In all practical situations, the resolver visibility is static.
Requested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: so (emaste)
Differential revision: https://reviews.freebsd.org/D20281
Microarchitectural buffers on some Intel processors utilizing
speculative execution may allow a local process to obtain a memory
disclosure. An attacker may be able to read secret data from the
kernel or from a process when executing untrusted code (for example,
in a web browser).
Reference: https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00233.html
Security: CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091
Security: FreeBSD-SA-19:07.mds
Reviewed by: jhb
Tested by: emaste, lwhsu
Approved by: so (gtetlow)
of them listed in opt_global.h which is not generated while building
modules outside of a kernel and such modules never match real cofigured
kernel.
So, we should prevent our users from building obviously defective modules.
Therefore, remove the root cause of the building of modules outside of a
kernel - the possibility of building modules with DEBUG or KTR flags.
And remove all of DEBUG printfs as it is incomplete and in threaded
programms not informative, also a half of system call does not have DEBUG
printf. For debuging Linux programms we have dtrace, ktr and ktrace ability.
PR: 222861
Reviewed by: trasz
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20178
This gets rid of the global cpu_ipi_pending array.
While replace cmpset with fcmpset in the delivery code and opportunistically
check if given IPI is already pending.
Sponsored by: The FreeBSD Foundation
Having IPSEC compiled into the kernel imposes a non-trivial
performance penalty on multi-threaded workloads due to IPSEC
refcounting. In my benchmarks of multi-threaded UDP
transmit (connected sockets), I've seen a roughly 20% performance
penalty when the IPSEC option is included in the kernel (16.8Mpps
vs 13.8Mpps with 32 senders on a 14 core / 28 HTT Xeon
2697v3)). This is largely due to key_addref() incrementing and
decrementing an atomic reference count on the default
policy. This cause all CPUs to stall on the same cacheline, as it
bounces between different CPUs.
Given that relatively few users use ipsec, and that it can be
loaded as a module, it seems reasonable to ask those users to
load the ipsec module so as to avoid imposing this penalty on the
GENERIC kernel. Its my hope that this will make FreeBSD look
better in "out of the box" benchmark comparisons with other
operating systems.
Many thanks to ae for fixing auto-loading of ipsec.ko when
ifconfig tries to configure ipsec, and to cy for volunteering
to ensure the the racoon ports will load the ipsec.ko module
Reviewed by: cem, cy, delphij, gnn, jhb, jpaetzel
Differential Revision: https://reviews.freebsd.org/D20163
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).
This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp
[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).
ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.
(MFC commentary)
This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.
I have no plans to do this MFC as of now.
Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from: melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20044
IPI_STOP is used after panic or when ddb is entered manually. MONITOR/
MWAIT allows CPUs that support the feature to sleep in a low power way
instead of spinning. Something similar is already used at idle.
It is perhaps especially useful in oversubscribed VM environments, and is
safe to use even if the panic/ddb thread is not the BSP. (Except in the
presence of MWAIT errata, which are detected automatically on platforms with
known wakeup problems.)
It can be tuned/sysctled with "machdep.stop_mwait," which defaults to 0
(off). This commit also introduces the tunable
"machdep.mwait_cpustop_broken," which defaults to 0, unless the CPU has
known errata, but may be set to "1" in loader.conf to signal that mwait
wakeup is broken on CPUs FreeBSD does not yet know about.
Unfortunately, Bhyve doesn't yet support MONITOR extensions, so this doesn't
help bhyve hypervisors running FreeBSD guests.
Submitted by: Anton Rang <rang AT acm.org> (earlier version)
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20135
Rather than just accessing it via pointer cast.
No functional change intended.
Discussed with: kib (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20135
move bits that are MI out into the headers in compat/linux.
For that remove bogus _packed attribute from struct l_sockaddr
and use MI types for struct members.
And continue to move into the linux_common module a code that is
intended for both Linuxulator modules (both instruction set - 32 & 64 bit)
or for external modules like linsysfs or linprocfs.
To avoid header pollution introduce new sys/compat/linux_common.h header.
Reviewed by: emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20137
Use it wherever COMPAT_FREEBSD11 is currently specified, like r309749.
