Several important base system components are written in C++, and the
WITHOUT_CXX option produced a system that was not fully functional.
Just accept this, and remove the option to build without C++ support.
This reverts commit adc3c128c6.
Reviewed by: brooks, kevans, jhb (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33108
It was renamed during review of D1776 but this entry slipped through.
PR: 243284
Reported by: pprocacci@gmail.com
Obtained from: Chad Jacob Milios <milios@ccsys.com>
This reverts commit 2c24ad3377.
This change causes some commands to fail, for example when working with
renamed interfaces or when trying to list a nonexistent interface by
name.
PR: 269042
Reported by: dbaio, Michael Paepcke <bugs.fbsd@paepcke.de>
MFC with: 2c24ad3377
The mntopts(3) functions support operations associated with a mount
point. The main purpose of this commit is to document the mntopts(3)
functions that now appear in 18 utilities in the base system. See
mntopts(3) for the documentation details.
The getmntopts() function appeared in 4.4BSD. The build_iovec(),
build_iovec_argf(), free_iovec(), checkpath(), and rmslashes()
functions were added with nmount(8) in FreeBSD 5.0. The getmntpoint()
and chkdoreload() functions are being added in this commit.
These functions should be in a library but for historic reasons are
in a file in the sources for the mount(8) program. Thus, to access
them the following lines need to be added to the Makefile of the
program wanting to use them:
SRCS+= getmntopts.c
MOUNT= ${SRCTOP}/sbin/mount
CFLAGS+= -I${MOUNT}
.PATH: ${MOUNT}
Once these changes have been MFC'ed to 13 they may be made into
a library.
Reviewed by: kib, gbe
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37907
If "ifconfig create" tries to load a kernel module, and the module
exists but can't be loaded, fail the command with a useful error
message. This is helpful, for example, when trying to create a cloned
interface in a vnet jail. But ignore ENOENT, because sometimes ifconfig
can't correctly guess the name of the required kernel module.
MFC after: 2 weeks
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D37873
* Appease mandoc -T lint and igor
* Use example.com for documentation
* Update the IPv4 TTL section.
Update the IPv4 TTL section specifically for FreeBSD.
FreeBSD changed the default TTL to 64 in
5639e86bdd. NetBSD and OpenBSD still
use 255. Remove some references of extinct operating systems.
Reviewed by: gbe (manpages), asomers
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd-src/pull/630
Also add a test to ensure that it is working correctly.
Submitted by: ota_j.email.ne.jp
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D34012
My main use-case for this is to support mounting config files and secrets
into OCI containers. My current workaround copies the files into the
container which is messy and risks secrets leaking into container images
if the cleanup fails.
Reviewed by: mjg, kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D37478
And the related sconfig utility. Sync serial (e.g. E1/T1) interfaces
are obsolete, and nobody responded to several inquires on the mailing
lists about use of these drivers.
Relnotes: Yes
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23928
And note that it is deprecated.
PR: 236569
Reported by: bcran
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37678
Changing the mode bits on a file with an NFS4 ACL results in the
NFS4 ACL being replaced by one matching the new mode bits being set,
so when restoring a file with an NFS4 ACL, set the owner/group/mode first
and then set the NFS4 ACL, so that setting the mode does not throw away
the ACL that we just set.
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D37618
One year ago, I deprecated 'kern' in favor of 'kernel' for the system
name for some power events. I'm about to remove it from the kernel, but
realized there's been no warning generated for users. Preserve POLA by
converting on the fly here and issuing a warning for 14.x, and an fatal
error after we branch 15. Make compiling it an error on 16 to remove
the gross hack after we branch.
Sponsored by: Netflix
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D37584
The new "kernel" system name is the one that's documented and has
been generated for a year now. Remove the old one now that 14.0
is getting close.
Sponsored by: Netflix
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D37582
Ping reads raw IP packets to parse ICMP responses. When reading the
IP Header Len (IHL) ping was was taking the value from the provided
packet without any validation. This could lead to remotely triggerable
stack corruption.
Validate the IHL against expected and recieved data sizes when reading
from the received packet and when reading any quoted packets from within
the ICMP response.
Approved by: so
Reviewed by: markj, asomers
Security: FreeBSD-SA-22:15.ping
Security: CVE-2022-23093
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #77
Differential Revision: https://reviews.freebsd.org/D37195
We removed the code for these modes back in 2015, but converted such
configurations to 'scrub fragment reassemble'. It's been long enough,
drop the backwards compatibility glue too.
