-Improvement: panic() on INVARIANTS kernels if memory allocation
fails for a tagblock in sctp_add_vtag_to_timewait().
-Bugfix: Protect code in sctp_is_in_timewait() by
SCTP_INP_INFO_WLOCK/SCTP_INP_INFO_WUNLOCK.
-Cleanup: Get rid of unused variable now in sctp_init_asoc().
-Bugfix: Reuse the correct vtag in sctp_add_vtag_to_timewait().
-Cleanup: Get rid of unused constant SCTP_TIME_WAIT_SHORT
in sctp_constants.h.
-Improvement: Use all hash buckets of the vtag hash table.
-Cleanup: Get rid of then unused constant SCTP_STACK_VTAG_HASH_SIZE_A.
-Bugfix: Handle SHUTDOWN;SACK packet correctly.
-Bugfix: Last TSN in a gap ack block was not being "ack'd"
in the internal scoreboard.
Obtained from: (with help from Michael Tuexen)
The same (vendor, product) tuple is used for aue(4) adapters,
but I am not sure if the quirk is correct. I'm using the USB
device 'release' info to skip aue(4) detection right now, but
if there's a better way to differentiate between USB-LAN and
USB Bluetooth we should update the quirk.
Reviewed by: imp, rink
MFC after: 2 weeks
controller. The controller is also known as L1E(AR8121) and
L2E(AR8113/AR8114). Unlike its predecessor Attansic L1,
AR8121/AR8113/AR8114 uses completely different Rx logic such that
it requires separate driver. Datasheet for AR81xx is not available
to open source driver writers but it shares large part of Tx and
PHY logic of L1. I still don't understand some part of register
meaning and some MAC statistics counters but the driver seems to
have no critical issues for performance and stability.
The AR81xx requires copy operation to pass received frames to upper
stack such that ale(4) consumes a lot of CPU cycles than that of
other controller. A couple of silicon bugs also adds more CPU
cycles to address the known hardware bug. However, if you have fast
CPU you can still saturate the link.
Currently ale(4) supports the following hardware features.
- MSI.
- TCP Segmentation offload.
- Hardware VLAN tag insertion/stripping with checksum offload.
- Tx TCP/UDP checksum offload and Rx IP/TCP/UDP checksum offload.
- Tx/Rx interrupt moderation.
- Hardware statistics counters.
- Jumbo frame.
- WOL.
AR81xx PCIe ethernet controllers are mainly found on ASUS EeePC or
P5Q series of ASUS motherboards. Special thanks to Jeremy Chadwick
who sent the hardware to me. Without his donation writing a driver
for AR81xx would never have been possible. Big thanks to all people
who reported feedback or tested patches.
HW donated by: koitsu
Tested by: bsam, Joao Barros <joao.barros <> gmail DOT com >
Jan Henrik Sylvester <me <> janh DOT de >
Ivan Brawley < ivan <> brawley DOT id DOT au >,
CURRENT ML
Peter Holm just discovered this funny bug inside the TTY code: if
uiomove() in ttydisc_write() returns an error, we forget to relock the
TTY before jumping out of ttydisc_write(). Fix it by placing
tty_unlock() and tty_lock() around uiomove().
Submitted by: pho
regular header tokens. The extended header tokens contain an IP
or IPv6 address which makes it possible to identify which host an
audit record came from when audit records are centralized.
If the host information has not been specified, the system will
default to the old style headers. Otherwise, audit records that
are created as a result of system calls will contain host information.
This implemented has been designed to be consistent with the Solaris
implementation. Host information is set/retrieved using the A_GETKAUDIT
and A_SETKAUDIT auditon(2) commands. These commands require that a
pointer to a auditinfo_addr_t object is passed. Currently only IP and
IPv6 address families are supported.
The users pace bits associated with this change will follow in an
openbsm import.
Reviewed by: rwatson, (sson, wsalamon (older version))
MFC after: 1 month
specification and regression test regress:25.
"A function can be preceded by one or more '!' characters, in which
case the function shall be applied if the addresses do not select
the pattern space."
MFC after: 2 weeks
"A function can be preceded by one or more '!' characters, in which
case the function shall be applied if the addresses do not select
the pattern space."
- Use `fildes[2]' instead of `*fildes' to make more clear that pipe(2)
fills an array with two descriptors.
- Remove EFAULT from the manual page. Because of the current calling
convention, pipe(2) raises a segmentation fault when an invalid
address is passed.
- Introduce kern_pipe() to make it easier for binary emulations to
implement pipe(2).