Reviewed by: imp, jhb, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20120
After the referenced commit, we did not set x87 and sse valid bits in
the xstate_bv bitmask for initial fpu state (stored in memory), when
using XSAVE.
The state is loaded into FPU register file to initialize the process
FPU state, and since both bits were clear, the default x87 and SSE
states were loaded. By chance, FreeBSD ABI SSE2 state is same as FPU
initial state, so the bug is not visible for 64bit processes. But on
i386, the precision control should be set to double (53bit mantissa),
instead of the default double extended (64bit mantissa). For 32bit
processes on amd64, kernel reloads control word with the right mask,
which only left native i386 and amd64 native but using x87 as
affected.
Fix it by setting minimal required xstate_bv mask.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Some early PCIe chipsets are explicitly listed in the white-list to
enable use of the MMIO config space accesses, perhaps because ACPI
tables were not reliable source of the base MCFG address at that time.
For that chipsets, MCFG base was read from the known chipset MCFGbase
config register.
During very early stage of boot, when access to the PCI config space
is performed (see e.g. pci_early_quirks.c), we cannot map 255MB of
registers because the method used with pre-boot pmap overflows initial
kernel page tables.
Move fallback to read MCFGbase to the attachment method of the
x86/legacy device, which removes code duplication, and results in the
use of io accesses until MCFG is parsed or legacy attach called.
For amd64, pre-initialize cfgmech with CFGMECH_1, right now we
dynamically assign CFGMECH_1 to it anyway, and remove checks for
CFGMECH_NONE.
There is a mention in the Intel documentation for corresponding
chipsets that OS must use either io port or MMIO access method, but we
already break this rule by reading MCFGbase register, so one more
access seems to be innocent.
Reported by: longwitz@incore.de
PR: 236838
Reviewed by: avg (other version), jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19833
Remove redundant npxsave_core definition while here.
Suggested by: Anton Rang
Reviewed by: kib, Anton Rang <rang AT acm.org>
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D19665
For 32-bit Linuxulator, ipc() syscall was historically
the entry point for the IPC API. Starting in Linux 4.18, direct
syscalls are provided for the IPC. Enable it.
MFC after: 1 month
There are some unusual cases where a process may cause an mlock()ed
range of memory to be unmapped. If the application subsequently
faults on that region, the handler may attempt to create a superpage
mapping backed by the resident, wired pages. However, the pmap code
responsible for creating such a mapping (pmap_enter_pde() on i386
and amd64) does not ensure that a leaf page table page is available
if the superpage is later demoted; the demotion operation must therefore
perform a non-blocking page allocation and must unmap the entire
superpage if the allocation fails. The pmap layer ensures that this
can never happen for wired mappings, and so the case described above
breaks that invariant.
For now, simply ensure that the MI fault handler never attempts to
create a wired superpage except via promotion.
Reviewed by: kib
Reported by: syzbot+292d3b0416c27c131505@syzkaller.appspotmail.com
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19670
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting. PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.
Requested by: jhb
Reviewed by: jhb, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
PTI mode for the process pmap on exec is activated iff P_MD_PTI is set.
On exec, the existing vmspace can be reused only if pti mode of the
pmap matches the P_MD_PTI flag of the process. Add MD
cpu_exec_vmspace_reuse() callback for exec_new_vmspace() which can
vetoed reuse of the existing vmspace.
MFC note: md_flags change struct proc KBI.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
and for %ecx after RDTSCP.
Initialize TSC_AUX MSR with CPUID. It allows for userspace to cheaply
identify CPU it was executed on some time ago, which is sometimes useful.
Note: The values returned might be changed in future.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In all of the architectures we have today, we always use PAGE_SIZE.
While in theory one could define different things, none of the
current architectures do, even the ones that have transitioned from
32-bit to 64-bit like i386 and arm. Some ancient mips binaries on
other systems used 8k instead of 4k, but we don't support running
those and likely never will due to their age and obscurity.
Reviewed by: imp (who also contributed the commit message)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19280
not supported.
According to SDM rev. 69 vol. 3, for PDPTE registers loads:
- when PAT is not supported, access to the PDPTE page is performed as
UC, see 4.9.1;
- when PAT is supported, the access is WB, see 4.9.2.