Reviewed by: mjg
MFC after: never
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D37460
scrub rules have defaulted to handling fragments for a long time, but
since we removed "fragment crop" and "fragment drop-ovl" in 64b3b4d611
this has become less obvious and more expensive ("reassemble" being the
more expensive option, even if it's the one the vast majority of users
should be using).
Extend the 'scrub' syntax to allow fragment reassembly to be disabled,
while retaining the other scrub behaviour (e.g. TTL changes, random-id,
..) using 'scrub fragment no reassemble'.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D37459
Running "dnctl" vs "/sbin/dnctl" gave different results, because we
looked at the entire argv[0] string, rather than the basename.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D37431
Commit 5e6a2d6eb2 moved libc++ from /usr/lib to /lib, so we no longer
have an interval during boot when it is not available (before /usr is
mounted). We no longer need to force devd to be statically linked.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37409
Current sequence of IEEE OUI Identifier output is wrong.
For Intel, current output is e4 d2 5c, specification is 5CD2E4h
For Samsung, current output is 38 25 00, specification is 002538h
also check with Linux nvme-cli.
Reviewed by: imp, chuck
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D33856
The Number of Firmware Slots should never be zero. So, a Firmware Slot 1
should always exist. For that reason, always print the Number of
Firmware Slots and the Firmware Slot 1 Read-Only value.
Reviewed by: imp
Approved by: manu (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34700
Else out-of-bound reads and undefined behaviour may happen.
The current code only checked for the presence of the first of four bytes.
Make sure the fields in question have the minium size required.
No functional change intended.
Reviewed by: rrs@
MFC after: 1 week
Sponsored by: NVIDIA Networking
All the needed infrastructure updates have been made to allow
snapshots to be taken on UFS/FFS filesystems that are using journaled
soft updates. The most immediate benefit is the ability to use a
snapshot to take a consistent filesystem dump on a live filesystem
using the -L option to dump(8).
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36491
Although intel's specification did not tell which unit for Temperature
Statistics (Log Identifier C5h), I believe it is based on Celsius
instead of Kelvin.
here is my P3700 SSDs result(before):
Intel Temperature Log
=====================
Current: 30 K, -243.15 C, -405.67 F
Overtemp Last Flags 0
Overtemp Lifetime Flags 0
Max Temperature 53 K, -220.15 C, -364.27 F
Min Temperature 17 K, -256.15 C, -429.07 F
Max Operating Temperature 63 K, -210.15 C, -346.27 F
Min Operating Temperature 0 K, -273.15 C, -459.67 F
Estimated Temperature Offset: 0 C/K
after apply the patch, result is
Intel Temperature Log
=====================
Current: 303.15 K, 30 C, 86.00 F
Overtemp Last Flags 0
Overtemp Lifetime Flags 0
Max Temperature 326.15 K, 53 C, 127.40 F
Min Temperature 290.15 K, 17 C, 62.60 F
Max Operating Temperature 336.15 K, 63 C, 145.40 F
Min Operating Temperature 273.15 K, 0 C, 32.00 F
Estimated Temperature Offset: 0 C/K
I also compare to smartctl's report. it match very well.
also tested on Intel P3600, it fixed the problem.
Signed-off-by: Wanpeng Qian <wanpengqian@gmail.com>
Reviewed by: imp (added tweak to samsung.c so it still compiles)
Differential Revision: https://reviews.freebsd.org/D32845
Work is ongoing to add support for pfsync over IPv6. This required some
changes to allow for differentiating between the two families in a more
generic way.
This patch converts the relevant ioctls to using nvlists, making future
extensions (such as supporting IPv6 addresses) easier.
Sponsored by: InnoGames GmbH
Differential Revision: https://reviews.freebsd.org/D36277
The kernel handles the managment of UFS/FFS snapshots. Since UFS/FFS
updates filesystem data (rather than always writing changes to new
locations like ZFS), the kernel must check every filesystem write
to see if the block being written is part of a snapshot. If it is
part of a snapshot, then the kernel must make a copy of the old
block value into a newly allocated block for the snapshot before
allowing the write to be done. Similarly, if a block is being freed,
the kernel must check to see if it is part of a snapshot and let
the snapshot claim the block rather than freeing it for future use.
When a snapshot is freed, its blocks need to be offered to older
snapshots and freed only if no older snapshots wish to claim them.
