We'd likely be better served by converting these to the equivalent mem*
calls, but just kill the knob for now. The b* macros being defined get
in the way of _FORTIFY_SOURCE.
Reviewed by: imp, markj
Differential Revision: https://reviews.freebsd.org/D32235
The 3com bluetooth PC Card adapter was removed from the tree when PC
Card support was removed earlier this year. Remove stray references to
it still in the tree.
Sponsored by: Netflix
compatibility layer. When /compat is located on a ZFS other than /,
mount would fail because they were not mounted.
Solve this by moving `linux` to depend on `zfs` which mounts all ZFS
filesystems.
Differential Revision: https://reviews.freebsd.org/D31848
MFC after: 2 weeks
Using /etc/jail.{jailname}.conf is nice, however it makes /etc/ very
messy if you have many jails. This patch allows one to move these
config files out of the way into /etc/jail.conf.d/{jailname}.conf.
Note that the same caveat as /etc/jail.*.conf applies: the jail service
will not autodiscover all of these for starting 'all' jails. This is
considered future work, since the behavior matches.
Reviewed by: kevans
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D24570
5fcdc19a81 didn't fully resolve the issue. There remains a report
that an ifconfig wlan0 up by itself is insufficient. Ifconfig down
must precede it.
Reported by: Filipe da Silva Santos <contact _ shiori_com_br>
Fixes: 5fcdc19a81
MFC after: 3 days
Some installations may experience CTRL-EVENT-SCAN-FAILED when
associating to an AP. Installations that specify
ifconfig_wlan0="WPA ... up" in rc.conf do not experience
the problem whereas those which specify ifconfig_wlan0="WPA" without
the "up" will experience CTRL-EVENT-SCAN_FAILED.
However those that specify "up" in ifconfig_wlan0 will be able to
reproduce this problem by service netif stop wlan0;
service netif start wlan0. Interestingly The service netif stop/start
problem is reproducible on the older wpa 2.9 as well.
Reported by: dhw
Reported by: "Oleg V. Nauman" <oleg _ theweb_org_ua>
Reported by: Filipe da Silva Santos <contact _ shiori_com_br>
Reported by: Jakob Alvermark <jakob _ alvermark_net>
MFC after: 3 days
both telnet and telnetd aren't that useful nowadays but some
might want them.
Create a FreeBSD-telnet package so users have a choice to have
them or not.
Differential Revision: https://reviews.freebsd.org/D31791
Reviewed by: emaste
define procname or have a PID file. This might be useful for cases,
such as mounting local FS, when there is no running daemon
still some other persistent state in the system which status
can be checked.
It is still possible to have a status method before this by having
extra_commands="status", but it's not obvious and might give
an script writer some extra legwork to figure out how and why
the straight method is not working.
Reviewed by: cy
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D31614
- Fix a warning in growfs. gpart commit is supposed to be called on disk
device.
- Silence a gpart commit warning in growfs.
Submitted by: loos
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D31587
Sponsored by: Rubicon Communications, LLC ("Netgate")
Scan through the set of environment variables during initialization and
store values in the corresponding ld_env_var_desc structure, in the
single pass at init time. This does not eliminate use of getenv(3) and
unsetenv(3) completely, but provides a foundation to do that as the next
step.
Also organize the scan in a way that makes it easier to support aliases
like LD_DEBUG vs. LD_64_DEBUG.
Suggested by: arichardson
Reviewed by: arichardson, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31545
Instead of specifying the main name part of the environment variable as the
string literal, create array of the var names and access them by symbolic
index. Convert main name parts into complete names by prefixing with
ABI-specific ld_env_vars.
This way the name is not repeated, and also it can carry additional
proporties explicitly. For instance, cleanup of the environment for
the setuid image does not require retyping all names.
Reviewed by: arichardson, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31545
Jails with jails is a supported. This change allows the script to run
upon startup with a jail. Without this, jails are not automatically
started within jails.
The current lookup prefers a strong definition to a STB_WEAK definition
(similar to glibc pre-2.2 behavior) which does not conform to the ELF
specification.
