Fix 2.5 and 5G speeds reporting and update shared code with recent
changes:
- Update expected FW API versions for X710 and X722 adapters
- Define pointers related to Preservation Rules Module
- Add definitions for Shadow RAM pointers to new modules: 5th and 6th
FPA, and Preservation Rules Module.
- Add I40E_RX_PTYPE_PARSER_ABORTED definition, so the driver will know
opcode for parser aborted packets.
- Add the new filter types needed for custom cloud filters.
- Add support for Minimum Rollback Revision
- Fix RX_ONLY mode for unicast promiscuous on VLAN
- Add EEE LPI status check for X722 adapters
- Fix PHY type identifiers for 2.5G and 5G adapters
- Fix update link data for X722
- Increase the timeout value for PF reset to give PF more time to finish
reset if it is loaded with filters.
- Added support for Min Rollback Revision for 4 more X722 modules
- Fix reporting of Active Optical Cable media type
- Add flags and fields for double VLAN processing
- Fix potentially uninitialized variables in NVM code
Reviewed by: kbowling@, mike.jakubik@gmail.com
Tested by: gowtham.kumar.ks@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D31565
Update the iflib version of ixl driver based on the OOT version ixl-1.11.29.
Major changes:
- Extract iflib specific functions from ixl_pf_main.c to ixl_pf_iflib.c
to simplify code sharing between legacy and iflib version of driver
- Add support for most recent FW API version (1.10), which extends FW
LLDP Agent control by user to X722 devices
- Improve handling of device global reset
- Add support for the FW recovery mode
- Use virtchnl function to validate virtual channel messages instead of
using separate checks
- Fix MAC/VLAN filters accounting
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: erj@
Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D24564
Refresh upstream driver before impending conversion to iflib.
Major changes:
- Support for descriptor writeback mode (required by ixlv(4) for AVF support)
- Ability to disable firmware LLDP agent by user (PR 221530)
- Fix for TX queue hang when using TSO (PR 221919)
- Separate descriptor ring sizes for TX and RX rings
PR: 221530, 221919
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: #IntelNetworking
MFC after: 1 day
Relnotes: Yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D14985
Refresh upstream driver before impending conversion to iflib.
Major new features:
- Support for Fortville-based 25G adapters
- Support for I2C reads/writes
(To prevent getting or sending corrupt data, you should set
dev.ixl.0.debug.disable_fw_link_management=1 when using I2C
[this will disable link!], then set it to 0 when done. The driver implements
the SIOCGI2C ioctl, so ifconfig -v works for reading I2C data,
but there are read_i2c and write_i2c sysctls under the .debug sysctl tree
[the latter being useful for upper page support in QSFP+]).
- Addition of an iWARP client interface (so the future iWARP driver for
X722 devices can communicate with the base driver).
- Compiling this option in is enabled by default, with "options IXL_IW" in
GENERIC.
Differential Revision: https://reviews.freebsd.org/D9227
Reviewed by: sbruno
MFC after: 2 weeks
Sponsored by: Intel Corporation
Changes by author:
Kamil Krawczyk i40e-shared: use explicit cast from u16 to u8
Anjali Singhai Jain i40e-shared: Add a Virtchnl offload for RSS PCTYPE V2
Eric Joyner ixl: Remove HP device IDs.
Jesse Brandeburg i40e-shared: add small bit of debug
Mitch Williams i40e-shared: check for stopped admin queue
Mitch Williams i40e-shared: set aq count after memory allocation
Jesse Brandeburg i40e-shared: remove forever unused ID
Eric Joyner ixl: Fix bug where RSS does not hash to more than 16 queues.
Shannon Nelson i40e-shared: define function capabilities in only one place
Eric Joyner ixl: Change spacing, comments, and a single error message.
Eric Joyner ixl: Save admin queue phy interrupt mask as a define.
Eric Joyner ixl: Move callout_reset() to later in init_locked(), and stop clearing OACTIVE in driver flags.
Eric Joyner ixl: Add new reset+build flow to init() if it detects that the admin queue is stopped.
Eric Joyner ixl: Return EACCES instead of EPERM when an nvmupdate command fails.
Eric Joyner ixl: Remove KX_A device ID.
Differential Revision: https://reviews.freebsd.org/D6211
Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com
MFC after: 2 weeks
Sponsored by: Intel Corporation
code update, with supporting changes in the CORE. Changes for the extended
media types, VF driver has virtual channel protocol changes, and some
register use corrections. This software change should be coordinated with
Firmware updates to your hardware, contact your support channels for that.
MFC after: 1 week
- It was decided to change the driver name to if_ixl for FreeBSD
- This release adds the VF Driver to the tree, it can be built into
the kernel or as the if_ixlv module
- The VF driver is independent for the first time, this will be
desireable when full SRIOV capability is added to the OS.
- Thanks to my new coworker Eric Joyner for his superb work in
both the core and vf driver code.
Enjoy everyone!
Submitted by: jack.vogel@intel.com and eric.joyner@intel.com
MFC after: 3 days (hoping to make 10.1)