When snapshots were added to UFS/FFS they were integrated into soft
updates and just a small part of the management of snapshots needed
to be added to fsck_ffs(8) as soft updates minimized the set of
snapshot changes that might need correction. When journaling was
added to soft updates a much more complete knowledge of snapshots
needed to be added to fsck_ffs(8) for it to be able to properly
handle the filesystem changes that a journal rollback needs to do
(specifically the freeing and allocation of blocks). Since this
functionality was unavailable, the use of snapshots was disabled
when running with journaled soft updates.
This set of changes imports the kernel code for the management of
snapshots to fsck_ffs(8). With this code in place it will become
possible to enable snapshots when running with journalled soft
updates. The most immediate benefit will be the ability to use
snapshots to take consistent filesystem dumps on live filesystems.
Future work will be done to update fsck_ffs(8) to be able to use
snapshots to run in background on live filesystems running with
journaled soft updates.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36491
In order to use the shutdown command, the user must
have root privileges or be a member of the operator group.
PR: 266525
Reported by: Zsolt Udvari <uzsolt at uzsolt hu>
Reviewed by: pauamma
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36688
If no IPv4-host, IPv4-mcast-group or IPv6-host is passed, it will
display the usage. The tests are passing because they are just checking
that the exit code is 1.
Fix the tests by checking the appropriate output message.
While here, change the description to match the output and add the
missing requirements.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D37250
Allow pf (l2) to be used to redirect ethernet packets to a different
interface.
The intended use case is to send 802.1x challenges out to a side
interface, to enable AT&T links to function with pfSense as a gateway,
rather than the AT&T provided hardware.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D37193
There are known issues with unionfs, and the mount_unionfs man page has
a cautionary statement about its use. The caution had additional
"humourous" statements like "BEWARE OF DOG" but they served only to
confuse the situation. Remove them.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
When syncookies are in adaptive mode they may be active or inactive.
Expose this status to users.
Suggested by: Guido van Rooij
Sponsored by: Rubicon Communications, LLC ("Netgate")
devmatch is useful on standalone machine but not on jails.
Put devinfo(8) and libdevinfo there too.
Differential Revision: https://reviews.freebsd.org/D36229
It's not really useful in a jail or in a mdroot or even if a users
wants to do a full zfs machine.
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D36227
It is useful to have zfs utilities and lib in a separate package as
it allow users to create image that can support ZFS (i.e. not with
WITHOUT_ZFS in src.conf set) without bloating the default image with
all zfs tools (for example for jails).
Differential Revision: https://reviews.freebsd.org/D36225
For most users it's not needed to boot and they are also
available in the FreeBSD-rescue package in case an update
break and FreeBSD-geom package isn't updated correctly.
Differential Revision: https://reviews.freebsd.org/D36224
It doesn't really make sense to have it in runtime and let's not
bloat utilities more.
Reviewed by: emaste, imp
Differential Revision: https://reviews.freebsd.org/D36222
It doesn't really make sense to have it in runtime and let's not
bloat utilities more.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D36221
The size of the journaled soft-updates journal should be big enough
to hold two minutes of filesystem metadata-update activity. The
maximum size of the soft updates journal was set in the 1990s. At
the time it was assummed that disk arrays would top out at 16 drives
and disk writes per drive would top out at 500 per second. Today's
I/O subsystems are considerably bigger and faster than those limits.
Thus this delta removes the hard upper limit and lets tunefs(8) and
newfs(8) set the upper bound based on the size of the filesystem and
its cylinder groups.
Sponsored by: The FreeBSD Foundation
Add a descrition to the newfs(8) -j (journal enablement) flag
that explains what soft updates journaling does, the tradeoffs
to using it, and the limitations that it imposes. Copied from
the description in tunefs(8).
PR: 261944
Sponsored by: The FreeBSD Foundation
On systems where mac_veriexec is enforced, init should run its scripts in verified mode.
This relies on the verify shell option introduced by D30464. init will detect if the shell
is /bin/sh, and in which case, add the verify option to the argument vector.
The verify option propagates to all files sourced by the shell, ensuring a better
protection than if the script was tested against an open(O_VERIFY) before running it.
This security can be bypassed with the kenv which overloads the shell to use.
However we feel confident that on systems running with mac_veriexec, this kenv will be blocked somehow.