So potentially CPU might load stale memory as PDPTEs if both PAT and
self-snoop are not implemented. To be safe, add total local cache
flush to pmap_cold() before initial load of cr3, and flush PDPTE page
in pmap_pinit(), if PAT is not implemented.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19365
Instead carefully write upper word, and only than the lower word with
PG_V, for previously invalid ptes. It provides some measurable system
time saving on buildworld.
Reviewed by: markj
Tested by: pho
Measured by: bde (early version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D19226
Skylake Xeons.
See SDM rev. 68 Vol 3 4.6.2 Protection Keys and the description of the
RDPKRU and WRPKRU instructions.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
Some older compilers, when generating PIC code, cannot handle inline
asm that clobbers %ebx (because %ebx is used as the GOT offset
register). Userspace versions avoid clobbering %ebx by saving it to
stack before executing the CPUID instruction.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
With this change, randomization can be enabled for all non-fixed
mappings. It means that the base address for the mapping is selected
with a guaranteed amount of entropy (bits). If the mapping was
requested to be superpage aligned, the randomization honours the
superpage attributes.
Although the value of ASLR is diminshing over time as exploit authors
work out simple ASLR bypass techniques, it elimintates the trivial
exploitation of certain vulnerabilities, at least in theory. This
implementation is relatively small and happens at the correct
architectural level. Also, it is not expected to introduce
regressions in existing cases when turned off (default for now), or
cause any significant maintaince burden.
The randomization is done on a best-effort basis - that is, the
allocator falls back to a first fit strategy if fragmentation prevents
entropy injection. It is trivial to implement a strong mode where
failure to guarantee the requested amount of entropy results in
mapping request failure, but I do not consider that to be usable.
I have not fine-tuned the amount of entropy injected right now. It is
only a quantitive change that will not change the implementation. The
current amount is controlled by aslr_pages_rnd.
To not spoil coalescing optimizations, to reduce the page table
fragmentation inherent to ASLR, and to keep the transient superpage
promotion for the malloced memory, locality clustering is implemented
for anonymous private mappings, which are automatically grouped until
fragmentation kicks in. The initial location for the anon group range
is, of course, randomized. This is controlled by vm.cluster_anon,
enabled by default.
The default mode keeps the sbrk area unpopulated by other mappings,
but this can be turned off, which gives much more breathing bits on
architectures with small address space, such as i386. This is tied
with the question of following an application's hint about the mmap(2)
base address. Testing shows that ignoring the hint does not affect the
function of common applications, but I would expect more demanding
code could break. By default sbrk is preserved and mmap hints are
satisfied, which can be changed by using the
kern.elf{32,64}.aslr.honor_sbrk sysctl.
ASLR is enabled on per-ABI basis, and currently it is only allowed on
FreeBSD native i386 and amd64 (including compat 32bit) ABIs. Support
for additional architectures will be added after further testing.
Both per-process and per-image controls are implemented:
- procctl(2) adds PROC_ASLR_CTL/PROC_ASLR_STATUS;
- NT_FREEBSD_FCTL_ASLR_DISABLE feature control note bit makes it possible
to force ASLR off for the given binary. (A tool to edit the feature
control note is in development.)
Global controls are:
- kern.elf{32,64}.aslr.enable - for non-fixed mappings done by mmap(2);
- kern.elf{32,64}.aslr.pie_enable - for PIE image activation mappings;
- kern.elf{32,64}.aslr.honor_sbrk - allow to use sbrk area for mmap(2);
- vm.cluster_anon - enables anon mapping clustering.
PR: 208580 (exp runs)
Exp-runs done by: antoine
Reviewed by: markj (previous version)
Discussed with: emaste
Tested by: pho
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D5603
Make it more comprehensive on i386, by not setting nx bit for any
mapping, not just adding PF_X to all kernel-loaded ELF segments. This
is needed for the compatibility with older i386 programs that assume
that read access implies exec, e.g. old X servers with hand-rolled
module loader.
Reported and tested by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It was broken before PAE/no-PAE merge, but since now PAE is the
default, resume is apparently becomes for all machines.