The non-compliant behavior provoked https://reviews.llvm.org/D4418
which was intended to fix -shared-libasan but introduced
new problems (and caused some sanitizer tests (e.g.
test/asan/TestCases/interception_failure_test.cpp) to fail): sanitizer
interceptors are STB_GLOBAL instead of STB_WEAK, so defining a second
STB_GLOBAL interceptor can lead to a multiple definition linker error.
For example, in a -fsanitize={address,memory,...} build, libc functions
like malloc/free/strtol/... cannot be provided by user object files.
See
https://docs.freebsd.org/cgi/getmsg.cgi?fetch=16483939+0+archive/2014/freebsd-current/20140716.freebsd-current
for discussions.
This patch implements the ELF-compliant behavior when LD_DYNAMIC_WEAK is
set. STB_WEAK wrestling in symbol lookups in `Search the dynamic linker
itself` are untouched.
Reviewed by: kib
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26352
Variant I architectures use off and Variant II ones use size + off.
Define TLS_VARIANT_I/TLS_VARIANT_II symbols similarly to how libc
handles it.
Reviewed by: kib
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31539
Differential revision: https://reviews.freebsd.org/D31541
For a Variant II architecture, the TP offset of a TLS symbol is st_value -
tlsoffset + r_addend. tlsoffset is computed by either calculate_tls_offset
or calculate_first_tls_offset.
The return value of calculate_first_tls_offset is the smallest integer
satisfying res >= size and (-res) % p_align = p_vaddr % p_align
(= p_offset % p_align). (The formula is a bit contrived. The basic idea
is to subtract the minimum integer from size + align - 1 so that the result
ihas the expected remainder.)
Reviewed by: kib
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31538
Differential revision: https://reviews.freebsd.org/D31541
lld rounds up p_memsz(PT_GNU_RELRO) to satisfy common-page-size. If the
page size is smaller than common-page-size, rounding up relro_size may
incorrectly make some RW pages read-only.
GNU ld, gold, and ld.lld ensures p_vaddr+p_memsz is a multiple of
common-page-size. While max-page-size >= system the page size,
common-page-size can be smaller than the system page size.
Submitted by: MaskRay
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31498
This adds two new options WITH_ASAN/WITH_UBSAN that can be set to
enable instrumentation of all binaries with AddressSanitizer and/or
UndefinedBehaviourSanitizer. This current patch is almost sufficient
to get a complete buildworld with sanitizer instrumentation but in
order to actually build and boot a system it depends on a few more
follow-up commits.
Reviewed By: brooks, kib, markj
Differential Revision: https://reviews.freebsd.org/D31043
ZFS in 13 supports encryption, but for the use case where keys are
available in plaintext on disk there is no mechanism for automatically
loading keys on startup.
This script will, by default, look for any dataset with encryption and
keylocation prefixed with file://. It will attempt to unlock, timing
out after 10 seconds for each dataset found.
User can optionally specify explicitly which datasets to attempt to
unlock.
Also supports (optionally by force) unmounting filesystems and unloading
associated keys.
Sponsored by: Modirum
Differential Revision: https://reviews.freebsd.org/D30015
Delete code killed by SVN r13139 in 1996. Little chance that it would
still compile today.
PR: 257317
Reported by: Alan Shearer <sakison@gmail.com>
MFC after: 2 weeks
Sponsored by: Axcient
lld emits several GOT relocations referencing the null sumbol in libc.so
when compiled with -ftls-model=initial-exec. This symbol is specified
to be undefined.
We generally do not handle dynamic TLS relocations against weak,
undefined symbols, so avoid printing a warning here. This makes it
possible to compile libc.so using the initial-exec TLS model on arm64.
Reviewed by: jrtc27, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31069
devmatch rc script would announce it was loading a module multiple
times. It used kldload -n so it really wasn't loading it that many
times, but the message is confusing. Use kldstat to see if we need to
load the module before saying we do. This fixes the vast majority of the
problems. It may be possible to race devmatch with a user invocation and
devd, though quite hard. In that case we'll announce things twice, but
still only load it once. No attempt is made to fix this.