Also, the verify option has no effect on systems where mac_veriexec is not loaded nor enforced.
Differential revision: https://reviews.freebsd.org/D34622
Reviewed by: sjg, wma
Use uintmax_t cast to print the size of the device for the non-humanize
case to avoid issues with 32-bit longs.
Fixes: 9c1bec9c21
Sponsored by: Netflix
Add an option of -h --human to output human readable size unit instead
of the fixed unit (MB).
Signed-off-by: Wanpeng Qian <wanpengqian@gmail.com>
Reviewed by: imp, bcr
Differential Revision: https://reviews.freebsd.org/D32957
Fix:
--- all_subdir_sbin ---
/opt/src/git-src/sbin/nvmecontrol/modules/samsung/samsung.c:149:64:
error: format specifies type 'unsigned long' but the argument has type
'uint64_t' (aka 'unsigned long long') [-Werror,-Wformat]
printf(" Read Reclaim Count : %lu\n",
le64dec(&temp->rrc));
~~~
^~~~~~~~~~~~~~~~~~~
%llu
/opt/src/git-src/sbin/nvmecontrol/modules/samsung/samsung.c:150:64:
error: forma t specifies type 'unsigned long' but the argument has type
'uint64_t' (aka 'unsigned long long') [-Werror,-Wformat]
printf(" Lifetime Uncorrectable ECC Count : %lu\n",
le64dec(&temp->lueccc));
~~~
^~~~~~~~~~~~~~~~~~~~~~
%llu
2 errors generated.
Fixes: 84e8678870
Samsung PM983 SSD has a 0xca logpage. It has more information compared
to Intel's this patch tested on PM983 M2 SSD and works as expected.
Reviewed by: imp@
Approved by: kp@
Event: Aberdeen Hackathon 2022
Differential revision: https://reviews.freebsd.org/D33749
Use time_t rather than uint32_t to represent the timestamps. That means
we have 64 bits rather than 32 on all platforms except i386, avoiding
the Y2K38 issues on most platforms.
Reviewed by: Zhenlei Huang
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36837
On certain cloud platforms (Google Cloud, Packet.net and others) the
DHCP server offers a /32 address. This makes adding the default route
fail since it is not reachable via any interface. Linux's
dhclient-script seem to usually have a special case for that and
explicitly adds an interface route to the router's address.
FreeBSD's dhclient-script already has a special case for when the router
address is the same as the leased address. Now also add one for when
it's a different address that doesn't fall in the interface's subnet.
PR: 241792
Event: Aberdeen hackathon 2022
Submitted by: sigsys@gmail.com
Reviewed by: dch, kp, bz (+1 on the idea, not reviewed), thj
MFC after: 1 week
wdc_get_dui_log_size allocates a buffer and then advances the
returned pointer. Passing this advanced pointer to free() is UB,
so save the original pointer to pass to free() instead.
Reviewed by: imp
Reported by: GCC 12 -Wfree-nonheap-object
Differential Revision: https://reviews.freebsd.org/D36827
The RFC for this finally got published and, therefore,
now has a number. This patch puts this RFC number
in the man page.
This is a content change.
MFC after: 1 week
Fixes: eec02418d8 Remove support for FDDI and token ring media types in userland utilities.
Reviewed by: brooks, gjb, imp
Approved by: brooks (src), gjb (mentor, src), imp (src)
Differential Revision: https://reviews.freebsd.org/D36668
MFC after: 3 days
When an internal or other error occurs during the listing of a pool,
return an error code when extiting ippool(8). Printing an error to
stderr without returning an error code is useless in shell scripts.
MFC after: 2 weeks
Add an ippool(8) option to dump a copy of the inm-memory ippool tables
in an ippool(5) format so that it can be reloaded using ippool -f.
MFC after: 2 weeks
Be more precise in the definition of policy directions
and policy levels.
PR: 250177
Reported by: Bram Ton <bram at cbbg dot nl>
Reviewed by: gbe, ae
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26719
Commit 33721eb991 enabled use of "nolockd" for
NFSv4 mounts. This was done primarily to allow its
use with the "intr" mount option.
This patch updates the man page for this.
This is a content change.
Reviewed by: gbe (manpages), karels
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D36462
When something was found wrong with an inode the error message
was always "UNKNOWN FILE TYPE". This error is now used only when
the file type field is wrong. Other errors have their own messages:
"BAD FILE SIZE", "NEGATIVE FILE SIZE", "BAD SPECIAL-FILE RDEV",
"INVALID DIRECT BLOCK", and "INVALID INDIRECT BLOCK".