The corrected issues:
- the trampoline page is not mapped executable, so machine faults when
paging is on;
- MSR.EFER and %cr4 both should be loaded before paging is enabled,
otherwise paging structures are invalid (cr4.PAE and EFER.NX).
- MSR.EFER and %cr4 should be only loaded if present. I attempt to handle
this by not touching the registers if the value is zero.
There are some more bits still not quite correct, e.g. unconditional
access to %cr4 in resumectx.
Reported and debugging help by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Initialize the static kenv in pmap_cold() and fetch user opinion on
vm.pmap.pae_mode tunable if hardware is capable. Note that the static
environment is reinitilized in init386() later when paging is enabled.
Reviewed by: bde
Discussed with: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
Compiling a GENERIC kernel for i386 with clang 8.0 results in the
following warning:
/usr/src/sys/i386/i386/sys_machdep.c:542:40: error: 'sizeof ((ldt))' will return the size of the pointer, not the array itself [-Werror,-Wsizeof-pointer-div]
nldt = pldt != NULL ? pldt->ldt_len : nitems(ldt);
^~~~~~~~~~~
/usr/src/sys/sys/param.h:299:32: note: expanded from macro 'nitems'
#define nitems(x) (sizeof((x)) / sizeof((x)[0]))
~~~~~~~~~~~ ^
Indeed, 'ldt' is declared as 'union descriptor *', so nitems() is not
the right way to determine the number of LDTs. Instead, the NLDT define
from sys/x86/include/segments.h should be used.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19074
On CPUs supporting cmpxchg8b, fetch is performed by cmpxchg8b on
corresponding CPU slot, which unconditionally write to the slot. If
for that slot, the owner CPU increments it, then both CPUs might run
the cmpxchg8b instruction concurrently and this might race and
override the incremental write. So the counter update would be lost.
Fix it by implementing fetch as IPI and accumulation of result. It is
acceptable for rare counter64 fetch operation to be more expensive.
Diagnosed and tested by: Andreas Longwitz <longwitz@incore.de>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
With the current 24G memory limit for GENERIC, the boot time test
causes quite visible delay, amplified by the default
debug.late_console = 0.
The comment text is copied from the same setting explanation for
amd64.
Suggested by: bde
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
iflib is already a module, but it is unconditionally compiled into the
kernel. There are drivers which do not need iflib(4), and there are
situations where somebody might not want iflib in kernel because of
using the corresponding driver as module.
Reviewed by: marius
Discussed with: erj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19041
Effectively all i386 kernels now have two pmaps compiled in: one
managing PAE pagetables, and another non-PAE. The implementation is
selected at cold time depending on the CPU features. The vm_paddr_t is
always 64bit now. As result, nx bit can be used on all capable CPUs.
Option PAE only affects the bus_addr_t: it is still 32bit for non-PAE
configs, for drivers compatibility. Kernel layout, esp. max kernel
address, low memory PDEs and max user address (same as trampoline
start) are now same for PAE and for non-PAE regardless of the type of
page tables used.
Non-PAE kernel (when using PAE pagetables) can handle physical memory
up to 24G now, larger memory requires re-tuning the KVA consumers and
instead the code caps the maximum at 24G. Unfortunately, a lot of
drivers do not use busdma(9) properly so by default even 4G barrier is
not easy. There are two tunables added: hw.above4g_allow and
hw.above24g_allow, the first one is kept enabled for now to evaluate
the status on HEAD, second is only for dev use.
i386 now creates three freelists if there is any memory above 4G, to
allow proper bounce pages allocation. Also, VM_KMEM_SIZE_SCALE changed
from 3 to 1.
The PAE_TABLES kernel config option is retired.
In collaboarion with: pho
Discussed with: emaste
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18894
It seems that libkern/mcount.c is the only consumer of vm/pmap.h that
does not include machine/atomic.h. Make it work by bringing
machine/atomic.h when pmap.h is used for kernel non-asm .c file.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
pmap_kextract().
pmap_kextract() can race with promotion/demotion on the kernel page
table, in which case current non-atomic 64bit read would see torn
value, breaking pmap_kextract(). pmap_kextract() would correctly
handle either promoted or demoted PDE, but not a mix where one word
is from a different state.
