Commit Graph

55 Commits

Author SHA1 Message Date
Ian Lepore
a285d10007 Add arm option ARM_NEW_PMAP, to allow us to begin adding the new pmap
code alongside the existing implementation and quickly toggle between
the two implementations when testing.  Once the new code is past its
teething stage we can remove this option.
2014-12-30 02:51:04 +00:00
Ian Lepore
7e96dec7bb Add ARMV6 as an arm option. This will cause obscure magic in config(8)
to automatically set the armv6 option when MACHINE_ARCH is armv6.  That
allows replacing ever-growing lists of cpu names as options to compile
a given file with the using either "optional armv6" or "optional !armv6".
2014-11-24 00:02:15 +00:00
Ian Lepore
81d54b79fc Remove the ARM_DEVICE_MULTIPASS option and make its effect be the default.
Multipass device attachment was tested on many arm platforms by users and
only success was reported on the arm@ mailing list.  This is just the
long-delayed followup of making it the default.

Multipass attachment is necessary when using vendor-supplied FDT data,
because our devices may need to be attached in a different order than they
are described in the FDT data.
2014-10-26 18:30:35 +00:00
Ian Lepore
970775a5d2 Add an arm option, ARM_DEVICE_MULTIPASS, used to opt-in to multi-pass
device attachment on arm platforms.  If this is defined, nexus attaches
early in BUS_PASS_BUS, and other busses and devices attach later, in the
pass number they are set up for.  Without it defined, nexus attaches in
BUS_PASS_DEFAULT and thus so does everything else, which is status quo.

Arm platforms which use FDT data to enumerate devices have been relying
on devices being attached in the exact order they're listed in the dts
source file.  That's one of things currently preventing us from using
vendor-supplied fdt data (because then we don't control the order of the
devices in the data).  Multi-pass attachment can go a long way towards
solving that problem by ensuring things like clock and interrupt drivers
are attached before the more mundane devices that need them.

The long-term goal is to have all arm fdt-based platforms using multipass.
This option is a bridge to that, letting us enable it selectively as
platforms are converted and tested (the alternative being to just throw
a big switch and try to fight fires as they're reported).
2014-08-05 19:06:45 +00:00
Andrew Turner
27521ff8e4 Add the start of the ARM platform code. This is based on the PowerPC
platform code, it is expected these will be merged in the future when the
ARM code is more complete.

Until more boards can be tested only use this with the Raspberry Pi and
rrename the functions on the other SoCs.

Reviewed by:	ian@
2014-05-17 11:27:36 +00:00
Ian Lepore
2a4eeaa4d2 Change NO_EVENTTIMERS from an arm-specific to an MI option, so that it can
be used in MI code.

This is intended as a temporary measure to unbreak the build.  The real fix
is to write event timer drivers for legacy arm hardware, then get rid of
this option completely.  That's going to take a few days.
2014-04-02 19:51:29 +00:00
Ian Lepore
a297028904 Remove all traces of support for ARM chips prior to the arm9 series. We
never actually ran on these chips (other than using SA1 support in an
emulator to do the early porting to FreeBSD long long ago).  The clutter
and complexity of some of this code keeps getting in the way of other
maintenance, so it's time to go.
2014-03-09 21:12:31 +00:00
Ian Lepore
007aeeced6 Remove the ARM_USE_SMALL_ALLOC option and code related to it.
This was an optimization used only by a few xscale platforms.  Part of
the optimization was to create a direct map for all physical pages, and
that resulted in making multiple mappings of pages in a way that bypassed
the logic in pmap.c to handle VIVT cache aliasing.  It also just generally
made the code more complex and hard to maintain for all SoCs.

Reviewed by:	cognet
2014-02-08 22:21:38 +00:00
Andrew Turner
979d76c948 Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with
memory at the end of the kernel.

This helps reduce the SoC and board specific configuration required.

Reviewed by:	bsdimp
Tested by:	jmg (armeb), br
2014-01-28 09:12:04 +00:00
Warner Losh
88b842d215 Add support for mapping a small range of the SoC devices for debugging
purposes early in boot.
2014-01-22 21:23:58 +00:00
Warner Losh
871bdaab53 Allow AT91_MCI_ALLOW_OVERCLOCK to be an option in kernel config files. 2013-12-30 18:07:50 +00:00
Ganbold Tsagaankhuu
543c9e95f2 Add identification and necessary type checks for Krait CPU cores. Krait CPU is used in
Qualcomm Snapdragon S4 and Snapdragon 400/600/800 SoCs and has architectural
similarities to ARM Cortex-A15. As for development boards IFC6400 series embedded
boards from Inforce Computing uses Snapdragon S4 Pro/APQ8064.

