Proper TCP Cubic operation requires the knowledge
of the maximum congestion window prior to the
last congestion event.
This restores and improves a bugfix previously added
by jtl@ but subsequently removed due to a revert.
Reported by: chengc_netapp.com
Reviewed by: chengc_netapp.com, tuexen (mentor)
Approved by: tuexen (mentor), rgrimes (mentor)
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D25133
The use of t_rcvtime as proxy for the last transmission
fails for transactional IO, where the client requests
data before the server can respond with a bulk transfer.
Set aside a dedicated variable to actually track the last
locally sent segment going forward.
Reported by: rrs
Reviewed by: rrs, tuexen (mentor)
Approved by: tuexen (mentor), rgrimes (mentor)
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D25016
The ACPI Specification defines a Generic Address Structure (GAS),
which is used to describe UART controller register layout in the
SPCR table. The driver responsible for parsing it (uart_cpu_acpi)
wrongly associates the Access Size field to the uart_bas's regshft
and the register BitWidth to the regiowidth - according to
the definitions it should be opposite.
This problem remained hidden most likely because the majority of platforms
use 32-bit registers (BitWidth) which are accessed with the according
size (Dword). However on Marvell Armada 8k / Cn913x platforms,
the 32-bit registers should be accessed with Byte granulity, which
unveiled the issue.
This patch fixes above by proper values assignment and slightly improved
parsing.
Note that handling of the AccessWidth set to EFI_ACPI_6_0_UNDEFINED is
needed to work around a buggy SPCR table on EC2 x86 "bare metal" instances.
Reviewed by: manu, imp, cperciva, greg_unrelenting.technology
Obtained from: Semihalf
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25373
RB_CLEAR_NODE. But it is not an expression, and ought not to be
enclosed in parens. Remove them.
Approved by: markj
Differential Revision: https://reviews.freebsd.org/D25421
In the current iflib_netmap_rxsync, there is nothing that prevents
kring->nr_hwtail to overrun kring->nr_hwcur during the descriptor
import phase. This may cause errors in netmap applications, such as:
em1 RX0: fail 'head < kring->nr_hwcur || head > kring->nr_hwtail'
h 795 c 795 t 282 rh 795 rc 795 rt 282 hc 282 ht 282
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25252
pointers. Define RB_SWAP_CHILD to replace the child of a parent with
its twin, and use it in 4 places. Use RB_SET in rb_link_node to remove
the only linuxkpi reference to color, and then drop color- and
parent-related definitions that are defined and used only in rbtree.h.
This is intended to be entirely cosmetic, with no impact on program
behavior, and leave RB_PARENT and RB_SET_PARENT as the only ways to
read and write rb parent pointers.
Reviewed by: markj, kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25264
Ports bsd.kmod.mk explicitly sets MK_KERNEL_SYMBOLS=no to prevent auto-
splitting of debuginfo from kernel modules. If that knob is set, don't
split out a .ko.debug and .ko from .ko.full; just generate a .ko with
debuginfo and leave it be.
Otherwise, with DEBUG_FLAGS set and MK_KERNEL_SYMBOLS=no, we would helpfully
strip out the debuginfo from the .ko.full and then not install it. That is
not the desired result a WITH_DEBUG port kmod build.
Reviewed by: emaste, jhb
Differential Revision: https://reviews.freebsd.org/D24835
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).
Programmatically document, via a zfs_ioc_key_t, the valid arguments
for the ioc commands that rely on nvpair input arguments (i.e. non
legacy commands from libzfs_core). Automatically verify the expected
pairs before dispatching a command.
This initial phase focuses on the non-legacy ioctls. A follow-on
change can address the legacy ioctl input from the zfs_cmd_t.
The zfs_ioc_key_t for zfs_keys_channel_program looks like:
static const zfs_ioc_key_t zfs_keys_channel_program[] = {
{"program", DATA_TYPE_STRING, 0},
{"arg", DATA_TYPE_UNKNOWN, 0},
{"sync", DATA_TYPE_BOOLEAN_VALUE, ZK_OPTIONAL},
{"instrlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
{"memlimit", DATA_TYPE_UINT64, ZK_OPTIONAL},
};
Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE,
EBADF, and E2BIG).
ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
Reviewed by: allanjude
Obtained from: OpenZFS
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25393
Networking is broken if the driver configures its (virtual) hardware to
use a hash algorithm (or a key) different from the one that the network
stack (software RSS) uses. This can be seen with connections initiated
from the host. The PCB will be placed into the hash table based on the
hash value calculated by the software. The hardware-calculated hash
value in reponse packets will be different, so the PCB won't be found.
Tested with a kernel compiled with 'options RSS' on an instance with ena
driver.
Reviewed by: mw, adrian
MFC after: 2 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D24733
For TLS 1.2 this permits reusing one of the existing iovecs without
always having to duplicate both.
While here, only duplicate the output iovec for TLS 1.3 if it will be
used.
Reviewed by: gallatin
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25291
This permits requests to provide the AAD in a separate side buffer
instead of as a region in the crypto request input buffer. This is
useful when the main data buffer might not contain the full AAD
(e.g. for TLS or IPsec with ESN).
Unlike separate IVs which are constrained in size and stored in an
array in struct cryptop, separate AAD is provided by the caller
setting a new crp_aad pointer to the buffer. The caller must ensure
the pointer remains valid and the buffer contents static until the
request is completed (e.g. when the callback routine is invoked).
As with separate output buffers, not all drivers support this feature.
Consumers must request use of this feature via a new session flag.
To aid in driver testing, kern.crypto.cryptodev_separate_aad can be
set to force /dev/crypto requests to use a separate AAD buffer.
Discussed with: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25288
when it has passed the synchronization test.
"Processor Programming Reference (PPR) for AMD Family 17h" states that
the TSC uses a common reference for all sockets, cores and threads.
MFC after: 1 month
The assumption in zio_ddt_free() is that ddt_phys_select() must
always find a match. However, if that fails due to a damaged
DDT or some other reason the code will NULL dereference in
ddt_phys_decref().
While this should never happen it has been observed on various
platforms. The result is that unless your willing to patch the
ZFS code the pool is inaccessible. Therefore, we're choosing
to more gracefully handle this case rather than leave it fatal.
http://mail.opensolaris.org/pipermail/zfs-discuss/2012-February/050972.html5dc6af0eec
Reported by: Pierre Beyssac
Obtained from: OpenZFS
MFC after: 2 weeks
Sponsored by: Klara Inc.
This file is the only SCTP source file compiled into the kernel when
SCTP_SUPPORT is configured. sctp_delayed_checksum() references a couple
of counters defined in system_base_info, so the change allows these
counters to be referenced in a kernel compiled without "options SCTP".
Submitted by: tuexen
MFC with: r362338
When the PCI address != physical address we need to translate from the
former to the latter before passing to the parent to map into the kernels
virtual address space.
Sponsored by: Innovate UK
It's interesting that similar messages from gpiobus_acquire_pin never
had any prefix while gpiobus_release_pin messages were prefixed with
"gpiobus_acquire_pin".
Anyway, the prefix is not that useful and can be deduced from context.
MFC after: 2 weeks
The Raspbery Pi computers do not properly implement PSCI. The canonical
way to reset them is to set a watchdog timer and allow it to expire.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25268
fibX_lookup_nh_ext().
fibX_lookup_nh_ represents pre-epoch generation of fib kpi,
providing less guarantees over pointer validness and requiring
on-stack data copying.
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D24975
is used by the IPPROTO_SCTP level socket options SCTP_GET_PEER_ADDRESSES
and SCTP_GET_LOCAL_ADDRESSES, which are used by libc to implement
sctp_getladdrs() and sctp_getpaddrs().
These changes allow an old libc to work on a newer kernel.
sizeof pointer before [r354857]), we need to zero MAXVIFS times the size of
the struct. All good things come in threes; I hope this is it on this one.
PR: 246629, 206583
Reported by: kib
MFC after: ASAP
- a cloneattach failure will not currently be handled correctly,
jump to the right target
- pseudo devices are all treat as if they're ethernet devices -
this often doesn't make sense
MFC after: 1 week
Sponsored by: Netgate, Inc.