It requires PAE and > 4G memory to reproduce. We observed this in
real loads, both for intensive use of malloc(9)/free(9) where
vtoslab() returned invalid pointer to the slab, and with the use of
busdma_bounce, where incorrect page was bounced.
In collaboration with: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18714
It is useful for inspecting tlb shootdown hangs. The smp_tlb_generation value
is available using regular ddb data inspection commands.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
This KPI may in principle be used to create kernel mappings, in which
case we certainly should not be setting PG_U. In any case, PG_U must be
set on all layers in the page tables to grant user mode access, and we
were only setting it on leaf entries. Thus, this change should have no
functional impact.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Due to the typo, it shared the frame with the CMAP1 transient mapping.
In collaboration with: pho
MFC after: 3 days
Sponsored by: The FreeBSD Foundation (kib)
With the introduction of M_EXEC support for kmem_malloc(), some kernel
mappings start having NX bit set in the paging structures early, for
PAE kernels on machines with NX support, i.e. practically on all
machines. In particular, AP trampoline and initialization needs to
access pages which translations has NX bit set, before initializecpu()
is called.
Check for CPUID NX feature and enable EFER.NXE before we enable paging
in mp boot trampoline. This allows the CPU to use the kernel page
table instead of generating page fault due to reserved bit set.
PR: 233819
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
On some architectures, the structures returned by PT_GET*REGS were not
fully populated and could contain uninitialized stack memory. The same
issue existed with the register files in procfs.
Reported by: Thomas Barabosch, Fraunhofer FKIE
Reviewed by: kib
MFC after: 3 days
Security: kernel stack memory disclosure
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18421
We zero the whole structure; we don't need to zero the __spare__ field again.
Remove trailing whitespace.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Include evdev support and drivers in the amd64 and i386 GENERIC and MINIMAL
kernels. Evdev is used by X and wayland to handle input devices, and this
change, together with upcomming changes in ports will make us handle input
devices better in graphical UIs.
Reviewed by: wulf, bapt, imp
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D17912
Avoid using DELAY() since it can try to use spin locks on CPUs without
a P-state invariant TSC. For cpu_lock_delay(), always use the TSC if
it exists (even if it is not P-state invariant) to delay for a
microsecond. If the TSC does not exist, read from I/O port 0x84 to
delay instead.
PR: 228768
Reported by: Roger Hammerstein <cheeky.m@live.com>
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17851
Replace a call to DELAY(1) with a new cpu_lock_delay() KPI. Currently
cpu_lock_delay() is defined to DELAY(1) on all platforms. However,
platforms with a DELAY() implementation that uses spin locks should
implement a custom cpu_lock_delay() doesn't use locks.
Reviewed by: kib
MFC after: 3 days
Add a new 'debugger_on_trap' knob separate from 'debugger_on_panic'
and make the calls to kdb_trap() in MD fatal trap handlers prior to
calling panic() conditional on this new knob instead of
'debugger_on_panic'. Disable the new knob by default. Developers who
wish to recover from a fatal fault by adjusting saved register state
and retrying the faulting instruction can still do so by enabling the
new knob. However, for the more common case this makes the user
experience for panics due to a fatal fault match the user experience
for other panics, e.g. 'c' in DDB will generate a crash dump and
reboot the system rather than being stuck in an infinite loop of fatal
fault messages and DDB prompts.
Reviewed by: kib, avg
MFC after: 2 months
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D17768
The loader tunable 'debug.verbose_sysinit' may be used to toggle verbosity.
This is added to the debugging section of these kernconfs to be turned off
in stable branches for clarity of intent.
MFC after: never
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain. The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted. Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.
This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.
Discussed with: gallatin, jeff
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17418
This driver has been obsolete since the FreeBSD 4.x. It should have
been removed then since the sym(4) driver had subsumed it. The driver
was commented out of GENERIC in 2000.
RelNotes: Yes
stg(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
nsp(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
ncv(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame..
Relnote: Yes
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
We're planning on removing adv, adw, aha, aic, bt, ncv, nsp, and stg
soon. They have been tagged for removal in 12. At least get them out
of GENERIC.