Approved by: stas (mentor)
2013-12-20 00:56:23 +00:00
Olivier Houchard
21dc962b93 Kill ARM_VFP_SUPPORT, it's been removed some time ago. 2013-11-21 20:39:53 +00:00
Andrew Turner
c5de72378c Rename device vfp to option VFP and retire the ARM_VFP_SUPPORT option. This
simplifies enabling as previously both options were required to be enabled,
now we only need a single option.

While here enable VFP on the PandaBoard.
2013-08-17 18:51:38 +00:00
Andrew Turner
becc01ef96 Remove the ARMFPE option. It is unsupported, and appears to be broken as
arm_fpe_core_changecontext is not a function.
2013-08-17 15:09:14 +00:00
Grzegorz Bernacki
4442f74b81 Port the new PV entry allocator from amd64/i386/mips to armv6/v7.
PV entries are now roughly half the size.
Instead of using a shared UMA zone for 28 byte pv entries
(two 8-byte tailq nodes, a 4 byte pointer, a 4 byte address and 4 byte
flags), we allocate a page at a time per process.
This provides 252 pv entries per process (actually, per pmap address space)
and eliminates one of the 8-byte tailq entries since we now can track
per-process pv entries implicitly.
The pointer to the pmap can be eliminated by doing address arithmetic to
find the metadata on the page headers to find a single pointer shared by
all 252 entries. There is an 8-int bitmap for the freelist of those 252
entries.
When in serious low memory condition, allocation of another pv_chunk is
possible by freeing some pages in pmap_pv_reclaim().

Added pv_entry/pv_chunk related statistics to pmap.
pv_entry/pv_chunk statistics can be accessed via sysctl vm.pmap.

Ported PTE freelist of KVA allocation and maintenance from i386.
Using an idea from Stephan Uphoff, use the empty pte's that correspond
to the unused kva in the pv memory block to thread a freelist through.
This allows us to free pages that used to be used for pv entry chunks
since we can now track holes in the kva memory block.

As both ARM pmap.c and pmap-v6.c use the same header and pv_entry, pmap and
md_page structures are different, it was needed to separate code designed
for ARMv6/7 from the one for other ARMs.

Submitted by:	Zbigniew Bodek <zbb@semihalf.com>
Reviewed by:	alc
Sponsored by:	The FreeBSD Foundation, Semihalf
2013-05-14 09:47:58 +00:00
Oleksandr Tymoshenko
c5f8f8946c Replace generic ARM11 option with more specific
support for ARM1136 and ARM1176

Submitted by:	Daisuke Aoyama <aoyama at peach.ne.jp>
Obtained from:	NetBSD
2012-12-20 04:32:02 +00:00
Oleksandr Tymoshenko
e1f04cd024 Piggyback MIPS changes and add ARM syscons support for devices with
framebuffer

While here - sort #if defined() order alphabetically
2012-08-25 23:59:31 +00:00
Oleksandr Tymoshenko
cf1a573f04 Merging projects/armv6, part 1
Cummulative patch of changes that are not vendor-specific:
	- ARMv6 and ARMv7 architecture support
	- ARM SMP support
	- VFP/Neon support
	- ARM Generic Interrupt Controller driver
	- Simplification of startup code for all platforms
2012-08-15 03:03:03 +00:00
Warner Losh
8304b99a75 Create a generic way to support multiple boards within an
arm platform.  Add all the atmel boards to the ATMEL kernel for
testing purposes.  Until boot loader arg parsing of baord type
is done, this won't actually be able to do the runtime selection.
2012-07-07 05:02:39 +00:00
Warner Losh
d56a9edddb These options are unused, and can safely be retired. 2012-06-15 08:01:16 +00:00
Warner Losh
38ac33aa84 Add support for parsing Linux ATAGs such as you'd see from uboot or
redboot.  Support is very preiminary and likely needs some work. Also,
do some minor code shuffling of the FreeBSD /boot/loader metadata
parsing code.  This code is preliminary and should be used with
caution.
2012-06-14 04:16:16 +00:00
Warner Losh
0bb13a26f0 Create default_parse_boot_param which, if FreeBSD /boot/loader support
is enabled, sets values based on the metadata passed in.  Otherwise
fake_preload_metadata is called.  Change the default parse_boot_param
to default_parse_boot_param.  Enable this functionality only on the mv
platform, which is where most of the code is from.