More complete information about the inode is also provided.
Sponsored by: The FreeBSD Foundation
We have repeatedly gotten reports of unclassified SIOCIFCREATE2 errors
(usually "Device not configured"). This can happen if there is
configuration for interfaces in rc.conf which do not (yet) exist and
we try to configure. I can, e.g., provoke this by configuring wlan
interfaces with their physical interface not installed.
In order to cut support (guesswork) down print the name of the
interface to be configured with the error message.
Hopefully this will help us in the future to improve other configuration
or driver problems.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Similar to the preceding fix for layer three rules, ensure that we
recursively list wildcard anchors for ethernet rules.
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36417
Fix a couple of problems with printing of anchors, in particular recursive
printing, both of inline anchors and when requested explicitly with a '*'
in the anchor.
- Correct recursive printing of wildcard anchors (recurse into child anchors
rather than rules, which don't exist)
- Print multi-part anchor paths correctly (pr6065)
- Fix comments and prevent users from specifying multi-component names for
inline anchors.
tested by phessler
ok henning
Also fix the relevant pfctl test case to reflect the new (and now
correct) behaviour).
MFC after: 3 weeks
Obtained from: OpenBSD (mcbride, f9a568a27c740528301ca3419316c85a9fc7f1de)
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36416
Ensure that we pass the (base) anchorname to the kernel, not the '/*'
suffix.
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36415
When calling shutdown, shutdown sends a signal to init and exits. This
causes a race condition for the waitpid function. If the signal wins the
race, wpid will be set to -1 and init calls death_single. If shutdown
wins the race, wpid will be set to the pid of the shutdown process and
the requested_transition will be ignored.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36356
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
If the root directory exists but has a bad block number Pass1 will
accept it and setup an inoinfo structure for it. When Pass2 runs
and cannot read the root inode's content because of a bad (or
duplicate) block number, it removes the bad root inode and replaces
it. As part of creating the replacement root inode, it creates an
inoinfo entry for it. But Pass2 did delete the inoinfo entry that
Pass1 had set up for the root inode so ended up with two inoinfo
structures for it. The final step of Pass2 checks that all the ".."
entries are correct adding them if they are missing which resulted
in a second ".." entry being added to the root directory which
definitely did not go over well in the kernel name cache!
Reported by: Peter Holm
Sponsored by: The FreeBSD Foundation
Commit 603677334a added a sentence with a file path
in it. However, it did not use .Pa since it would leave
a space after it, where ('s) was supposed to go.
This patch rewords the sentence so that .Pa can
be used.
This is a content change.
Suggested by: mkarels
Recent problems related to NFSv4 mounts has been traced
to multiple NFSv4 clients using the same /etc/hostid
(or kern.hostuuid, if you prefer).
This patch adds a sentence to the man page noting that
clients must have unique /etc/hostid's.
This is a content change.
Reviewed by: gbe (manpages)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D36392
Like the detailed diagnostics produced when a bad superblock
is read, provide similar detailed diagnostics when bad
cylinder groups are read.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
The fsck_ffs(8) utility has two subsystems for reading and writing
inodes. The getnextinode() interface is used in Pass 1 (and Pass
1b if needed) to sequentially walk through all the inodes in the
filesystem. The ginode() interface is used to read and write
individual inodes. Pass 1 uses a mix of both interfaces. This
change ensures that ginode() returns a pointer to the inode in the
cache maintained by getnextinode() when that interface holds the
requested inode so that all modifications to the inode are made in
a single place and are all written to the disk together.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
Historically fsck_ffs(8) would only use alternate superblocks when
running in manual mode. When the standard superblock fails, it now
tries to find and use a backup superblocks even when running in `preen'
mode. If an alternate superblock is found and the filesystem is
successfully cleaned up using it, write the alternate superblock
back to the standard superblock so that the filesystem can be
subsequently mounted and used.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
The UFS filesystem expects to find '.' and '..' as the first two entries
in a directory. The kernel's UFS name cache can become quite confused
when these two entries are not present as the first two entries.
Prior to this change, when the fsck_ffs(8) utility detected that
'.' and/or '..' were missing, it would report them, but only offered
to replace them if the space at the beginning of the directory was
available. Otherwise it was left to the system administrator to
move the offending file(s) out of the way and then rerun fsck_ffs(8)
to create the '.' and '..' entries.
