There is no way one could possibly use this header file in combination
with C++ code. The problem is that in C11 the `noreturn' macro expands
to the `_Noreturn' function specifier, while in C++11 the `noreturn'
keyword is an attribute.
So in C11 you have to write:
noreturn void exit(int status);
While in C++11 you have to write:
[[noreturn]] void exit(int status);
It is impossible to #define noreturn for C++ in such a way that it
allows both conventions.
By intentionally breaking this header this way, we prevent people from
using this header in their C++<11 sources.
'comconsole_pcidev'. The former allows to set the base address of the
serial console i/o port. The later takes the string of the format
'bus:device:function:[bar]' as a value and uses the serial port attached
as PCI device at the specified location for console.
Both variants pass 'hw.uart.console' variable to the uart driver to
properly hand-over the kernel console.
Change allows to use ISA serial ports other than COM1 for the
loader/kernel console without loader recompilation. Also, you can use
PCI-attached port as the console, e.g. Intel AMT serial pseudo-port on
some motherboards based on Q67 chipset.
Reviewed by: jhb
MFC after: 2 weeks
Several callers of null_nodeget() did the cleanup itself, but several
missed it, most prominent being null_bypass(). Remove the cleanup from
the callers, now null_nodeget() handles lowervp free itself.
Reported and tested by: pho
MFC after: 1 week
This brings in the emuxkireg.h from NetBSD (dev/pci) which
is used for the same purpose but is smaller. The emu10k1
is now free from the GPL.
PR: 153901
Obtained from: NetBSD
Approved by: core (mentor implicit)
MFC after: 2 weeks
- Only initialize the per-cpu switchticks and switchtime in sched_throw()
for the very first context switch on APs during boot. This avoids a
small gap between the middle of thread_exit() and sched_throw() where
time is not accounted to any thread.
- In thread_exit(), update the timestamp bookkeeping to track the changes
to mi_switch() introduced by td_rux so that the code once again matches
the comment claiming it is mimicing mi_switch(). Specifically, only
update the per-thread stats directly and depend on ruxagg() to update
p_rux rather than adjusting p_rux directly. While here, move the
timestamp bookkeeping as late in the function as possible.
Reviewed by: bde, kib
MFC after: 1 week
- Actually increment ndomain when building our list of known domains
so that we can properly renumber them to be 0-based and dense.
- If the number of domains exceeds the configured maximum (VM_NDOMAIN),
bail out of processing the SRAT and disable NUMA rather than hitting an
obscure panic later.
- Don't bother parsing the SRAT at all if VM_NDOMAIN is set to 1 to
disable NUMA (the default).
Reported by: phk (2)
MFC after: 1 week
the number of links against LINK_MAX (which is INT16_MAX), not against
UINT32_MAX. Otherwise, the constant would implicitly be converted to
-1.
Reviewed by: pjd
MFC after: 1 week
reference on a group in the leaving state while iterating over the loop.
Instead, use the same approach used in igmp_ifdetach() and mld_ifdetach()
of placing the groups to free on pending release list and then releasing
the references after dropping the IF_ADDR_LOCK. This closes an ugly race
where the code was dropping the lock in the middle of iterating over the
list. It also fixes some additional potential use-after-free bugs since
the cancellation routine also applied other changes to the group after
dropping the reference. Now those changes are performed before the
reference is dropped and the group is potentially freed.
Prodded to fix by: glebius
Reviewed by: bz
MFC after: 1 week
http://www.graphicsgems.org/
At the time it claimed to be 3-4 times faster than the traditional
algorithm.
PR: 18769
Approved by: jhb (mentor)
MFC after: 2 weeks
of the SIOC[DG]LIFADDR icotls before dropping the IF_ADDR_LOCK() and
release the reference after using it. This prevents the address from
being potentially freed out from under the ioctl handler.
Reviewed by: bz
MFC after: 1 week
The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.
This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.
is compared to an integer, by casting the pointer to l_uintptr_t. No
functional difference on both i386 and amd64.
Reviewed by: ed, jhb
MFC after: 1 week
passed to resource_list_add(). The rid that was just returned by
bus_alloc_resource_any() should have been used instead.
Reviewed by: jhb
MFC after: 1 week
include the MACHINE_CPUARCH directory if it differents from MACHINE when
building an index for a single machine. Also, include the 'x86' directory
when building an index for i386, pc98, or amd64.
MFC after: 1 week
sector size same as acd driver does. Together with r228808 and r228847 this
allows existing multimedia/vlc to play Audio CDs via CAM cd driver.
PR: ports/162190
MFC after: 1 week
In this contest, index refers to the index(3) function. In this case it
doesn't really harm, as this function is never called with idx == NULL.
MFC after: 2 weeks
As I looked through the C library, I noticed the FreeBSD MIPS port has a
hand-written version of index(). This is nice, if it weren't for the
fact that most applications call strchr() instead.
Also, on the other architectures index() and strchr() are identical,
meaning we have two identical pieces of code in the C library and
statically linked applications.
Solve this by naming the actual file strchr.[cS] and let it use
__strong_reference()/STRONG_ALIAS() to provide the index() routine. Do
the same for rindex()/strrchr().
This seems to make the C libraries and static binaries slightly smaller,
but this reduction in size seems negligible.
tmpfs_nocacheread(). It is both unnecessary and a pessimization. It
results in either the page being zeroed twice or zeroed first and then
overwritten by an I/O operation.
MFC after: 3 weeks
cam_periph_runccb() since the beginning checks it and releases device queue.
After r203108 it even clears CAM_DEV_QFRZN flag after that to avoid double
release, so removed code is unreachable now.
MFC after: 1 month
It seems strchr() and strrchr() are used more often than index() and
rindex(). Therefore, simply migrate all kernel code to use it.
For the XFS code, remove an empty line to make the code identical to
the code in the Linux kernel.
I was considering adding it to libc as well, but last minute I thought
it would be good enough to add it to libkern exclusively. I forgot to
rename the man page and hook it up.
It was only used by ufs and ext2 and I have really strong doubts that
there are other pieces of code that also use this function. If it turns
out that external drivers use this code as well, I'd be happy to migrate
or revert.
Bump __FreeBSD_version while there.
While there, remove a useless check from the code. memcchr() always
returns characters unequal to 0xff in this case, so inosused[i] ^ 0xff
can never be equal to zero. Also, the fact that memcchr() returns a
pointer instead of the number of bytes until the end, makes conversion
to an offset far more easy.