Reviewed by:	cognet, Ian Lapore
2012-06-14 04:09:20 +00:00
Warner Losh
537cdfaff1 Eliminate the now-unused AT91C_MASTER_CLOCK option and change the one
place in the source it was used to the more correct AT91C_MAIN_CLOCK.
Sort AT91C_MAIN_CLOCK into a better location in the options.arm file.
2012-06-04 04:24:59 +00:00
Stanislav Sedov
208cf1fbc3 - Add new ARM kernel option QEMU_WORKAROUNDS which can be
used in the code which needs to implement some specific
  behaviour when being run under QEMU.
- Make PXA UART probe code to work under QEMU gumstix, which
  doesn't emulate all the ports properly.
2012-04-07 23:47:08 +00:00
Olivier Houchard
4c53de5c4a Add options I missed in the additionnal AT91 support commits.
Submitted by:	Greg Ansley
2010-10-07 09:30:35 +00:00
Rafal Jaworowski
294e2f046a Now that we are fully FDT-driven on MRVL platforms, remove PHYSMEM_SIZE option. 2010-07-19 19:19:33 +00:00
Rafal Jaworowski
db5ef4fc77 Convert Marvell ARM platforms to FDT convention.
The following systems are involved:

  - DB-88F5182
  - DB-88F5281
  - DB-88F6281
  - DB-78100
  - SheevaPlug

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Marvell ARM SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - Since the common FDT infrastrucutre (fdtbus, simplebus) is used we say
    good by to obio / mbus drivers and numerous hard-coded config data.

Note that world needs to be built WITH_FDT for the affected platforms.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation.
2010-06-13 13:28:53 +00:00
Kevin Lo
64c68f1c50 Add support for FA626TE.
Tested on GM8181 development board.
2010-05-04 10:14:05 +00:00
Rui Paulo
381a19cce0 Add support for Cavium Econa CNS11XX ARM boards. These boards were
previously know by StarSemi STR9104.

Tested by the submitter on an Emprex NSD-100 board.

Submitted by:	Yohanes Nugroho <yohanes at gmail.com>
Reviewed by:	freebsd-arm, stas
Obtained from:	//depot/projects/str91xx/...
2010-01-04 03:35:45 +00:00
Rafal Jaworowski
18159f6a49 Introduce MII_ADDR_BASE option on ARM, which allows to override the default
per platform requirements.

Notes:
- Only used by mge(4) at the moment.

- This is very simplified approach and should be replaced by some long-term
  solution for managing the board/platform configuration (among others the
  MAC-PHY binding info).

Submitted by:	Michal Hajduk
Obtained from:	Semihalf
2009-08-25 09:47:12 +00:00
Sam Leffler
0ad2baa062 add IXP4XX_FLASH_SIZE config knob that can be used to override the default
flash size; this is necessary at the moment because we map all of flash at
boot, eventually we'll do this on the fly
2009-03-10 21:49:22 +00:00
Sam Leffler
d212022417 Merge WIP from p4:
o recognize ixp435 cpu
o change memory layout for for ixp4xx to not assume memory is aliases
  to 0x10000000 (Cambria/ixp435 memory starts at zero)
o handle 64 irqs for ixp435
o dual EHCI USB 2.0 controller integral to ixp435
o overhaul NPE code for ixp435 and better MAC+MII naming
o updated NPE firmware (including NPE-A image for ixp435/ixp465)
o Gateworks Cambria board support:
  - IDE compact flash
  - MCU
  - front panel LED on i2c bus
  - Octal LED latch

Sanity-tested with NFS-root on Avila and Cambria boards.  Requires
pending boot2 mods for CF-boot on Cambria.
2008-12-13 01:21:37 +00:00
Stanislav Sedov
b739b60532 - Obtain main clock frequency dynamically based on CKGR_MCFR register
contents.
- It is possible to override the dynamic configuration by using
  AT91C_MAIN_CLOCK option in kernel config.

PR:		arm/128961 (based on)
Submitted by:	Bjorn Konig <bkoenig@alpha-tierchen.de>
Reviewed by:	imp
Approved by:	kib (mentor, implicit)
2008-11-30 22:33:03 +00:00
Rafal Jaworowski
373bbe25ff Introduce basic support for Marvell families of system-on-chip ARM devices:
*  Orion
     - 88F5181
     - 88F5182
     - 88F5281

  * Kirkwood
     - 88F6281

  * Discovery
     - MV78100

The above families of SOCs are built around CPU cores compliant with ARMv5TE
instruction set architecture definition. They share a number of integrated
peripherals. This commit brings support for the following basic elements:

  * GPIO
  * Interrupt controller
  * L1, L2 cache
  * Timers, watchdog, RTC
  * TWSI (I2C)
  * UART

Other peripherals drivers will be introduced separately.

