This is followup to r365477.
If pre-formatted device has GPT and a partition covering
last available LBAs and the device is attached using
a bridge reducing amount of LBAs, then it could be not enough
forcing GEOM to use primary GPT. Also, we should make it possible
to recover GPT and this requires either deleting or resizing the partition.
This change enables "gpart delete" and "gpart resize" commands
on corrupted GPT with following "gpart recover".
It still does not allow modifying corrupted GPT without
preliminary setting sysctl kern.geom.part.check_integrity=0
For example:
# gpart show da0
=> 34 3906963389 da0 GPT (1.8T) [CORRUPT]
34 262144 1 ms-reserved (128M)
262178 2014 - free - (1.0M)
264192 3906764943 2 freebsd-swap (1.8T)
# gpart resize -i 2 -s 3900000000 da0
# gpart recover da0
Reported by: Alex Korchmar
MFC after: 3 days
This was originally introduced back in r360833, and subsequently reverted
because it was broken for -DNO_ROOT builds and it may not have been the
correct place for it.
While debatably this may still not be 'the correct place,' it's much cleaner
than scattering rehashes all throughout the tree. brooks has fixed the issue
with -DNO_ROOT by properly writing to the METALOG in r361397.
Do note that this is different than what was originally committed; brooks
had revisions in D24932 that made it actually use the revised unprivileged
mode and write to METALOG, along with being a little more friendly to
foreign crossbuilds and just using the certctl in-tree.
With this change, I believe we should now have a populated /etc/ssl/certs in
the VM images.
MFC after: 1 week
Both before and after job control adjustments.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26416
Orphans affect job control state, we must account for them when
changing pg_jobc.
Instead of p_pptr, use proc_realparent() to get parent relevant for
job control.
Use correct calculation of the parent for exiting process. For jobc
purposes, we must use realparent, but if it is also exiting, we should
fall to reaper, then recursively find non-exiting reaper.
Reported by: trasz
PR: 249257
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26416
Use ddb pager.
Make lines more compact.
Eliminate unneeded casts.
Print more job-control related info when reporting process group.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26416
Split TMPFS_NODE_ACCCESSED bit into dedicated byte that can be updated
atomically without locks or (locked) atomics.
tn_update_getattr() change also contains unrelated bug fix.
Reported by: lwhsu
PR: 249362
Reviewed by: markj (previous version)
Discussed with: mjg
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26451
As with .text, the aim is to ensure that executable sections are
segregated from the rest, to avoid creation of writeable and executable
mappings. Recent versions of LLVM emit a PLT in firmware modules.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26444
Recent testing of the NFS-over-TLS code found a LOR between the mutex lock
used for sessions and the sleep lock used for server side krpc socket
structures.
The code in nfsrv_checksequence() would call SVC_RELEASE() with the mutex
held. Normally this is ok, since all that happens is SVC_RELEASE()
decrements a reference count. However, if the socket has just been shut
down, SVC_RELEASE() drops the reference count to 0 and acquires a sleep
lock during destruction of the server side krpc structure.
This patch fixes the problem by moving the SVC_RELEASE() call in
nfsrv_checksequence() down a few lines to below where the mutex is released.
MFC after: 1 week
Or it could be explained as lockless (for vnode lock) reads. Reads
are performed from the node tn_obj object. Tmpfs regular vnode object
lifecycle is significantly different from the normal OBJT_VNODE: it is
alive as far as ref_count > 0.
Ensure liveness of the tmpfs VREG node and consequently v_object
inside VOP_READ_PGCACHE by referencing tmpfs node in tmpfs_open().
Provide custom tmpfs fo_close() method on file, to ensure that close
is paired with open.
Add tmpfs VOP_READ_PGCACHE that takes advantage of all tmpfs quirks.
It is quite cheap in code size sense to support page-ins for read for
tmpfs even if we do not own tmpfs vnode lock. Also, we can handle
holes in tmpfs node without additional efforts, and do not have
limitation of the transfer size.
Reviewed by: markj
Discussed with and benchmarked by: mjg (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
Avoid tmpfs mount and node locks when ref count is greater than zero,
which is the case until node is being destroyed by unlink or unmount.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
There are several negative side-effects of not calling into VOP layer
at all for page cache reads. The biggest is the missed activation of
EVFILT_READ knotes.
Also, it allows filesystem to make more fine grained decision to
refuse read from page cache.
Keep VIRF_PGREAD flag around, it is still useful for nullfs, and for
asserts.
Reviewed by: markj
Tested by: pho
Discussed with: mjg
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
The pointer to vnode is already stored into f_vnode, so f_data can be
reused. Fix all found users of f_data for DTYPE_VNODE.
Provide finit_vnode() helper to initialize file of DTYPE_VNODE type.
Reviewed by: markj (previous version)
Discussed with: freqlabs (openzfs chunk)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
From Franco:
The iflib rewrite forced the promisc flag but it was not reported
to the system. Noticed on a stock VM that went into unsolicited
promisc mode when dhclient was started during bootup.
PR: 248869
Submitted by: Franco Fichtner <franco@opnsense.org>
Reviewed by: erj@
MFC after: 3 days
This re-adds the opt_rss.h header to the driver and includes some
RSS-specific headers when RSS is defined.