- Make Linux binary emulation use kern_pipe(), which means we don't have
to recover td_retval after calling the FreeBSD system call.
Approved by: rdivacky
Discussed on: arch
This prevents a panic which occurs when a driver attempts to load
firmware at boot via firmware_get() when the firmware module has not
been preloaded. firmware_get() will enqueue a task using a struct
taskqueue allocated on the stack, and the machine will crash much
later in the firmware taskq thread when taskqs are started and the
struct taskqueue is garbage.
Not objected to by: sam
- Do not let individual KLD module unregister firmware image loaded by ispfw
or vice versa.
- Make 'kldunload ispfw' actually unregister all firmware images loaded by
ispfw, not just 'isp_1040'.
- Print which KLD module actually loaded the firmware image.
- Remove unused return value from do_load_fw() and do_unload_fw() and remove
duplicate sys/param.h while I am here.
subtle why it comes out the way it does. Once you realize that it
depends on the archiving order, it's also important to realize that
filesystem differences aren't going to break this case. (Some of the
other tests have had to be extensively rewritten to make them
independent of the order in which a particular filesystem returns file
entries.)
(This commit also serves to note the PR number that I accidentally
omitted from the previous commit.)
PR: bin/128562
MFC after: 30 days
good job writing this test; it exercises a lot of subtle cases. The
trickiest one is that a hardlink to something that didn't get
extracted should not itself be extracted. In some sense, this is not
the desired behavior (we'd rather restore the file), but it's the best
you can do in a single-pass restore of a tar archive.
The test here should be extended to exercise cpio and newc formats as
well, since their hardlink models are different, which will lead to
different handling of some of these edge cases.
Submitted by: Jaakko Heinonen
MFC after: 30 days
dependencies. A 'struct pmc_classdep' structure describes operations
on PMCs; 'struct pmc_mdep' contains one or more 'struct pmc_classdep'
structures depending on the CPU in question.
Inside PMC class dependent code, row indices are relative to the
PMCs supported by the PMC class; MI code in "hwpmc_mod.c" translates
global row indices before invoking class dependent operations.
- Augment the OP_GETCPUINFO request with the number of PMCs present
in a PMC class.
- Move code common to Intel CPUs to file "hwpmc_intel.c".
- Move TSC handling to file "hwpmc_tsc.c".
Looking at our source code history, it seems the uname(),
getdomainname() and setdomainname() system calls got deprecated
somewhere after FreeBSD 1.1, but they have never been phased out
properly. Because we don't have a COMPAT_FREEBSD1, just use
COMPAT_FREEBSD4.
Also fix the Linuxolator to build without the setdomainname() routine by
just making it call userland_sysctl on kern.domainname. Also replace the
setdomainname()'s implementation to use this approach, because we're
duplicating code with sysctl_domainname().
I wasn't able to keep these three routines working in our
COMPAT_FREEBSD32, because that would require yet another keyword for
syscalls.master (COMPAT4+NOPROTO). Because this routine is probably
unused already, this won't be a problem in practice. If it turns out to
be a problem, we'll just restore this functionality.
Reviewed by: rdivacky, kib
parenthesized subexpression is defined. For example, the
following command line caused unexpected behavior like
segmentation fault:
% echo test | sed -e 's/test/\1/'
PR: bin/126682
MFC after: 1 week
On RELENG_6 (and probably RELENG_7) we see our syscons windows and
pseudo-terminals have the following buffer sizes:
| LINE RAW CAN OUT IHIWT ILOWT OHWT LWT COL STATE SESS PGID DISC
| ttyv0 0 0 0 7680 6720 2052 256 7 OCcl 1146 1146 term
| ttyp0 0 0 0 7680 6720 1296 256 0 OCc 82033 82033 term
These buffer sizes make no sense, because we often have much more output
than input, but I guess having higher input buffer sizes improves
guarantees of the system.
On MPSAFE TTY I just sent both the input and output buffer sizes to 7
KB, which is pretty big on a standard FreeBSD install with 8 syscons
windows and some PTY's. Reduce the baud rate to 9600 baud, which means
we now have the following buffer sizes:
| LINE INQ CAN LIN LOW OUTQ USE LOW COL SESS PGID STATE
| ttyv0 1920 0 0 192 1984 0 199 7 2401 2401 Oil
| pts/0 1920 0 0 192 1984 0 199 5631 1305 2526 Oi
This is a lot smaller, but for pseudo-devices this should be good
enough. You need to do a lot of punching to fill up a 7.5 KB input
buffer. If it turns out things don't work out this way, we'll just
switch to 19200 baud.