Reviewed by:	imp, marcel, stass (Thanks guys!)
Obtained from:	Marvell, Semihalf
2008-10-13 20:07:13 +00:00
Benno Rice
9722a61504 Support for the XScale PXA255 SoC as found on the Gumstix Basix and Connex
boards.  This is enough to net-boot to multiuser.

Also supported is the SMSC LAN91C111 parts used on the netCF, netDUO and netMMC
add-on boards.

I'll be putting some instructions on how to boot this on the Gumstix boards
online soon.

This is still fairly rough and will be refined over time but I felt it was
better to get this out there where other people can help out.
2008-06-06 05:08:09 +00:00
Kevin Lo
3d2c85cf9a Add CPU_ARM9E 2007-10-31 07:28:45 +00:00
Olivier Houchard
ed0b604f1f Add an option to be able to override the value of the AT91 master clock
frequency. It'd be better to be able to calculate it at runtime, but we need
the information very early, to setup the uart.
2007-10-25 23:02:42 +00:00
Olivier Houchard
128b3d77e8 Add CPU_XSCALE_81342 before I forget again. 2007-06-11 21:31:13 +00:00
Olivier Houchard
f59ae8e84a Add two new options, FLASHADDR, which defines the address the flash is
mapped at, and LOADERRAMADDR, the address at which the loader maps the ram at
at the time the kernel is booted.
They are used to detect if the kernel is booted from the onboard flash.
Define those for the IQ31244
2007-02-19 01:03:08 +00:00
Bernd Walter
ecfa9e8ded MFp4: add BWCT kernel configuration 2007-01-05 02:08:35 +00:00
Sam Leffler
5186f9ffb9 add CPU_XSCALE_IXP425
Reviewed by:	cognet, imp
MFC after:	1 month
2006-11-19 23:56:44 +00:00
Olivier Houchard
11d1528ce0 Finally bring it support for the i80219 XScale processor.
Submitted by:	Max M. Boyarov <m.boyarov bsd by>
2006-08-24 23:51:28 +00:00
Olivier Houchard
49953e11d7 Rewrite ARM_USE_SMALL_ALLOC so that instead of the current behavior, it maps
whole the physical memory, cached, using 1MB section mappings. This reduces
the address space available for user processes a bit, but given the amount of
memory a typical arm machine has, it is not (yet) a big issue.
It then provides a uma_small_alloc() that works as it does for architectures
which have a direct mapping.
2006-08-08 20:59:38 +00:00
Warner Losh
cbc25facdf For the moment, make board configuration a compile time option. This
saves space in the final kernel, but at the expense of flexibility to
boot the same kernel accross a family of boards.
2006-07-14 21:59:54 +00:00
Olivier Houchard
d661dc8070 Convert the last offender, the SA1110 port, to ARM32_NEW_VM_LAYOUT, and
completely nuke the !ARM32_NEW_VM_LAYOUT case.
2006-06-06 21:06:57 +00:00
Olivier Houchard
f14c3a8aac Make VERBOSE_INIT_ARM compile by fixing various printf formats, and add it
as an option.

Submitted by:   Max N. Boyarov <m.boyarov at bsd dot by>
2006-06-06 01:14:12 +00:00
Olivier Houchard
d5d776c16b Resurrect Skyeye support :
Add a new option, SKYEYE_WORKAROUNDS, which as the name suggests adds
workarounds for things skyeye doesn't simulate. Specifically :
- Use USART0 instead of DBGU as the console, make it not use DMA, and           manually provoke an interrupt when we're done in the transmit function.
- Skyeye maintains an internal counter for clock, but apparently there's
no way to access it, so hack the timecounter code to return a value which
is increased at every clock interrupts. This is gross, but I didn't find a
better way to implement timecounters without hacking Skyeye to get the
counter value.
- Force the write-back of PTEs once we're done writing them, even if they
are supposed to be write-through. I don't know why I have to do that.
2006-05-13 23:41:16 +00:00
Olivier Houchard
1ac232117c Add a new option, XSCALE_DISABLE_CCNT, to not use the xscale ccnt as a
timecounter (because gxemul doesn't emule it yet).
2006-04-06 17:11:08 +00:00
Olivier Houchard
527962c8c7 The IQ80321 clock is 200MHz, but the IQ80321 is 198MHz, so add a kernel option
to override the frequency
2005-12-09 23:52:51 +00:00