I increased the WARNS, but it looks like it breaks certain architectures
with more strict alignment requirements (mips, sparc64, ia64).
Pointy hat to: me
This is necessary in order to enable NFSv4 ACL support. The
argument to nfsvno_accchk() was changed to an accmode_t and
the function nfsrv_aclaccess() was no longer needed and,
therefore, deleted.
Reviewed by: trasz
MFC after: 2 weeks
Reset the exception handler in the child to main's.
This avoids inappropriate double cleanups or shell duplication when the
exception is caught, such as 'fc' and future 'command eval' and 'command .'.
An older version of the code used a structure on the stack, instead of a
pointer to the structure. It looks like I didn't adjust the parameters
of the write(2) call, causing the first four/eight bytes of the entry to
be corrupted, instead of writing the entire entry to disk.
That is, do not do tilde expansion if any of the CTL* bytes (\201-\210), not
only CTLESC and CTLQUOTEMARK, are encountered. Such an expansion would look
up a user name with sh's internal representation.
The parser does not currently distinguish between backslashed and
unbackslashed \201-\210, so tilde expansion of user names with these bytes
in them is not so easy to fix.
so requests may bubble up to a host-PCI bridge driver.
- Distinguish between PCI and PCIe bridges in the device description
so it's a bit easier to follow what hangs off of what in the dmesg.
Unfortunately we can't also tell PCI and PCI-X apart based on the
information provided in the OFW device tree.
- Add quirk handling for the ALi M5249 found in Fire-based machines
which are used as a PCIe-PCIe bridge there. These are obviously
subtractive decoding as as they have a PCI-ISA bridge on their
secondary side (and likewise don't include the ISA I/O range in
their bridge decode) but don't indicate this via the class code.
Given that this quirk isn't likely to apply to all ALi M5249 and
I have no datasheet for these chips so I could implement a check
using the chip specific bits enabling subtractive decoding this
quirk handling is added to the MD code rather than the MI one.
Unlike TX interrupt, ST201 does not provide any mechanism to
suppress RX interrupts. ste(4) can generate more than 70k RX
interrupts under heavy RX traffics such that these excessive
interrupts make system useless to process other useful things.
Maybe this was the major reason why polling support code was
introduced to ste(4).
The STE_COUNTDOWN register provides a programmable counter that
will generate an interrupt upon its expiration. We program
STE_DMACTL register to use 3.2us clock rate to drive the counter
register. Whenever ste(4) serves RX interrupt, the driver rearm
the timer to expire after STE_IM_RX_TIMER_DEFAULT time and disables
further generation of RX interrupts. This trick seems to work well
and ste(4) generates less than 8k RX interrupts even under 64 bytes
UDP torture test. Combined with TX interrupts, the total number of
interrupts are less than 10k which looks reasonable on heavily
loaded controller.
The default RX interrupt moderation time is 150us. Users can change
the value at any time with dev.ste.%d.int_rx_mod sysctl node.
Setting it 0 effectively disables the RX interrupt moderation
feature. Now we have both TX/RX interrupt moderation code so remove
loop of interrupt handler which resulted in sub-optimal performance
as well as more register accesses.
M5229 appears to be once again fixed. If this happens to return
we probably should disable ATAPI DMA in ataacerlabs(4) instead
just like the Linux libATA does.