PR: 232782
MFC After: 2 weeks
Sponsored by: Netflix
We document that we did not need .ko on the module names in
devmatch_blocklist, but we really needed them. Keep the documentation
the same, but strip the .ko when we need to use the names so you can
specify either.
PR: 256240
MFC After: 2 weeks
Sponsored by: Netflix
Support loading a default pf ruleset in case of invalid pf.conf.
If no pf rules are loaded pf will pass/allow all traffic, assuming the
kernel is compiled without PF_DEFAULT_TO_DROP, as is the case in
GENERIC.
In other words: if there's a typo in the main pf_rules we would allow
all traffic. The new default rules minimise the impact of this.
If $pf_program (i.e. pfctl) fails to set $pf_fules and
$pf_fallback_rules_enable is YES we will load $pf_fallback_rules_file if
set, or $pf_fallback_rules.
$pf_fallback_rules can include multiple rules, for example to permit
traffic on a management interface.
$pf_fallback_rules_enable defaults to "NO", preserving historic behaviour.
man page changes by ceri@.
PR: 256410
Reviewed by: donner, kp
Sponsored by: semaphor.dk
Differential Revision: https://reviews.freebsd.org/D30791
devmatch loads a number of things automatically. Allow the list of
things to load to happen first in case those drivers affect what would
be loaded. Normally, this will produce the same results, but there's
some special cases that may not when drivers are loaded that report
other drivers missing, like virtio_pci.
PR: 253287
Reviewed by: imp
MFC After: 2 weeks
This prevents these tests from being compiled with ASAN since the asan
interceptors also define opendir() but matching the libc function.
Reviewed By: oshogbo, kib, markj
Differential Revision: https://reviews.freebsd.org/D31038
This is a more reliable method that accounts for existing pidfiles,
procname and interpreter settings.
Current method of obtaining the pid for oomprotect="YES"|"ALL" processes
in certain cases fails to find a unique pid.
One such case are rc.d scripts defining command as:
command="daemon"
which results in all processes started via daemon being selected and
passed to protect(1) which fails and prints usage:
$ /etc/rc.d/exampled restart
Stopping exampled.
Starting exampled.
usage: protect [-i] command
protect [-cdi] -g pgrp | -p pid
Running the same with -x reveals what happens:
+ pid='3051 4268 4390 4421 4427 4470 4588 4733 4740 4870 4949 4954 4979
5835 5866 55487 55583 56525 57643 57789 57882 58072 58167 99419'
+ /usr/bin/protect -p 3051 4268 4390 4421 4427 4470 4588 4733 4740 4870
4949 4954 4979 5835 5866 55487 55583 56525 57643 57789 57882 58072 58167
99419
usage: protect [-i] command
protect [-cdi] -g pgrp | -p pid
We have a more reliable way of obtaining pid already defined in rc.subr
and available when protect(1) needs it. We can simply `eval $_pidcmd`
which also invokes `check_process` but properly accounts for existing
pidfile, procname and interpreter settings.
With the change the pidfile is properly obtained.
Submitted by: Adam Wolk <a.wolk at fudosecurity.com>
Sponsored by: Fudo Security
Differential Revision: https://reviews.freebsd.org/D30367
The mprotect() call was failing on CheriBSD when changing rtld's relro
page permissions due to missing CHERI capability permissions on the
mprotect() argument but did not report an error since the return value
was being ignored. It should never fail on any supported FreeBSD
architecture, but checking the return value seems like a good
sanity check to me.
Reviewed By: kib, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30820
And move all the nfs related commands there.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D30754
Sponsored by: Diablotin Systems
Accept the old rc.conf variable if the new one is not present for
compatability.
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D30806
This manpage has incorrectly documented the "dialup"
keyword as "dialin" since it was first added. Correct that.
Approved by: blackend (mentor)
MFC after: 12 days
Replace the check for zero harvest_mask with new check for empty string.
This allows one to specify harvest_mask="0" that disables harversting
entropy from all but "pure" sources. Exact bit values for "pure" sources
differ for stable/12 and later branches, so it is handy to use zero.
