a seperate directory hierarchy used to build tools). This boils
down to replacing the use of ${.CURDIR} with either ${SRCDIR}
or ${SRCTOP}. SRCDIR is defined as the directory in which the
Makefile lives that bmake(1) is currently reading. Use SRCTOP
when reaching outside of makefs's directory.
PLL1 is used by the cpu core, allowing changing freq is needed for cpufreq.
The factors table contains all the frequencies in the operating point table
present in the DTS.
MFC after: 1 week
these show a 9-10% reduction in user and system time for a buildworld -j48.
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
* On arm64 we need to use the ${MACHINE_CPUARCH} subdirectory.
* env.c is only needed when using forth so only build it there.
Sponsored by: ABT Systems Ltd
hardware that supports the mp extensions. If so it should use the broadcast
tlb invalidate instructions as other CPUs or devices may need to know about
the invalidation.
To simplify the code have the compiler optimise out the else case when not
builing for Cortex-A8.
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D8092
To achieve that the whole svm_softc is allocated with contigmalloc now.
It would be more effient to de-embed those arrays and allocate only them
with contigmalloc.
Previously, if malloc(9) used non-contiguous pages for the arrays, then
random bits in physical pages next to the first page would be used to
determine permissions for I/O port and MSR accesses. That could result
in a guest dangerously modifying the host hardware configuration.
One example is that sometimes NMI watchdog driver in a Linux guest
would be able to configure a performance counter on a host system.
The counter would generate an interrupt and if hwpmc(4) driver is loaded
on the host, then the interrupt would be delivered as an NMI.
Discussed with: jhb
Reviewed by: grehan
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8321
loss event but not use or obay the recommendations i.e. values set by it in some
cases.
Here is an attempt to solve that confusion by following relevant RFCs/drafts.
Stack only sets congestion window/slow start threshold values when there is no
CC module availalbe to take that action. All CC modules are inspected and
updated when needed to take appropriate action on loss.
tcp_stacks/fastpath module has been updated to adapt these changes.
Note: Probably, the most significant change would be to not bring congestion
window down to 1MSS on a loss signaled by 3-duplicate acks and letting
respective CC decide that value.
In collaboration with: Matt Macy <mmacy at nextbsd dot org>
Discussed on: transport@ mailing list
Reviewed by: jtl
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D8225
when the new/default NFS server was running, for the "-n" option.
This patch fixes the problem for head and stable/11. For stable/10 the
patch will need to be modified when MFC'd, since the stable/10 mountd.c
handles both old and new NFS servers.
Since the new NFS server uses vfs.nfsd.nfs_privport == 0 by default,
there wouldn't have been many users affected by the code not setting
it to 0 when the "-n" option was specified.
PR: 213450
Submitted by: rs@bytecamp.net
MFC after: 2 weeks
In r304435, ip_output() was changed to use the result of the route
lookup to decide whether the outgoing packet was a broadcast or
not. This introduced a regression on interfaces where
IFF_BROADCAST was not set (e.g. point-to-point links), as the
algorithm could incorrectly treat the destination address as a
broadcast address, and ip_output() would subsequently drop the
packet as broadcasting on a non-IFF_BROADCAST interface is not
allowed.
Differential Revision: https://reviews.freebsd.org/D8303
Reviewed by: jtl
Reported by: ambrisko
MFC after: 2 weeks
X-MFC-With: r304435
Sponsored by: Dell EMC Isilon
- Make !KDB config buildable.
- Simplify interface to nmi_handle_intr() by evaluating panic_on_nmi
in one place, namely nmi_call_kdb(). This allows to remove do_panic
argument from the functions, and to remove i386/amd64 duplication of
the variable and sysctl definitions. Note that now NMI causes
panic(9) instead of trap_fatal() reporting and then panic(9),
consistently for NMIs delivered while CPU operated in ring 0 and 3.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
environment variable to allow conditional compilation based on EFI
being present or not. Provide efi-setenv, efi-getenv, and
efi-unsetenv, though those need improvement. Move the efi definition
to libefi (but include a reference so they get included).
Push-Pull Two Wire interface is a almost compatible iic like bus used
in sun6i SoC. It's only use is to communicate with the power management IC.
Reviewed by: jmcneill
MFC after: 1 week
Relnotes: yes
contiguous regions in an mbuf chain.
If the payload of an mbuf ends at a page boundary count_mbuf_nsegs would
incorrectly consider the next mbuf's payload physically contiguous based
solely on a KVA comparison.
MFC after: 1 week
Sponsored by: Chelsio Communications
On several Intel chipsets, diagnostic NMIs sent from BMC or NMIs
reporting hardware errors are broadcasted to all CPUs.
When kernel is configured to enter kdb on NMI, the outcome is
problematic, because each CPU tries to enter kdb. All CPUs are
executing NMI handlers, which set the latches disabling the nested NMI
delivery; this means that stop_cpus_hard(), used by kdb_enter() to
stop other cpus by broadcasting IPI_STOP_HARD NMI, cannot work. One
indication of this is the harmless but annoying diagnostic "timeout
stopping cpus".
Much more harming behaviour is that because all CPUs try to enter kdb,
and if ddb is used as debugger, all CPUs issue prompt on console and
race for the input, not to mention the simultaneous use of the ddb
shared state.
Try to fix this by introducing a pseudo-lock for simultaneous attempts
to handle NMIs. If one core happens to enter NMI trap handler, other
cores see it and simulate reception of the IPI_STOP_HARD. More,
generic_stop_cpus() avoids sending IPI_STOP_HARD and avoids waiting
for the acknowledgement, relying on the nmi handler on other cores
suspending and then restarting the CPU.
Since it is impossible to detect at runtime whether some stray NMI is
broadcast or unicast, add a knob for administrator (really developer)
to configure debugging NMI handling mode.
The updated patch was debugged with the help from Andrey Gapon (avg)
and discussed with him.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D8249
The feature flags chek is missing the corner case where we have valid pool
version, but feature flags are not enabled - as for example plain v28 pool.
This update does fix the boot support for such pools.
Reviewed by: avg, allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D8331
bsd.own.mk (included from src.opts.mk) sets SHLIBDIR?=${LIBDIR}, so
SHLIBDIR must be set before including either one of them.
MFC with: 305626
Sponsored by: The FreeBSD Foundation