PR: 249191
Submitted by: Milosz Kaniewski <milosz.kaniewski@gmail.com>
MFC after: 3 days
Due to a check that should have been an endian check being an #if 0,
the wrong checksum mask table was being used on LE, which was causing
extreme strangeness in DNS resolution -- *some* hosts would be resolvable,
but most would not.
This fixes DNS resolution.
(I am committing some parts of the LE patchset ahead of time to reduce the
amount of work I have to do while committing the main patchset.)
Sponsored by: Tag1 Consulting, Inc.
Intercept and report #UD to VM on SVM/AMD in case VM tried to execute an
SVM instruction. Otherwise, SVM allows execution of them, and instructions
operate on host physical addresses despite being executed in guest mode.
Reported by: Maxime Villard <max@m00nbsd.net>
admbug: 972
CVE: CVE-2020-7467
Reviewed by: grehan, markj
Differential revision: https://reviews.freebsd.org/D26313
This function wasn't converted to use the new locking protocol in
r333744. Make it use the PCB lock for synchronizing connection state.
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26300
unp_pcb_owned_lock2() has some sharp edges and forces callers to deal
with a bunch of cases. Simplify it:
- Rename to unp_pcb_lock_peer().
- Return the connected peer instead of forcing callers to load it
beforehand.
- Handle self-connected sockets.
- In unp_connectat(), just lock the accept socket directly. It should
not be possible for the nascent socket to participate in any other
lock orders.
- Get rid of connect_internal(). It does not provide any useful
checking anymore.
- Block in unp_connectat() when a different thread is concurrently
attempting to lock both sides of a connection. This provides simpler
semantics for callers of unp_pcb_lock_peer().
- Make unp_connectat() return EISCONN if the socket is already
connected. This fixes a race[1] when multiple threads attempt to
connect() to different addresses using the same datagram socket.
Upper layers will disconnect a connected datagram socket before
calling the protocol connect's method, but there is no synchronization
between this and protocol-layer code.
Reported by: syzkaller [1]
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26299
The allocated memory is only required for SOCK_STREAM and SOCK_SEQPACKET
sockets.
Reviewed by: kevans
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26298
In all cases, PCBs are unlocked after unp_disconnect() returns. Since
unp_disconnect() may release the last PCB reference, callers may have to
bump the refcount before the call just so that they can release them
again.
Change unp_disconnect() to release PCB locks as well as connection
references; this lets us remove several refcount manipulations. Tighten
assertions.
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26297
unp_pcb_lock_pair() seems like a better name. Also make it handle the
case where the two sockets are the same instead of making callers do it.
No functional change intended.
Reviewed by: glebius, kevans, kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26296
- Use refcount_init().
- Define an INVARIANTS-only zone destructor to assert that various
bits of PCB state aren't left dangling.
- Annotate unp_pcb_rele() with __result_use_check.
- Simplify control flow.
Reviewed by: glebius, kevans, kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26295
- Define a locking key for unpcb members.
- Rewrite some of the locking protocol description to make it less
verbose and avoid referencing some subroutines which will be renamed.
- Reorder includes.
Reviewed by: glebius, kevans, kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26294
The first issue was lack of quoting around INSTALLFLAGS, which set it
incorrectly and produced an error on -M.
The second issue was that we weren't actually doing the install in
unprivileged mode, making it effectively useless. This was designed to pass
through the proper metalog/unpriv flags to install(1), so just let it
happen.
MFC after: 3 days
(default: WITH_GH_BC) and 12-STABLE (default: WITHOUT_GH_BC).
Since the new implementation of bc and dc is optionally available in
12-STABLE, I intend to MFC these descriptions for inclusion in 12.2.
MFC after: 3 days
It's included by header pollution in most of the compile
environments. However, in the standalone envirnment, it's not
included. Go ahead and include it always since the overhead is low and
it is simpler that way.
MFC After: 3 days
- Exit with an error if no path is specified.
- Man page typo.
- Error message typo.
Reviewed by: kib
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26376
In D12421, the ability to compile stand/ in little-endian was added, with the
intention to extend loader.kboot to run in Petitboot.
However, no further work was done, as the kernel then gained self-execution
capabilities as Petitboot was taught to load FreeBSD kernels directly.
The FreeBSD installer on powerpc64 (on POWER8 and POWER9) uses
/boot/etc/kboot.conf instead of loader.
As this option does nothing but cause stand/ to be miscompiled and actively
causes confusion, remove it.
(I have a functioning petitboot loader in my local tree, however, it turned
out to be quite inconvient to use due to the current petitboot plugin design
so I put it on hold.)
Reviewed by: emaste, imp, jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26430
When we bring in geli into the boot loader, we are single threaded so
we don't have to worry about locking. We have no mutexes, and don't need
to use them, so comment it out.
MFC After: 3 days
We don't need to do the busy dance for this driver. It's handled by
destroy_dev() entirely. Since all we did was busy/unbusy in
open/close, just delete them. We therefore don't need to track closes
either.
Reviewed by: ian@
Differential Revision: https://reviews.freebsd.org/D26431