The check for zero pre-dates introduction of "pure" non-maskable sources
Use empty string to disable altering sysctl kern.random.harvest.mask.
Note that notion of "pure" random sources is not documented in user level
manual pages yet. Still, it helps to extend battery life for hardware
with embedded "Intel Secure Key RNG" by disabling all other sources.
Note that no defaults changed and default behaviour is not affected.
Reported by: Dmitry Luhtionov
/etc/rc.d/securelevel is supposed to run /etc/rc.d/sysctl lastload
late at boot time to apply /etc/sysctl.conf settings that fail
to apply early. However, this does not work in default configuration
because of kern_securelevel_enable="NO" by default.
Add new script /etc/rc.d/sysctl lastload that starts unconditionally.
Reported by: Marek Zarychta
MFC after: 1 month
Currently ipfw has multiple components that are not parts
of GENERIC kernel like dummynet etc. They can bring in important
sysctls if enabled with rc.conf(5) and loaded with ipfw startup script
by means of "required_modules" after initial consult
with /etc/sysctl.conf at boot time. Here is an example of one
increasing limit for dummynet hold queues that defaults to 100:
net.inet.ip.dummynet.pipe_slot_limit=1000
This makes it possible to use ipfw/dummynet rules such as:
ipfw pipe 1 config bw 50Mbit/s queue 1000
Such rule is rejected unless above sysctl is applied.
Another example is a group of net.inet.ip.alias.* sysctls
created after libalias.ko loaded as dependency of ipfw_nat.
This is not a problem if corresponding code compiled in custom kernel
so sysctls exist when sysctl.conf is read early or kernel modules
loaded with a loader. This change makes it work also for GENERIC
and modules loaded by means of rc.conf(5) settings.
MFC after: 1 month
There are still references to timed(8) and timedc(8) in the base system,
which were removed in 2018.
PR: 255425
Reported by: Ceri Davies <ceri at submonkey dot net>
Reviewed by: ygy, gbe
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30232
There should be no error after startup.
PR: 255698
Reported by: Eugene M. Kim <astralblue@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Make rc.d/routing read defaultrouter_fibN and ipv6_defaultrouter_fibN, and
set it as the default gateway for FIB N, where N is from 1 to (net.fibs - 1)
This allows adding gateways for multiple FIBs in the same format as the main
gateway. (FIB 0)
Reviewed by: olivier, rgrimes, bcr (man page)
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D22706
rtld preserves its current error message around calls to user init/fini
lists, to not override original error with potential secondary errors
caused by user code recursing into rtld. After 4d9128da54,
the preservation of the string itself is not enough, the 'seen'
indicator must be preserved as well. Otherwise, since new code does not
clear string (it cannot), call to _rtld_error() from errmsg_restore()
revived whatever message was consumed last.
Change errmsg_save() to return structure recording both 'seen' indicator
and the message, if any.
PR: 255698
Reported by: Eugene M. Kim <astralblue@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
set kld_disbale=y or any value in the boot loader and that will
disable loading of the kld_list.
Differential Revision: https://reviews.freebsd.org/D26939
Once the ipfw0 interface has been created, ifconfig(8) create will
throw a warning: ifconfig: create: bad value' when trying to create it
again.
PR: 241013
Submitted by: Jose Luis Duran
Approved by: kp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30083
Previously it depended on sysctl, which itself has no dependencies,
so rcorder(8) had a bit too much flexibility when choosing when to run
it. Make sure it runs just between 'fsck' and 'root'.
Reviewed By: jmg, imp
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D29748
This removes a minor annoyance with Linux jails, where you often
want linux_mounts_enable="NO", yet you want those filesystems
available for mounting in jails; normally mount(8) would result
in kernel automatically loading the KLD, but this doesn't work
inside jails or chroots.
PR: 242955
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D29725
This improves consistency; the NETWORKING script provides both,
so there should be no functional change.
Differential Revision: https://reviews.freebsd.org/D29587
It was unused since 405c3050f1, which removed iBCS support.
