU the only FreeBSD support for it is i386.
As such limit the workaround to that architecture.
Reviewed by: emaste, jkim, jhb (all earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32573
Devices in sys/dev should be architecture-independent and NOT #include
intr_machdep.h.
Reviewed by: mhorne royger
Differential Revision: https://reviews.freebsd.org/D29959
Bump the firmware version to 14.0 and set the firmware release date
to today.
Reviewed by: jhb, bz, imp
Differential Revision: https://reviews.freebsd.org/D32534
Problem is that rtld cannot reliably access updated environment.
This was made more obvious by bfd4c875a1. The application
environment can be in arbitrary state and place, system components
can observe it only during execve(2), or in case of rtld, right after
execve, when environment is still at know location and format.
Instead spawn ld-elf.so.1 in direct exec mode which can correctly read
all inherited updates to the environment.
PR: 259069
Reviewed by: arichardson, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32464
but still for tightly coupled things like ldd(1)
Rename paths.h to rtld_paths.h.
Add guard for rtld-specific externs declarations.
Add _COMPAT32_BASENAME_RTLD and _COMPAT32_PATH_RTLD.
Reviewed by: arichardson, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32464
ping uses a two-pass option parser. The first pass determines whether
ipv4 or ipv6 is desired, and the second parses the rest of the options.
But the first pass wrongly detects a '4' or '6' in an option's value as
a request to use ipv6 or ipv6 respectively, for example in an invocation
like "ping -c6 1.2.3.4".
Fix this confusion by including all options in the first round of
parsing, but ignoring those unrelated to ipv4/ipv6 selection.
PR: 258048
Reported by: ghuckriede@blackberry.com
Submitted by: ghuckriede@blackberry.com
MFC after: 2 weeks
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D32344
Previously in_pcbbind_setup returned EADDRNOTAVAIL for empty
V_in_ifaddrhead (i.e., no IPv4 addresses configured) and in6_pcbbind
did the same for empty V_in6_ifaddrhead (no IPv6 addresses).
An equivalent test has existed since 4.4-Lite. It was presumably done
to avoid extra work (assuming the address isn't going to be found
later).
In normal system operation *_ifaddrhead will not be empty: they will
at least have the loopback address(es). In practice no work will be
avoided.
Further, this case caused net/dhcpd to fail when run early in boot
before assignment of any addresses. It should be possible to bind the
unspecified address even if no addresses have been configured yet, so
just remove the tests.
The now-removed "XXX broken" comments were added in 59562606b9,
which converted the ifaddr lists to TAILQs. As far as I (emaste) can
tell the brokenness is the issue described above, not some aspect of
the TAILQ conversion.
PR: 253166
Reviewed by: ae, bz, donner, emaste, glebius
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D32563
The intention of the zfs_iter_mounted() is to traverse the dataset
and its descendants, not the snapshots. The current code can cause
a mounted snapshot to be included and thus zfs_open() on the snapshot
with ZFS_TYPE_FILESYSTEM would print confusing message such as "cannot
open 'rpool/fs@snap': snapshot delimiter '@' is not expected here".
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#12447Closes#12448
The vdev_id.conf "enclosure_symlinks" option persistently creates
and maps /dev/by-enclosure symlinks to dynamic /dev/sg* devices.
This patch fixes two issues:
1. The enclosure_symlinks feature was accidentally broken in:
vdev_id: Support daisy-chained JBODs in multipath mode
2. Even when working, the feature numbered the enclosure
sequentially rather than by HBA port number. That meant that
if a port was down or didn't appear in sysfs, then the
enclosure_sumlinks numbers would be numbered wrong.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#12660
Fix boot1 and loader on PowerPC64 little-endian (LE).
Due to endian issues, boot1 couldn't find the UFS boot partition
and loader wasn't able to load the kernel. Most of the issues
happened because boot1 and loader were BE binaries trying to access
LE UFS partitions and because loader expects the kernel ELF image
to use the same endian as itself.
To fix these issues, boot1 and loader are now built as LE binaries
on PPC64LE. To support this, the functions that call OpenFirmware
were enhanced to correctly perform endian conversion on its input
and output arguments and to change the CPU into BE mode before
making the calls, as OpenFirmware always runs in BE. Besides that,
some other small fixes were needed.
Submitted by: bdragon (initial version)
Reviewed by: alfredo, jhibbits
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D32160
in the generated functions for bus accessors. These are the most
noising instances for drivers when non-debug kernel is compiled with
clang 13.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32578
Recognize when the host part of a sharenfs attribute is an ipv6
Literal and pass that through without modification.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Felix Dörre <felix@dogcraft.de>
Closes: #11171Closes#11939Closes: #1894
When zfs_nicestrtonum() is called and there will be an error,
the message is left in libzfs handle, if provided. We can use
this message, to provide better feedback for user.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#12650
For $reason mobaxterm default on sending unusual sequence from home/del
key, which makes libedit unabel to catch them and bind them correctly.
mobaxterm seems popular on the windows environment, so add proper
keybinding to default shrc configuration so it works out of box.
Reported by: lme
The ACPI ID may not be the same as the FreeBSD CPU id. Use the former
when finding the CPU domain as there is no requirement for it to be
identical to the latter.
Reported by: dch, kevans
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32546
Somehow we end up having 2 definition of the same .shrc in the source
tree, both of them should have been updated.
A batter fix would be to only keep one copy of the same file. but that
would be for another commit
Reported by: lme
In the recent history sh(1) has gain the missing features for it to
become a usable interractive shell:
- command completion
- persistent history support
- improvements on the default bindings in emacs mode
- improvements in the vi mode (repect $EDITOR)
- print a newline when exiting via ^D
- default prompt and improvements on how PS1 can be configured
- and more.
This changes also simplifies making tiny freebsd images with only sh(1)
as a shell
In the default configuration add 2 bindings which has been requested by
many during the HEADSUP discussion:
* csh like arrow history navigation
* ctrl-arrow to jump from word to words
Add an alias to make the history command exist as an alias to fc -l.
Patch the manpage to remove references to devq_openings and devq_queued.
Document the allocated tag that has been added in the same commit. The
relevant code change was committed as r271588
(959ec2581b) by mav@.
PR: 223651
MFH after: 3 days
Reported by: Bertrand Petit <bsdpr@phoe.frmug.org>
The virtual LAPIC driver uses callouts to implement the LAPIC timer.
Callouts are armed using callout_reset_sbt(), which currently puts
everything on CPU 0. On systems running many bhyve VMs this results in
a large amount of contention for CPU 0's callout lock.
Modify vlapic to schedule callouts on the local CPU instead. This
allows timer interrupts to be scheduled more evenly among CPUs where
bhyve is running.
Reviewed by: grehan, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32559
None of the usual suspects (e.g., drm-kmod, virtualbox-ose-kmod,
nvidia-driver) seem to be affected by the changes, but it is likely that
something else is affected.
Sponsored by: The FreeBSD Foundation
Now vm_page_alloc() and friends will unconditionally preserve PG_ZERO,
so there is no point in setting this flag.
Eliminate a local variable and add a comment explaining why we
prioritize the allocation when the process is doomed.
No functional change intended.
Reviewed by: kib, alc
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32036