MFC after: 3 days
Relnotes: yes
When modifying an existing managed mapping, we should find a PV entry
for the old mapping. Verify this.
Before r335784 this would have been implicitly tested by the fact that
we always freed the PV entry for the old mapping.
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17626
With lld 7.0.0, a rather nasty problem in our kernel linker script came
to light. We use quite a lot of so-called "orphan" sections, e.g.
sections which are not explicitly named in the linker script. Mainly,
these are the linker sets (such as set_sysinit_set).
Note that the placement of these orphan sections is not very well
defined. Usually, any read-only orphan sections get placed after the
last read-only section from the linker script, and similarly for the
read/write variants.
In our linker scripts, there are also symbol assignments like _etext,
_edata, and __bss_start, which are used in various places to refer to
the start or end addresses of sections.
However, some of these symbol assignments are interspersed with output
section descriptions. While the linker will guarantee that a symbol
assignment after some section will stay after that section, there is no
guarantee that an orphan section cannot be inserted just before it.
Take for example the following script:
SECTIONS
{
.data : { *(.data) }
__bss_start = .;
.bss : { *(.bss) }
}
If an orphan section (like set_sysinit_set) is now inserted just after
the __bss_start assignment, __bss_start will actually point to the start
of that orphan section, *not* to the start of the .bss section.
Unfortunately, something like this happened with our i386 kernel linker
script, and since sys/i386/i386/locore.s tries to zero .bss, it ended up
zeroing all the linker sets too, leading to a crash very soon after the
<--BOOT--> message.
To fix this, move the __bss_start symbol assignment *into* the .bss
section description, so there is no way a linker can then insert orphan
sections at that point. Also add a corresponding __bss_end symbol.
In addition, change sys/i386/i386/locore.s, so it clears from
__bss_start to __bss_end, instead of assuming that _edata is just
before .bss (which may not be true), and that _end is just after _bss
(which also may not be true).
This allows an i386 kernel linked with lld 7.0.0 to boot successfully.
configuring kernels for i386, amd64, and arm64.
The 'GEOM_PART_GPT' option was added to the DEFAULTS configuration
in r337967.
Approved by: re (kib@)
Reviewed by: ler@
Differential Revision: https://reviews.freebsd.org/D17458
Sponsored by: Netflix, Inc.
Belatedly add a comment to the amd64 pmap explaining why we initialize
the kernel pmap's resident page count.
Reviewed by: alc, kib
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17377
This reverts part of r333368. The attempt to clear DR6 was occuring
too soon as trapsignal() does not pause to let the debugger notice the
SIGTRAP and query DR6. The signal exchange does not occur until much
later during ast(). As a result, GDB was no longer recognizing
hardware breakpoints and watchpoints on x86.
In addition, any userland programs that want to inspect DR6 in a
SIGTRAP handler don't have a way to do this if we clear DR6 in the
exception handler.
Instead of relying on the kernel to clear DR6, debuggers will have to
explicitly clear it after a trace trap (which they needed to do on
older kernels anyway).
Reviewed by: kib
Approved by: re (delphij)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17319
This simplifies the runtime logic and reduces the number of
runtime-constant branches.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D16736
Since ifunc-capable linker is now required on i386, bring this code in
line with the amd64 counterpart.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D16736
Exposing max_offset and min_offset defines in public headers is
causing clashes with variable names, for example when building QEMU.
Based on the submission by: royger
Reviewed by: alc, markj (previous version)
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 1 week
Approved by: re (marius)
Differential revision: https://reviews.freebsd.org/D16881
Curpmap must be already valid when cpu_throw() is called, even for early
AP startup.
Suggested by: alc
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (marius)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16893
Add pmap_activate_boot() for i386, move the invocation on APs from MD
init_secondary() to x86 init_secondary_tail().
Suggested by: alc
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (marius)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16893
Revert r338177, r338176, r338175, r338174, r338172
After long consultations with re@, core members and mmacy, revert
these changes. Followup changes will be made to mark them as
deprecated and prent a message about where to find the up-to-date
driver. Followup commits will be made to make this clear in the
installer. Followup commits to reduce POLA in ways we're still
exploring.