This also moves the 'linux' rc script slightly earlier, which
might help in some setups. The original version of this patch
moved it even more, before 'mountcritlocal', which would fixe
mount(8) errors due to missing /dev/shm in setups with entries
for /path/to/chroot/dev/shm without the "late" flag; however,
in the end 'kldxref' turned out to depend on 'mountcritlocal'
anyway.
Reported By: pstef
Reviewed By: dchagin
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D29590
Right now, libthr does not initialize RtldLockInfo.rtli_version when calling
_rtld_thread_init(), which makes versioning the interface troublesome.
Add a workaround: if the calling object of _rtld_thread_init() exports
the "_pli_rtli_version" symbol, then consider rtli_version initialized.
Otherwise, forcibly set it to RTLI_VERSION_ONE, currently defined as
RTLI_VERSION.
Export "_pli_rtli_version" from libthr and properly initialize rtli_version.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29633
This makes it run a bit earlier in the startup, which will
be useful for the linux rc script later on.
Reviewed By: imp (earlier version)
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D29589
This eliminates some non-trivial amount of code duplication, where done.
Only x86 and mips are handled right now.
Tested by: bdragon (powerpc), mhorne (riscv)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29623
This fixes a regression in d36d681615, where the call to
__tls_get_address() was performed under rtld_bind_lock write-locked.
Instead use tls_get_addr_slow() directly, with locked = true.
Reported by: jkim, many others
Tested by: jkim, bdragon (powerpc), mhorne (riscv)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29623
This was only needed on 32-bit arm prior to ARMv6. As we only support
ARMv6 or later remove it.
Reviewed by: mannu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D29624
dl_iterate_phdr() dlpi_tls_data should provide the TLS module segment
address, and not the TLS init segment address as it does now.
Reported by: emacsray@gmail.com
PR: 254774
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
If the root file system is composed from multiple devices, wait for
devices to be ready before running zpool and dumpon rc scripts.
An example of this is if the bulk of the root file system exists on a
fast device (e.g. NVMe) but the /var directory comes from a ZFS dataset
on a slower device (e.g. SATA). In this case, it is possible that the
zpool import may run before the slower device has finished being probed,
leaving the system in an intermediate state.
Fix is to add root_hold_wait to the zpool and dumpon (which has a
similar issue) rc scripts.
PR: 242189
Reported by: osidorkin@gmail.com
Reviewed by: allanjude
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D29101
This fixes a problem where ctld(8) would refuse to start on boot
with a specific IP address to listen on configured in ctl.conf(5).
It also fixes a problem where ctld(8) would fail to start with
some network interfaces which require a sysctl.conf(5) tweak
to configure them, eg to switch them from InfiniBand to IP mode.
PR: 232397
Reported By: Mahmoud Al-Qudsi <mqudsi at neosmart.net>
Submitted By: Jeremy Faulkner <gldisater at gmail.com>
Reviewed By: mav
Differential Revision: https://reviews.freebsd.org/D29578
The new PRELOAD_FDS variable accepts a list of file descriptors
that should be loaded into the process.
This may be used to optimize a loading process - in the case when
we already have a file descriptor to the library; we don't have
to look into multiple PATH to find it.
It may also be used in capability mode to load a single additional
library without the need to open a directory that contains it.
The last use of this functionality t may be a race-free method
of loading libraries.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D29334
Previously it would try to load linux.ko instead of linux64.ko
and fail. While here, don't try to match 'linuxaout'; even if
implemented, it's the same module as `linuxelf`.
Reviewed By: emaste
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D29288
This is not ready yet for prime time
This reverts commit 763db58932.
This reverts commit f1ab799927.
This reverts commit 6e822e9957.
This reverts commit 77e1ccbee3.
Daniel reported that NFSv4 mounts were not working despite having
set "nfsv4_server_enable=YES" in /etc/rc.conf. Mountd was logging a
message that there was no /etc/exports file.
He noted that creating a /etc/exports file with a "V4:" line in it
was needed make NFSv4 mounts work.