Differential Revision: https://reviews.freebsd.org/D25083
This OID was added in r17352 but the write path of IFDATA_LINKSPECIFIC
seems unused as there are no in-base writers, and as far as I can tell
we had issues with this code before, see PR 219472. Drop the write path
to make the handler read-only as described in comments and man-pages.
It can be marked as MPSAFE now.
Reviewed by: bdragon, kib, melifaro, wollman
Approved by: kib (mentor)
Sponsored by: Mysterious Code Ltd.
Differential Revision: https://reviews.freebsd.org/D25348
For software like PostgreSQL and SQLite that sometimes reads sequentially
while also writing sequentially some distance behind with interleaved
syscalls on the same fd, performance is better on UFS if we do
sequential access heuristics separately for reads and writes.
Patch originally by Andrew Gierth in 2008, updated and proposed by me with
his permission.
Reviewed by: mjg, kib, tmunro
Approved by: mjg (mentor)
Obtained from: Andrew Gierth <andrew@tao11.riddles.org.uk>
Differential Revision: https://reviews.freebsd.org/D25024
It turns out relocating the symbol table itself can cause issues, like fbt
crashing because it applies the offsets to the kernel twice.
This had been previously brought up in rS333447 when the stoffs hack was
added, but I had been unaware of this and reimplemented symtab relocation.
Instead of relocating the symbol table, keep track of the relocation base
in ddb, so the ddb symbols behave like the kernel linker-provided symbols.
This is intended to be NFC on platforms other than PowerPC, which do not
use fully relocatable kernels. (The relbase will always be 0)
* Remove the rest of the stoffs hack.
* Remove my half-baked displace_symbol_table() function.
* Extend ddb initialization to cope with having a relocation offset on the
kernel symbol table.
* Fix my kernel-as-initrd hack to work with booke64 by using a temporary
mapping to access the data.
* Fix another instance of __powerpc__ that is actually RELOCATABLE_KERNEL.
* Change the behavior or X_db_symbol_values to apply the relocation base
when updating valp, to match link_elf_symbol_values() behavior.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D25223
Without this patch, clnt_vc_soupcall() first does a soreceive() for
4 bytes (the Sun RPC over TCP record mark) and then soreceive(s) for
the RPC message.
This first soreceive() almost always results in an mbuf allocation,
since having the 4byte record mark in a separate mbuf in the socket
rcv queue is unlikely.
This is somewhat inefficient and rather odd. It also will not work
for the ktls rx, since the latter returns a TLS record for each
soreceive().
This patch replaces the above with code similar to what the server side
of the krpc does for TCP, where it does a soreceive() for as much data
as possible and then parses RPC messages out of the received data.
A new field of the TCP socket structure called ct_raw is the list of
received mbufs that the RPC message(s) are parsed from.
I think this results in cleaner code and is needed for support of
nfs-over-tls.
It also fixes the code for the case where a server sends an RPC message
in multiple RPC message fragments. Although this is allowed by RFC5531,
no extant NFS server does this. However, it is probably good to fix this
in case some future NFS server does do this.
for the IPPROTO_SCTP level socket options SCTP_BINDX_ADD_ADDR and
SCTP_BINDX_REM_ADDR. These socket option are intended for internal
use only to implement sctp_bindx().
This is one user of struct sctp_getaddresses less.
struct sctp_getaddresses is strange and will be changed shortly.
root of the too-short tree is black and at least one of the children
of that sibling is red, either one or two rotations finish the
rebalancing. In the case when both of the children are red, the
current implementation uses two rotations where only one is
necessary. This change removes that extra rotation, and in that case
also removes a needless black-to-red-to-black recoloring.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D25335
FreeBSD madvise(2) directly. While some of the flag values match,
most don't.
PR: kern/230160
Reported by: markj
Reviewed by: markj
Discussed with: brooks, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25272
Once tx mbufs have been handed to hardware, nothing serializes the tx
path against completion and potential use-after-free of the outbound
mbuf. Perform accounting and BPF tap before queueing to hardware to
avoid this race.
Submitted by: Steve Wirtz <steve_wirtz AT dell.com>
Reviewed by: markj, rstone
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D25364