With this change, fsck_ffs(8) will always be able to create the '.'
and/or '..' entries. It moves any files in the way elsewhere in the
directory block. If there is no room in the directory block to which
to move them, they are placed in the lost+found directory.
Reported by: Peter Holm
Sponsored by: The FreeBSD Foundation
When either searching for backup UFS superblocks or when explicitly asked
to use one with the -b option, report the reason for failure if it cannot
be used.
Reported by: Peter Holm
Sponsored by: The FreeBSD Foundation
Add a descrition to the tunefs(8) -j (journal enablement) flag
that explains what soft updates journaling does, the tradeoffs
to using it, and the limitations that it imposes.
Requested by: Graham Perrin
PR: 261944
Sponsored by: The FreeBSD Foundation
Allocation or I/O failures in fsck_ffs(8) could cause segment
faults because of missing checks or not-yet-initialized data
structures. Correct these issues.
Reported by: Peter Holm
Sponsored by: The FreeBSD Foundation
into ffs_sbsearch() to allow use by other parts of the system.
Historically only fsck_ffs(8), the UFS filesystem checker, had code
to track down and use alternate UFS superblocks. Since fsdb(8) used
much of the fsck_ffs(8) implementation it had some ability to track
down alternate superblocks.
This change extracts the code to track down alternate superblocks
from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in
sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found
in ffs_subr.c, these functions can be used directly by the kernel
subsystems. Additionally they are exported to the UFS library,
libufs(8) so that they can be used by user-level programs. The new
functions added to libufs(8) are sbfind(3) that is an alternative
to sbread(3) and sbsearch(3) that is an alternative to sbget(3).
See their manual pages for further details.
The utilities that have been changed to search for superblocks are
dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8)
tool found in tools/diag/prtblknos searches for superblocks.
The UFS specific mount code uses the superblock search interface
when mounting the root filesystem and when the administrator doing
a mount(8) command specifies the force flag (-f). The standalone UFS
boot code (found in stand/libsa/ufs.c) uses the superblock search
code in the hope of being able to get the system up and running so
that fsck_ffs(8) can be used to get the filesystem cleaned up.
The following utilities have not been changed to search for
superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8),
dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and
glabel(8). When these utilities fail, they do report the cause of
the failure. The one exception is the tasting code used to try and
figure what a given disk contains. The tasting code will remain
silent so as not to put out a slew of messages as it trying to taste
every new mass storage device that shows up.
Reviewed by: kib
Reviewed by: Warner Losh
Tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D36053
Sponsored by: The FreeBSD Foundation
When the interface does not exist avoid passing host with special pf
modifiers to DNS resolution as they come up empty anyway.
Reviewed by: kp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35429
In 1e73fbd8b we fixed an issue with POM_STICKYADDRESS being checked in
the wrong struct.
Add a basic test case for this fix.
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
pass inet proto icmp icmp-type {unreach}
pass route-to (if0 127.0.0.1/8) sticky-address inet
The wrong struct was being tested. The parser tries to prevent
"sticky-address sticky-address" syntax but was actually cross-rule
enforcing that ICMP filter cannot be before the use of "sticky-address"
in next rule.
MFC after: 2 weeks
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D36050
The fsck_ffs(8) utility made sanity checks of critical superblock
fields by comparing the values of those fields in the standard
superblock againt the values of those fields in the last alternate
superblock. The code for validating a superblock now cover all the
checked fields as well as many more. Further the checks done are
far more comprehensive. So we now drop the alternate superblock
checks as they no longer provide value. Dropping these checks also
eliminates the need to read the alternate superblock.
Rather than trying to shoehorn flags into the requested superblock
address, create a separate flags parameter to the ffs_sbget()
function in sys/ufs/ffs/ffs_subr.c. The ffs_sbget() function is
used both in the kernel and in user-level utilities through export
to the sbget() function in the libufs(3) library (see sbget(3)
for details). The kernel uses ffs_sbget() when mounting UFS
filesystems, in the glabel(8) and gjournal(8) GEOM utilities,
and in the standalone library used when booting the system
from a UFS root filesystem.
The ffs_sbget() function reads the superblock located at the byte
offset specified by its sblockloc parameter. The value UFS_STDSB
may be specified for sblockloc to request that the standard
location for the superblock be read.