At least one "V4:" line in one of the exports(5) file(s) is needed to
make NFSv4 mounts work. This patch fixes mountd.c so that it logs a
message indicting that there is no "V4:" line in any exports(5)
file when NFSv4 mounts are enabled.
To avoid this message being generated erroneously, /etc/rc.d/mountd
is updated to make sure vfs.nfsd.server_max_nfsvers is properly set
before mountd(8) is started.
Reported by: debdrup
PR: 253901
MFC after: 2 weeks
Parentheses added to HASZERO macro to avoid a GCC warning, and formatted
with clang-format as we have adopted these and don't consider them
'contrib' code.
Obtained from: musl (snapshot at commit 4d0a82170a25)
Reviewed by: kib (libc integration), mjg (both earlier)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17630
Fix another bug in 77e1ccbee3. $IFS
should be fully restored for its other users.
PR: 249192
Reported by: jkim
MFC after: 3 weeks
X-MFC with: 77e1ccbee3
77e1ccbee3 introduced a bug whereby
rc scripts in etc/rc.d and $local_startup failed to parse output
from called commands because IFS was set to " " instead of the
default " \t\n". This caused parsing of output that contains any
whitespace character, such as tabs and newlines, not matching just a
space to fail.
PR: 249192
MFC after: 3 weeks
X-MFC with: 77e1ccbee3
77e1ccbee3 introduced parallel execution
of rc. It separated groups with line feeds (\n) and elements within
groups using spaces. This is a natural separation due to rcorder
using spaces and lines to separate elements within groups with groups
of services separated by line feeds.
77e1ccbee3 parses the output from rcorder
by setting $IFS. However it failed to reset $IFS to default ' \t\n'
prior to calling find_local_scripts_new(), causing find_local_scripts_new()
to fail parsing $local_startup for site-specific local rc scripts, i.e.
${LOCALBASE}/etc/rc.d. This caused daemons from ports and packages such
as postfix, dovecot, nut, and others in ${LOCALBASE} not to be started.
PR: 249192
MFC after: 3 week
X-MFC with: 77e1ccbee3
- Upgrading from older FreeBSD versions can result in errors
- /var/run can be a tmpfs, and this should be handled correctly
Approved by: markj
Differential Revision: https://reviews.freebsd.org/D28843
MFC after: 2 weeks
As of ipfilter 5.1.2 the IPv4 and IPv6 rules tables have been merged.
The ipf(8) -6 option has been a NOP since then. Currently the additional
ipf -6 load statement in rc.d/ipfilter simply added the second ipfilter
rules file to the table already populated by the previous ipf command.
Plenty of time has passed since ipfilter 5.1.2 was imported. It is time to
remove the option from rc.conf and the rc script.
Differential Revision: https://reviews.freebsd.org/D28615
Fix e40787f900 to make libexec/rc/rc.d/linux retrieve the sysctl
after loading the kernel module which provides it, not before.
Reported By: jkim
Sponsored By: The FreeBSD Foundation
In /etc/rc.d/linux the mounting paths of procfs, sysfs and devfs
are hardcoded to "/compat/linux". Switching to the content of
compat.linux.emul_path sysctl would allow to switch linuxulator
to different place.
Submitted by: freebsdnewbie_freenet.de
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27807
When a library is opened via fdlopen, it has a null pointer for its path
and so _rtld_bind can crash as a result of passing the null pointer to
basename() (which passes it to strrchr(), which doesn't do a null check).
PR: 253081
Submitted by: theraven
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28442
This eliminates a lot of stat() calls that happen when lualoader renders the
menu with the default settings, and greatly speeds up rendering on my
laptop.
ftype is nil if loader/loader.efi hasn't been updated yet, falling back to
lfs.attributes() to test.
This is technically incompatible with lfs, but not in a particularly
terrible way.
Reviewed-by: cem
MFC-after: 4 days
Differential Revision: https://reviews.freebsd.org/D27542
auditd creates a pidfile so we should use it for status checks.
This also seems to speed up the frequent onestatus checks used in
tests/sys/audit.
Reviewed By: asomers
Differential Revision: https://reviews.freebsd.org/D28389
