been transferred from zio_compress_data to its caller. Therefore, passing
the 'minblocksize' down will be a no-op.
Eliminate the parameter to reduce diff against upstream.
MFC after: 2 weeks
- Make sure the tests go into the right directory. The location was
wrong so they were overwriting the bin/chown tests!
- Use the right naming scheme for the test program.
- Remove the svn:executable property from the shell script.
It is not possible to PUSH a 32-bit operand on the stack in 64-bit mode. The
default operand size for PUSH is 64-bits and the operand size override prefix
changes that to 16-bits.
vm_copy_setup() can return '1' if it encounters a fault when walking the
guest page tables. This is a guest issue and is now handled properly by
resuming the guest to handle the fault.
after an intervening call to rewinddir() is undefined, so reclaim any
pending telldir() cookies in the directory when rewinddir() is called.
CR: D459
Reviewed by: jilles
MFC after: 1 week
true on amd64 I'm not quite positive this is the "correct" solution for
this but it does seem to compile and shut up the spew of warnings when
compiling libstand for userboot.
Add two _Static_asserts() so that in the future somebody will get a compile
failure if an architecture develops that violates the assumptions of this
code. (strongly suggested by jmg)
Change commetns to indicate int types instead of long. (noted by ian in
phabric review)
Phabric: https://phabric.freebsd.org/D443
(I'm committing this on behalf of my colleagues in the Storage team
at Chelsio).
Submitted by: Sreenivasa Honnur <shonnur at chelsio dot com>
Sponsored by: Chelsio Communications.
PF_LINK, and multicast/broadcast flag should always be dropped because
the outer protocol uses unicast even when the inner address is not for
unicast. It had been broken since r236951 when gif_output() started to
use IFQ_HANDOFF().
and tmpfs object cannot shadow. In other words, tmpfs vm object is
always at the bottom of the shadow chain.
Reported and tested by: bdrewery
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
HSD131 erratum in [1]) at a considerable rate. So filter these (default),
unless logging is enabled. Unfortunately, there really is no better way to
reasonably implement suppressing these errors than to just skipping them
in mca_log(). Given that they are reported for bank 0, they'd need to be
masked in MSR_MC0_CTL. However, P6 family processors require that register
to be set to either all 0s or all 1s, disabling way more than the one error
in question when using all 0s there. Alternatively, it could be masked for
the corresponding CMCI, but that still wouldn't keep the periodic scanner
from detecting these spurious errors. Apart from that, register contents of
MSR_MC0_CTL{,2} don't seem to be publicly documented, neither in the Intel
Architectures Developer's Manual nor in the Haswell datasheets.
Note that while HSD131 actually is only about C0-stepping as of revision
014 of the Intel desktop 4th generation processor family specification
update, these corrected errors also have been observed with D0-stepping
aka "Haswell Refresh".
1: http://www.intel.de/content/dam/www/public/us/en/documents/specification-updates/4th-gen-core-family-desktop-specification-update.pdf
Reviewed by: jhb
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
involves updating the corresponding page tables followed by accesses to the
pages in question. This sequence is subject to the situation exactly described
in the "AMD64 Architecture Programmer's Manual Volume 2: System Programming"
rev. 3.23, "7.3.1 Special Coherency Considerations" [1, p. 171 f.]. Therefore,
issuing the INVLPG right after modifying the PTE bits is crucial (see also
r269050).
For the amd64 PMAP code, the order of instructions was already correct. The
above fact still is worth documenting, though.
1: http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/24593_APM_v21.pdf
Reviewed by: alc
Sponsored by: Bally Wulff Games & Entertainment GmbH
corresponding page tables followed by accesses to the pages in question.
This sequence is subject to the situation exactly described in the "AMD64
Architecture Programmer's Manual Volume 2: System Programming" rev. 3.23,
"7.3.1 Special Coherency Considerations" [1, p. 171 f.]. Therefore, issuing
the INVLPG right after modifying the PTE bits is crucial.
For pmap_copy_page(), this has been broken in r124956 and later on carried
over to pmap_copy_pages() derived from the former, while all other places
in the i386 PMAP code use the correct order of instructions in this regard.
Fixing the latter breakage solves the problem of data corruption seen with
unmapped I/O enabled when running at least bare metal on AMD R-268D APUs.
However, this might also fix similar corruption reported for virtualized
environments.
- In pmap_copy_pages(), correctly set the cache bits on the source page being
copied. This change is thought to be a NOP for the real world, though. [2]
1: http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/24593_APM_v21.pdf
Submitted by: kib [2]
Reviewed by: alc, kib
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
The faulting instruction needs to be restarted when the exception handler
is done handling the fault. bhyve now does this correctly by setting
'vmexit[vcpu].inst_length' to zero so the %rip is not advanced.
A minor complication is that the fault injection APIs are used by instruction
emulation code that is shared by vmm.ko and bhyve. Thus the argument that
refers to 'struct vm *' in kernel or 'struct vmctx *' in userspace needs to
be loosely typed as a 'void *'.
continuing to use the variables in the configuration
file, but switch XDEV= and XDEV_ARCH= to TARGET= and
TARGET_ARCH= appropriately.
Sponsored by: The FreeBSD Foundation
custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with
EBUSY if any such cluster has been handed up to the kernel but hasn't
been freed yet. This prevents a panic later when the cluster finally
needs to be freed but rxb_free is gone from the kernel.
MFC after: 1 week
for the xdev build target, which is awesome and totally works.