The two existing options are now flags:
UFS_NOHASHFAIL will note if the check hash is wrong but will still
return the superblock. This is used by the bootstrap code to
give the system a chance to come up so that fsck can be run to
correct the problem.
UFS_NOMSG indicates that superblock inconsistency error messages
should not be printed. It is used by programs like fsck that
want to print their own error message and programs like glabel(8)
that just want to know if a UFS filesystem exists on a partition.
One additional flag is added:
UFS_NOCSUM causes only the superblock itself to be returned, but does
not read in any auxiliary data structures like the cylinder group
summary information. It is used by clients like glabel(8) that
just want to check for possible filesystem types. Using UFS_NOCSUM
skips the superblock checks for csum data which allows superblocks
that have corrupted csum data to be read and used.
The validate_sblock() function checks that the superblock has not
been corrupted in a way that can crash or hang the system. Unless
the UFS_NOMSG flag is specified, it will print out any errors that
it finds. Prior to this commit, validate_sblock() returned as soon
as it found an inconsistency so would print at most one message.
It now does all its checks so when UFS_NOMSG has not been specified
will print out everything that it finds inconsistent.
Sponsored by: The FreeBSD Foundation
The reported problem is that some geli commands exit with a
success status when they should exit with a failed status.
The gctl_error() function is defined differently in the kernel
(in sys/geom/geom_ctl.c) versus in the geom user facilities (in
sbin/geom/misc/subr.c). In the kernel, calling gctl_error() causes
an error return to be set while in the user version it does not.
It was only by a quirk that had been added to the user geom return
processing that I "cleaned up" that the lack of the user implementaion
to set the error return showed up.
This patch adds the missing setting of the error code when calling
the user facility gctl_error().
Reported by: Jenkins
Debugging by: Alan Somers
Debugging by: Cy Schubert
Debugging by: Li-Wen Hsu
The BSD style commands (with names not ending in "sum") ignored the -c
options and the passed digest value when invoked with -q.
The man page stated that -q causes only the calculated digest to be
printed, but did not consider the case of both the -q and -c being
used in combination.
Since there is no warning that -c will be ignored when the -q option
is used, users night (and did) expect that the exit code would reflect
the matching of the calculated digest and the argument passed with -c.
This update implements and documents this expected behavior.
PR: 265461
Reported by: Dmitrij <bugs.freebsd@1fff.net>
MFC after: 2 weeks
The setvlantag() and setvlanproto() functions are used in two scenarios:
when we create a new vlan interface and when we update an existing
interface.
These are distinguished by the getvlan() at the end of the functions. If
this fails we assume that is because the interface doesn't exist (so
we're creating a new one). We only update the 'params' struct, and
expect the settings to be applied when we vlan_create().
However, if we're updating an existing interface we do not retrieve the
current settings, and can end up invalidating settings.
Fix this by using the settings we retrieved while checking which
scenario we're in.
Note that we do not address this for setvlandev(), because if_vlan does
not allow the vlan parent device to be changed without disassociating it
first (with ifconfig vlanX -vlandev).
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D35848
Only the UFS2 filesystem has support for storing information needed
to find alternate superblocks. If that information is inadvertently
left in place when building a UFS1 filesystem, fsck_ffs may stumble
across it and attempt to use it to recover the UFS1 filesystem
which can only end poorly.
During software installation, use veriexec -S to strictly
enforce certificate validity checks (notBefore, notAfter).
Otherwise ignore certificate validity period.
It is generally unacceptible for the Internet to stop working
just because someone did not upgrade their infrastructure for a decade.
Sponsored by: Juniper Networks, Inc.
Reviewed by: sebastien.bini_stormshield.eu
Differential Revision: https://reviews.freebsd.org/D35758
Generally, access to the kernel debugger is considered to be unsafe from
a security perspective since it presents an unrestricted interface to
inspect or modify the system state, including sensitive data such as
signing keys.
However, having some access to debugger functionality on production
systems may be useful in determining the cause of a panic or hang.
Therefore, it is desirable to have an optional policy which allows
limited use of ddb(4) while disabling the functionality which could
reveal system secrets.
This loadable MAC module allows for the use of some ddb(4) commands
while preventing the execution of others. The commands have been broadly
grouped into three categories:
- Those which are 'safe' and will not emit sensitive data (e.g. trace).
Generally, these commands are deterministic and don't accept
arguments.