It's anticipated that after the freeze, this will be removed in
13-current (with the residual of the drm2 code copied to
sys/arm/dev/drm2 for the TEGRA port's use w/o the intel or
radeon drivers).
Due to the impending freeze, there was no formal core vote for
this. I've been talking to different core members all day, as well as
Matt Macey and Glen Barber. Nobody is completely happy, all are
grudgingly going along with this. Work is in progress to mitigate
the negative effects as much as possible.
Requested by: re@ (gjb, rgrimes)
The boot-time ifunc resolver assumes that it only needs to apply
IRELATIVE relocations to PLT entries. With an upcoming optimization,
this assumption no longer holds, so add the support required to handle
PC-relative relocations targeting GNU_IFUNC symbols.
- Provide a custom symbol lookup routine that can be used in early boot.
The default lookup routine uses kobj, which is not functional at that
point.
- Apply all existing relocations during boot rather than filtering
IRELATIVE relocations.
- Ensure that we continue to apply ifunc relocations in a second pass
when loading a kernel module.
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16749
As discussed on the MLs drm2 conflicts with the ports' version and there
is no upstream for most if not all of drm. Both have been merged in to
a single port.
Users on powerpc, 32-bit hardware, or with GPUs predating Radeon
and i915 will need to install the graphics/drm-legacy-kmod. All
other users should be able to use one of the LinuxKPI-based ports:
graphics/drm-stable-kmod, graphics/drm-next-kmod, graphics/drm-devel-kmod.
MFC: never
Approved by: core@
became unused in FreeBSD 12.x as a side-effect of the NUMA-related
changes.)
Reviewed by: kib, markj
Discussed with: jeff, re@
Differential Revision: https://reviews.freebsd.org/D16825
The support for lazy pmap invalidations on i386 was removed in r281707.
This removes the constant for the IPI and stops accounting for it when
sizing the interrupt count arrays.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16801
- In configurations with a pseudo devices section, move 'device crypto'
into that section.
- Use a consistent comment. Note that other things common in kernel
configs such as GELI also require 'device crypto', not just IPSEC.
Reviewed by: rgrimes, cem, imp
Differential Revision: https://reviews.freebsd.org/D16775
Updates in the format described in section 9.11 of the Intel SDM can
now be applied as one of the first steps in booting the kernel. Updates
that are loaded this way are automatically re-applied upon exit from
ACPI sleep states, in contrast with the existing cpucontrol(8)-based
method. For the time being only Intel updates are supported.
Microcode update files are passed to the kernel via loader(8). The
file type must be "cpu_microcode" in order for the file to be recognized
as a candidate microcode update. Updates for multiple CPU types may be
concatenated together into a single file, in which case the kernel
will select and apply a matching update. Memory used to store the
update file will be freed back to the system once the update is applied,
so this approach will not consume more memory than required.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16370
There's no differene between VM_FREELIST_ISADMA and VM_FREELIST_LOWMEM
except for the default boundary (16MB on x86 and 256MB on MIPS, but
they are otherwise the same). We don't need both for any system we
support (there were some really old ARC systems that did have ISA/EISA
bus, but we never ran on them and they are too old to ever grow
support for).
Differential Review: https://reviews.freebsd.org/D16290
Do not use vm_map_remove() to release KVA back to the system. Because
kernel map entries do not have an associated VM object, with r336030
the vm_map_remove() call will not update the kernel page tables. Avoid
relying on the vm_map layer and instead update the pmap and release KVA
to the kernel arena directly in kmem_bootstrap_free().
Because the pmap updates will generally result in superpage demotions,
modify pmap_init() to insert PTPs shadowed by superpage mappings into
the kernel pmap's radix tree.
While here, port r329171 to i386.
Reported by: alc
Reviewed by: alc, kib
X-MFC with: r336505
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16426
code never sees FPU pcb flags not consistent with the hardware state.
This is uncovered by the eager FPU switch mode.
Analyzed, reviewed and tested by: gleb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
On i386 and amd64, add a vm_phys segment for physical memory used to
store the kernel binary and other preloaded data. This makes it
possible to free such memory back to the system once it is no longer
needed, e.g., when a preloaded kernel module is unloaded. Previously,
it would have remained unused.
