As per POSIX, a simple command must have at least one redirection,
assignment word or command word.
These occured in rare cases such as eval "f()" .
The extension of allowing no commands inside { }, if, while, for, etc.
remains.
external mbuf buffer management capabilities in the future.
For now only EXT_FREE_OK is defined with current legacy behavior.
Sponsored by: The FreeBSD Foundation
Author: Shirish S <s.shirish@samsung.com>
Date: Thu Aug 30 07:04:06 2012 +0000
drm: edid: add support for E-DDC
The current logic for probing ddc is limited to
2 blocks (256 bytes), this patch adds support
for the 4 block (512) data.
To do this, a single 8-bit segment index is
passed to the display via the I2C address 30h.
Data from the selected segment is then immediately
read via the regular DDC2 address using a repeated
I2C 'START' signal.
Signed-off-by: Shirish S <s.shirish@samsung.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
bridge Xeon.
Summary: These are PEBS events but they're also available as normal
counter/sample events. The source table (Table 19-2) lists the
base versions (LOAD, STLB_MISS, SPLIT, ALL) but it says they must
be qualified with other values. This particular commit fleshes
out those umask values.
Source:
* Linux; SDM June 2013, Volume 3B, Table 19-2 and 18-21.
Tested:
* Sandy Bridge (non-Xeon)
The iic_dp_aux_detach callback is therefore useless: it's replaced by
bus_generic_detach. This fixes a "General protection fault" panic during
second (incorrect) deletion of the child.
Tested by: kwm@
Reviewed by: ray@
kld_unload event handler which gets invoked after a linker file has been
successfully unloaded. The kld_unload and kld_load event handlers are now
invoked with the shared linker lock held, while kld_unload_try is invoked
with the lock exclusively held.
Convert hwpmc(4) to use these event handlers instead of having
kern_kldload() and kern_kldunload() invoke hwpmc(4) hooks whenever files are
loaded or unloaded. This has no functional effect, but simplifes the linker
code somewhat.
Reviewed by: jhb
2 predictable branches nowadays. However as a pre-condition the
caller had to ensure that the mbuf pkthdr did not have any mtags
attached to it, costing some potential branches again.
Sponsored by: The FreeBSD Foundation
linker_init_kernel_modules() and linker_preload() in order to remove most
of the checks for !cold before asserting that the kld lock is held. These
routines are invoked by SYSINIT(9), so there's no harm in them taking the
kld lock.
breaks the "2step" feature of the driver, e.g. in order to read 360
KiB media on a 1200 KiB drive.
As the only potential advantage of implied (vs. explicit) seeks is to
minimize the software effort, yet our driver always contained the
logic needed for explicit seeks, simply dropping implied seeks is the
best solution without introducing risks for new bugs. There is no
performance penalty, reading a 1440 KiB medium takes exactly the same
time with both, implied or explicit seeks.
MFC after: 1 week
The mbuf type is an enumerator with only a handful of types in use and
thus reduced from int to 8bits allowing for 255 types to be specified.
Only 5 types have been in use for a long time.
The flags field gets the remaining 24 bits with 12 bits for global
persistent flags and 12 bits for protocol/layer specific overlays.
Some of the global flags/functionality can be moved to the csum_flags
or ext_flags bits in the future.
MT_VENDOR[1-4] and MT_EXP[1-4] types for vendor-internal and
experimental local mapping are added.
The size of m_hdr shrinks from 24/40 to 20/32bytes (32/64bit architectures).
Sponsored by: The FreeBSD Foundation
POSIX does not require ++ and -- in arithmetic. It is probably more useful
to reject them than to treat ++x and --x as x silently.
Note that the behaviour of increment and decrement can be obtained via
(x+=1), ((x+=1)-1), (x-=1) and ((x-=1)+1).
PR: bin/176444
features. The changes in particular are:
o Remove rarely used "header" pointer and replace it with a 64bit protocol/
layer specific union PH_loc for local use. Protocols can flexibly overlay
their own 8 to 64 bit fields to store information while the packet is
worked on.
o Mechanically convert IP reassembly, IGMP/MLD and ATM to use pkthdr.PH_loc
instead of pkthdr.header.
o Extend csum_flags to 64bits to allow for additional future offload
information to be carried (e.g. iSCSI, IPsec offload, and others).
o Move the RSS hash type enumerator from abusing m_flags to its own 8bit
rsstype field. Adjust accessor macros.
o Add cosqos field to store Class of Service / Quality of Service information
with the packet. It is not yet supported in any drivers but allows us to
get on par with Cisco/Juniper in routing applications (plus MPLS QoS) with
a modernized ALTQ.
o Add four 8 bit fields l[2-5]hlen to store the relative header offsets
from the start of the packet. This is important for various offload
capabilities and to relieve the drivers from having to parse the packet
and protocol headers to find out location of checksums and other
information. Header parsing in drivers is a lot of copy-paste and
unhandled corner cases which we want to avoid.
o Add another flexible 64bit union to map various additional persistent
packet information, like ether_vtag, tso_segsz and csum fields.
Depending on the csum_flags settings some fields may have different usage
making it very flexible and adaptable to future capabilities.
o Restructure the CSUM flags to better signify their outbound (down the
stack) and inbound (up the stack) use. The CSUM flags used to be a bit
chaotic and rather poorly documented leading to incorrect use in many
places. Bring clarity into their use through better naming.
Compatibility mappings are provided to preserve the API. The drivers
can be corrected one by one and MFC'd without issue.
o The size of pkthdr stays the same at 48/56bytes (32/64bit architectures).
Sponsored by: The FreeBSD Foundation
free function access to the mbuf the external memory was attached
to.
Mechanically adjust all users to include the mbuf parameter.
This fixes a long standing annoyance for external free functions.
Before one had to sacrifice one of the argument pointers for this.
Sponsored by: The FreeBSD Foundation
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Jun 4 18:39:20 2012 +0200
drm/i915: adjusted_mode->clock in the dp mode_fixup
... instead of changing mode->clock, which we should leave as-is.
After the previous patch we only touch that if it's a panel, and then
adjusted mode->clock equals adjusted_mode->clock. Outside of
intel_dp.c we only use ajusted_mode->clock in the mode_set functions.
Within intel_dp.c we only use it to calculate the dp dithering
and link bw parameters, so that's the only thing we need to fix
up.
As a temporary ugliness (until the cleanup in the next patch) we
pass the adjusted_mode into dp_dither for both parameters (because
that one still looks at mode->clock).
Note that we do overwrite adjusted_mode->clock with the selected dp
link clock, but that only happens after we've calculated everything we
need based on the dotclock of the adjusted output configuration.
Outside of intel_dp.c only intel_display.c uses adjusted_mode->clock,
and that stays the same after this patch (still equals the selected dp
link clock). intel_display.c also needs the actual dotclock (as
target_clock), but that has been fixed up in the previous patch.
v2: Adjust the debug message to also use adjusted_mode->clock.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