- Those which are definitively unsafe (e.g. examine <addr>, search
<addr> <value>)
- Commands which may be safe to execute depending on the arguments
provided (e.g. show thread <addr>).
Safe commands have been flagged as such with the DB_CMD_MEMSAFE flag.
Commands requiring extra validation can provide a function to do so.
For example, 'show thread <addr>' can be used as long as addr can be
checked against the system's list of process structures.
The policy also prevents debugger backends other than ddb(4) from
executing, for example gdb(4).
Reviewed by: markj, pauamma_gundo.com (manpages)
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35371
Historically, GEOM utilities (gpart(8), gstripe(8), gmirror(8),
etc) used the gctl_error() routine to report errors. If they called
gctl_error() they would exit with EXIT_FAILURE, otherwise they would
return with EXIT_SUCCESS. If they used gctl_error() to output an
informational message, for example when run with the -v (verbose)
option, they would mistakenly exit with EXIT_FAILURE. A further
limitation of the gctl_error() function was that it could only be
called once. Messages from any additional calls to gctl_error()
would be silently discarded.
To resolve these problems a new function, gctl_msg() has been added.
It can be called multiple times to output multiple messages. It
also has an additional errno argument which should be zero if it is
an informational message or an errno value (EINVAL, EBUSY, etc) if
it is an error. When done the gctl_post_messages() function should
be called to indicate that all messages have been posted. If any
of the messages had a non-zero errno, the utility will EXIT_FAILURE.
If only informational messages (with zero errno) were posted, the
utility will EXIT_SUCCESS.
Tested by: Peter Holm
PR: 265184
MFC after: 1 week
Replace ppp(4) removed since FreeBSD 8.0-RELEASE with vlan(4).
While here, remove commented out reference to non-existing "egress"
interface group hiding since initial import of interface groups
from OpenBSD in 2006.
Jails without VNET have complete access to the ipfilter rules, NAT,
pools and logs. This is insecure. Only allow jails to manipulate
ipfilter rules, NAT tables and ippools if the jail has its own VNET.
Otherwise a jail can affect the global system.
This patch brings ipfilter in line with ipfw's support of VNET jails and
non-support of non-VNET jails.
MFC after: 1 week
If the "intr" and/or "soft" mount options are used for
NFSv4 mounts, the protocol can be broken when the
operation returns without waiting for the RPC reply.
The likelyhood of failure increases for NFSv4.1/4.2
mounts, since the session slot will be broken when
an RPC reply is not processed.
This is mentioned in the BUGS section of "man mount_nfs",
but there was no specific mention of the session slot
problem. This patch adds a sentence for this case.
PR: 260011
Reviewed by: gbe
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35693
If the "intr" and/or "soft" mount options are used for
NFSv4 mounts, the protocol can be broken when the
operation returns without waiting for the RPC reply.
The likelyhood of failure increases for NFSv4.1/4.2
mounts, since the session slot will be broken when
an RPC reply is not processed.
This is mentioned in the BUGS section of "man mount_nfs",
but more needs to be done. This patch adds code that
generates a warning message when the mount is done.
PR: 260011
Reviewed by: emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35407
Provide more robust parameter parsing in veriexec. Do a little cleanup as well.
Differential revision: https://reviews.freebsd.org/D33246
Obtained from: Semihalf
Reviewed by: sjg, sebastien.bini_stormshield.eu
When growing a UFS/FFS filesystem, the size of the summary information
may expand into additional blocks. These blocks must be removed from
fs_dsize which records the number of blocks in the filesystem that can
be used to hold filesystem data.
While here also update the fs_old_dsize and fs_old_size fields for
compatibility with kernels that were compiled before the addition
of UFS2.
Reported by: Edward Tomasz Napiera
MFC after: 1 week
Any field that starts with # is a commented out field (there as a place
holder only, the data in that place holder is completely ignored). The
previous code improperly detected this using strcmp. Instead, any field
whose names starts with '#' is ignored.
Differential Reivsion: https://reviews.freebsd.org/D34633
named(8) hasn't been in base for some time. Remove all references to it in
manual pages.
Approved by: manpages (Pau Amma)
Differential Revision: https://reviews.freebsd.org/D35586
It may happen that "adjkerntz -a" called from jailed root crontab.
In that case it spams logs with a line:
sysctl(set: "machdep.wall_cmos_clock"): Operation not permitted
Be silent in that case.
MFC after: 1 month