Reapply svn R268377 with correct name of libsupc++ here as this does
resolve one dependancy race when building the xdev target.
the xdev target builds for amd64, i386, mips, mips64 and armv6 with this commit,
must be built as root, must be built from /usr/src, must not have a /usr/obj and
places the xdev tools in /usr/$TARGET_ARCH-freebsd
the xdev target still leaves some assorted files strewn about your /usr/src when
this is done and needs to be investigated further.
Phabric: https://phabric.freebsd.org/D385
Submitted by: bsdimp
properly clustered.
Change `fixedsize' to `fixedsize = true' to satisfy newer versions of dot(1)
generating error "Warning: <stdin>: syntax error in line 27 near ','".
Remove bounding cluster surrounding various include-groupings, allowing
groups of include files to float freely to the greatest consumer (reducing
the density of rendered diagrams).
While here, change the bgcolor of include clusters from white to X11 color
`thistle' (a light purple).
Also, add the word "Subroutines" after include cluster labels.
Do not terminate the digraph definition with a semi-colon [;] after the
ending brace to satisfy newer versions of dot(1) generating error "Warning:
<stdin>: syntax error in line 940 near ';'".
MFC after: 3 days
X-MFC-to: stable/10, stable/9
Setting PSE together with PAE or in long mode just makes the PSE bit
completely ignored, so don't set it.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
-fix a condition so that fparseln() doesn't report spurious empty lines
eg after 2 comment lines, or on EOF after a single comment line
-no escape character means no escaped characters
modify the previous fix so that no pointless realloc()s are done in
the case of multiple empty continuation lines, and comment the code
to make the logics obvious
fparseln is now part of libc in NetBSD so this changes the previous
revision numbering.
Obtained from: NetBSD (CVS Rev. 1.6-1.7)
MFC after: 2 weeks
For consistency with r268985 for fputs.c, assign iov_len
first, avoiding the cast to uio_resid (int in stdio)
from degrading the value.
We currently don't support lengths higher than INT_MAX so
this change is little more than cosmetic.
MFC after: 3 days
a list of packages using the bsdconfig(8) API, providing dialog(8) based
user experience (versus plain console output were you to use pkg(8)
directly to install the same list of packages).
Remove example script `browse_packages_ftp.sh', made obsolete because
the digests.txz and packagesite.txz databases for pkg(8) are not
available via FTP (HTTP only to pkg.freebsd.org SRV hosts).
Update example script `browse_packages_http.sh', made to work with new
pkg(8) demonstrating how to generate a local package repository.
Fix a bug in `bsdconfig packages' where packages were listed twice. This
fix requires pkg(8) version 1.2.7_4 or higher.
NB: It is the introduction of pkg(8) 1.2.7_4 wherein I am also able to
drastically reduce the generation time of package dependencies prior to
the dialog display (by utilizing the new `-I' flag to pkg-rquery(8)).
While here, fix a positional argument nit for f_index_initialize() of
`packages/index.subr' include (the one and only argument is positional
argument 1 to state the by-ref handle, indicating the variable to set
in the caller's namespace; the nit I'm fixing here is that we were
querying positional argument 2 for this information incorrectly; caused
by a missing hunk back around SVN r257795).
Fix a bug in sysrc(8) described by PR bin/187458 "sysrc(8) silently and
unexpectedly bootstraps pkg". This was caused by an explicit entry in
`/usr/share/bsdconfig/common.subr' (used by sysrc(8)) that called pkg(8)
to populate the $PKG_ABI global (called in a way that allows implicit
bootstrap of pkg(8)). The solution to which was to find every place in
bsdconfig(8) that requires the $PKG_ABI global and add a layer of
protection by way of introducing the new API call f_musthavepkg_init()
(provided by new include, `/usr/share/bsdconfig/packages/musthavepkg.subr'
intented to mirror `/usr/share/bsdconfig/mustberoot.subr'). When the
$PKG_ABI global is required, you can use `f_musthavepkg_init' to cause
graceful premature termination in the event that pkg(8) has not yet been
bootstrapped, and thus cannot be used to populate $PKG_ABI.
NB: If running interactively ($nonInteractive is NULL or unset), the
f_musthavepkg_init() API call will attempt to bootstrap pkg(8), but only
if the user chooses "Yes" to a Yes/No dialog confirming it is ok to
bootstrap.
While here, simplify an if-conditional in `media/http.subr' include to
use sh(1) inline assignment-with-break.
Also, fix a bug in `media/http.subr' and `media/httpproxy.subr' wherein
the error messages for various HTTP failures were not finding their way
to the console (needed to pass stdout to pass-thru descriptor).
While here, remove the executable bit from `packages/categories.subr',
`packages/index.subr', and `packages/packages.subr' includes.
Fix issues where pkg(8) complains about PACKAGESITE being defined.
Previously, we would set $PACKAGESITE and export it. Now we only set
$PACKAGESITE for invocations of "pkg update" -- getting rid of all the
spurious warnings about PACKAGESITE being deprecated (it's still used
in the case of "pkg update" for simplicity versus having to configure
a config-file).
Remove the leading argument from invocations of f_index_initialize() in
`packages/packages.subr' include. The leading argument no longer means
what it used to, pre SVN r257995).
PR: bin/187458
Reviewed by: nwhitehorn
MFC after: 1 week
X-MFC-to: stable/10, stable/9
are no longer installed since r267486. Add them to ObsoleteFiles.inc1,
which should have been done in r267486.
PR: 192010
Submitted by: Vick Khera
Pointyhat to: gavin
MFC after: 3 days
