struct sglist is intended for holding S/G lists of physical address
ranges, not virtual address ranges. GCC 9.x issues several warnings
due to casts between pointers and integers of different sizes as a
result (vm_paddr_t is 64-bits on i386). Instead, add a local 'struct
hv_sglist' which uses an array of 'struct iovec' to hold the S/G list
of virtual address ranges.
Differential Revision: https://reviews.freebsd.org/D31933
- After a connection has fallen back from NIC TLS to SW TLS, any
pacing rate changes should modify the inpcb send tag even though
SB_TLS_IFNET is set.
- If a connection tries to modify the pacing rate before the send
tag has been converted from plain TLS to TLS + RL, don't fail
the rate request set but let it fall through to setting the rate
on the non-TLS inpcb RL tag.
Reviewed by: gallatin, rrs, hselasky
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D34085
At the moment this is mostly a no-op but in the future there will be
in-flight encrypted data which requires software decryption. This
same setup is also needed for NIC TLS RX.
Note that this does break TOE TLS RX for AES-CBC ciphers since there
is no software fallback for AES-CBC receive. This will be resolved
one way or another before 14.0 is released.
Reviewed by: hselasky
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D34082
There are some error paths in ioctl handlers that will call
pf_krule_free() before the rule's rpool.mtx field is initialized,
causing a panic with INVARIANTS enabled.
Fix the problem by introducing pf_krule_alloc() and initializing the
mutex there. This does mean that the rule->krule and pool->kpool
conversion functions need to stop zeroing the input structure, but I
don't see a nicer way to handle this except perhaps by guarding the
mtx_destroy() with a mtx_initialized() check.
Constify some related functions while here and add a regression test
based on a syzkaller reproducer.
Reported by: syzbot+77cd12872691d219c158@syzkaller.appspotmail.com
Reviewed by: kp
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34115
Section 4.1.2.1 of the virtio spec states that the transitional PCI
device id for a scsi device is 0x1004.
Fix suggested by reporter.
PR: 259961
Reported by: me@nanaya.pro
Reviewed by: imp, jhb
Fixes: f9c005a17f ("Add bhyve virtio-scsi storage backend support.")
Differential Revision: https://reviews.freebsd.org/D34103
735748f30a changed the output of the states so that the creator id
endianness would be consistent. This means that we need to convert the
host endianness creatorid back to big-endian before we give it to the
kernel.
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
An empty database is a database which does not contain any filenames.
It should not occur in practice but maybe in the case of an error.
echo | /usr/libexec/locate.mklocatedb > empty.db; locate -d empty.db -S
Also remove once-used functions to clean up after failed insmntque1(),
which were destructor callbacks in previous life.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D34071
According to the RM it's not safe to disable a TX ring while it is busy
transmitting frames.
In order to be safe wait until the ring is empty. (cidx==pidx)
Use this opportunity to remove a set-but-unused variable.
Obtained from: Semihalf
Sponsored by: Alstom Group
According to the RM rings can hold at most ring_size - 1 descriptors at any time.
No additional logic is needed since iflib already respects this constrain.
Thanks to that the pidx == cidx situation is not ambiguous and indicates an
empty ring.
Use that to simplify the logic that calculates the amount of processed frames.
Obtained from: Semihalf
Sponsored by: Alstom Group
The NIC can IP align received packets.
It was observed that it caused some rare stalls, that required full board reset.
Disable this feature for now. It doesn't provide any significant performance
improvement anyway.
Obtained from: Semihalf
Sponsored by: Alstom Group
when the vnode is doomed after relock. The mere fact that the vnode is
doomed does not prevent us from doing UFS operations on it while it is
still belongs to UFS, which is determined by non-NULL v_data. Not
finishing some operations, e.g. not syncing the inode block only because
the vnode started reclamation, is not correct.
Add macro IS_UFS() which incapsulates the v_data != NULL, and use it
instead of VN_IS_DOOMED() for places where the operation completion is
important.
Reviewed by: markj, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34072
The lock is unneccessary since the mount point is busied, which prevents
unmount and syncer vnode deallocation. Having the vnode locked causes
innocent LoRs and complicates debugging.
Also stop starting write accounting around it. Any caller of
VOP_FSYNC() must do it already, and sync_vnode() does.
Reported and tested by: pho
Reviewed by: markj, mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34072
The buffer must not be accessed by any other thread, it is freshly
allocated. As such, LK_NOWAIT should be nop but also it prevents
recording the order between the buffer lock and any other locks we might
own in the call to getnewbuf(). In particular, if we own FFS snap lock,
it should avoid triggering false positive warning.
