Commit Graph

21 Commits

Author SHA1 Message Date
Pyun YongHyeon
fcb1bf4153 Avoid magic constant.
No functional change.
2013-07-17 01:34:25 +00:00
Pyun YongHyeon
b9a17c6ce4 o TxD ring requires 8 bytes alignment to work so change alignment
constraint to 8. Previously it may have triggered watchdog
   timeouts.
 o Check whether interrupt is ours or not.
 o Enable interrupts before attemping to transmit queued packets.
   This will slightly improve TX performance.
 o No need to clear IFF_DRV_OACTIVE in a loop. AE_FLAG_TXAVAIL is
   used to know whether there are enough available TxD ring space.
 o Added missing bus_dmamap_sync(9) in ae_rx_intr() and rearranged
   code to avoid unncessary register access.
 o Make sure to clear TxD, TxS, RxD rings in driver initialization.
   Otherwise some data in these rings could be interpreted as
   'updated' which in turn will advance internally maintained
   pointers and can trigger watchdog timeouts.

PR:	kern/180382
2013-07-17 01:24:23 +00:00
Sergey Kandaurov
4fb52be9c2 Fix the build. 2012-06-06 09:07:50 +00:00
Kevin Lo
858f9d27f0 Check the return value of pci_find_cap() 2012-06-06 02:42:30 +00:00
Pyun YongHyeon
e18783345a To send a frame, controller requires a prepended TX header and
the length of frame should be treated as multiple of 4. Actual
frame length is set in the TX header. The TX header position
should be aligned on 4 byte boundary and actual frame start
position should be aligned on 4 byte boundary as well. This means
we need 4(TX header length) + 3(frame length fixup) additional free
space in TX buffer in addition to actual frame length.
Make sure TX handler check these additional bytes.
ae_tx_avail_size() returns actual free space in TX buffer to ease
the calculation of available TX buffer space in caller. While I'm
here, replace magic number to appropriate sizeof operator to
enhance readability.

This change should fix controller lockup issue happened under
certain conditions but it still does not fix watchdog timeout. It
seems the watchdog timeout is side-effect of TxS and TxD
mismatches. The root cause of TxD/TxD mismatch is not known yet but
it looks like silicon bug. I guess driver may have to reinitialize
controller whenever it sees TxS and TxD mismatches but leave it as
it was at this moment.

PR:	kern/145918
2011-11-11 19:15:32 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
John Baldwin
3b0a4aef96 Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
Matthew D Fleming
6dc7dc9a3e sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
Commit the rest of the devices.
2011-01-12 19:53:56 +00:00
John Baldwin
32341ad63c Add a 'locked' variant of the foo_start() routine and call it directly
from interrupt handlers and watchdog routines instead of queueing a task
to call foo_start().

Reviewed by:	yongari
MFC after:	1 month
2011-01-03 18:28:30 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Pyun YongHyeon
b7dc7dd4f5 Remove unnecessary controller reinitialization.
PR:	kern/87506
2010-09-21 17:25:15 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
Gavin Atkinson
7c9fdc4d36 Don't panic on attach if we can't allocate ifp
Approved by:	ed (mentor)
MFC after:	2 weeks
2010-01-10 14:48:42 +00:00
Gavin Atkinson
f0b108cf03 Small spelling fix, "Ethetnet" -> "Ethernet"
Approved by:	ed (mentor)
MFC after:	1 week
2009-12-25 19:38:12 +00:00
Pyun YongHyeon
cb2cdeceb5 Fix multicast handling. All Atheros controllers use big-endian form
in computing multicast hash.

PR:	kern/139137
2009-09-29 23:03:16 +00:00
Poul-Henning Kamp
6778431478 Revert previous commit and add myself to the list of people who should
know better than to commit with a cat in the area.
2009-09-08 13:19:05 +00:00
Poul-Henning Kamp
b34421bf9c Add necessary include. 2009-09-08 13:16:55 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Warner Losh
850f048e58 detach doesn't return an unsinged int, but returns an int. 2009-02-04 20:35:22 +00:00
Stanislav Sedov
e4ec1e683e - Eliminate unused variable. [1]
- Check for runt frames entering the stack. [2]

Suggested by:	ganbold[1], yongari[2]
Approved by:	kib (mentor)
MFC after:	2 weeks
2008-12-06 14:23:45 +00:00
Stanislav Sedov
ba26d470bd - Add driver for Attansic L2 FastEthernet controller found on
Asus EeePC and some Asus mainboards.

Reviewed by:	yongari, rpaulo, jhb
Tested by:	many
Approved by:	kib (mentor)
MFC after:	1 week
2008-10-03 10:31:31 +00:00