Reviewed by: markj, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34072
Also remove a pointer to array variable, use array address directly.
Reviewed by: markj, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34072
When using bio's created by g_clone_bio() or g_duplicate_bio()
their consumer device (the device to which their I/O requests
are sent) is listed by the geom debugging facility as [unknown].
If available, this update lists the consumer associated with
the bio's parent.
MFC after: 2 weeks
Sponsored by: Netflix
Merge commit 6b0f35931a44 from llvm git (by Jennifer Yu):
Fix signal during the call to checkOpenMPLoop.
The root problem is a null pointer is accessed during the call to
checkOpenMPLoop, because loop up bound expr is an error expression
due to error diagnostic was emit early.
To fix this, in setLCDeclAndLB, setUB and setStep instead return false,
return true when LB, UB or Step contains Error, so that the checking is
stopped in checkOpenMPLoop.
Differential Revision: https://reviews.llvm.org/D107385
Note this only fixes the assertion reported in bug 261567; some other
tweaks for port dependencies are probably still required to make it
build to completion.
PR: 261567
MFC after: 3 days
For historical reasons, the integer is stored with an offset of plus 14.
That means, for a given max path length of 1024 the valid values
are -1009 .. 1037 and not -1023 .. 1023
PR: 201243
This avoids a potentially wild reference to the mount object.
Additionally, simplify some of the checks around VV_ROOT in
unionfs_nodeget().
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D33914
All I/O requests through the taste consumers are synchronous, done
with g_read_data() and without any locks held. It makes no sense
to delegate the I/O to g_down/g_up threads.
This removes many of context switches during disk retaste.
MFC after: 2 weeks
If the NVMe Controller doesn't support Namespace Management, it should
return "Invalid Namespace or Format" when the Host request Identify
Namespace with the global NSID value.
Fixes UNH IOL 16.0 Test 9.1, Case 6
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33578
NVMe Controllers which do not support Endurance Groups must return an
error when the Endurance Group Event Aggregate Log Change Notices bit is
set in Set Features, Asynchronous Event Configuration.
Fixes UNH IOL Test 3.12, Case 8
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33577
The function which checks for a valid LBA range mistakenly named an
input value as NLB ("Number of Logical Blocks") instead of "number of
blocks". The NVMe specification defines NLB as a zero-based value (i.e.
NLB=0x0 represents 1 block, 0x1 is 2 blocks, etc.), but the passed
parameter is a 1's-based value.
Fix is to rename the variable to avoid future confusion.
While in the neighborhood, also check that the starting LBA is less than
the size of the backing storage to avoid an integer overflow.
Reviewed by: imp, allanjude, jhb
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33575
Implement basic support for the SEL field of Get Features. This returns
information about Namespace Specific features.
Fixes UNH ILO 16.0 Test 1.2, Case 13
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33574
Compliant v1.4 Controllers must report a Controller Type (CNTRLTYPE).
Also, do not advertise secure erase functionality in the Format NVM
Attributes field of the Identify Controller data structure as the
Controller does not implement secure erase.
Fixes UNH ILO Test 1.1, Case 2
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33573
This adds the ability for a guest OS to send Set / Get Feature,
Temperature Threshold commands. The implementation assumes a constant
temperature and will generate an Asynchronous Event Notification if the
specified threshold is above/below this value. Although the
specification allows 9 temperature values, this implementation only
implements the Composite Temperature.
While in the neighborhood, move the clear of the CSTS register in the
reset function after all other cleanup. This avoids a race with the
guest thinking the reset is complete (i.e. CSTS.RDY = 0) before the NVMe
emulation is actually complete with the reset.
Fixes UNH IOL 16.0 Test 1.7, cases 1, 2, and 4.
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33572
Be more conservative and only support the Features mandatory for an I/O
Controller.
Avoids a "hang" in UNH test 1.2.10 associated with Predictable Latency
Mode Configuration and Host Behavior Support features.
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33571
The NVMe emulation checked if the Asynchronous Event Request Limit
(a.k.a AERL) would be exceeded in pci_nvme_aer_add(), but this function
is only called from nvme_opc_async_event_req() which also checks for
exceeding the AERL.
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33570
Modify the Get Log Page command to parse the Log Page Offset fields to
support more recent versions of the NVMe specification.
Fixes various tests for UNH Test 1.3.*
Reviewed by: imp, allanjude
Tested by: jason@tubnor.net
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33568