Reviewed by: kib, royger
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16330
Without this, the support for transparent superpage promotion on i386
was left disabled.
Reviewed by: alc, kib
Differential Revision: https://reviews.freebsd.org/D16279
add support for explicitly requesting that pmap_enter() create a 2 or 4 MB
page mapping. (Essentially, this feature allows the machine-independent
layer to create superpage mappings preemptively, and not wait for automatic
promotion to occur.)
Export pmap_ps_enabled() to the machine-independent layer.
Add a flag to pmap_pv_insert_pde() that specifies whether it should fail or
reclaim a PV entry when one is not available.
Refactor pmap_enter_pde() into two functions, one by the same name, that is
a general-purpose function for creating PDE PG_PS mappings, and another,
pmap_enter_4mpage(), that is used to prefault 2 or 4 MB read- and/or
execute-only mappings for execve(2), mmap(2), and shmat(2).
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D16246
For example, fully construct the new PTE before entering the critical
section. This change is a stepping stone to psind == 1 support on i386.
Reviewed by: kib, markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D16188
Doing so ensures that all threads sharing the pmap have a consistent
view of the mapping. This fixes the problem described in the commit
log messages for r329254 without the overhead of an extra fault in the
common case. Once other pmap_enter() implementations are similarly
modified, the workaround added in r329254 can be removed, reducing the
overhead of CoW faults.
See also r335784 for amd64. The i386 implementation of pmap_enter()
already reused the PV entry from the old mapping.
Reviewed by: kib, markj
Tested by: pho
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16133
This restores counters(9) operation.
Revert r336024. Improve assert of pcpu size on x86.
Reviewed by: mmacy
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16163
Due to the way rtld creates mappings for the shared objects, each dso
causes unmap of at least three guard map entries. For instance, in
the buildworld load, this change reduces the amount of pmap_remove()
calls by 1/5.
Profiled by: alc
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16148
SMP systems by extending defined(SMP) to include defined(KLD_MODULE).
This is a regression issue after r335873 .
Discussed with: mmacy@
Sponsored by: Mellanox Technologies
- Change pcpu zone consumers to use a stride size of PAGE_SIZE.
(defined as UMA_PCPU_ALLOC_SIZE to make future identification easier)
- Allocate page from the correct domain for a given cpu.
- Don't initialize pc_domain to non-zero value if NUMA is not defined
There are some misconceptions surrounding this field. It is the
_VM_ NUMA domain and should only ever correspond to valid domain
values as understood by the VM.
The former slab size of sizeof(struct pcpu) was somewhat arbitrary.
The new value is PAGE_SIZE because that's the smallest granularity
which the VM can allocate a slab for a given domain. If you have
fewer than PAGE_SIZE/8 counters on your system there will be some
memory wasted, but this is obviously something where you want the
cache line to be coming from the correct domain.
Reviewed by: jeff
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15933
It is possible that a fictitious unmanaged userspace mapping of
superpage is created on x86, e.g. by pmap_object_init_pt(), with the
physical address outside the vm_page_array[] coverage.
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16085
physical address, which is readily available after sucessfull
vm_page_pa_tryrelock().
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16085
physical address, which is readily available after sucessfull
vm_page_pa_tryrelock().
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16085
returning NULL.
vm_fault_quick_hold_pages() can be legitimately called on userspace
mappings backed by fictitious pages created by unmanaged device and sg
pagers.
Note that other architectures pmap_extract_and_hold() might need
similar fix, but I postponed the examination.
Reported by: bde
Discussed with: alc
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D16085
- inline atomics in modules on i386 and amd64 (they were always
inline on other arches)
- allow modules to opt in to inlining locks by specifying
MODULE_TIED=1 in the makefile
Reviewed by: kib
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16079
The Linux compatibility code was converting the version number (e.g.
2.6.32) in two different ways and then comparing the results.
The linux_map_osrel() function converted MAJOR.MINOR.PATCH similar to
what FreeBSD does natively. I.e. where major=v0, minor=v1, and patch=v2
v = v0 * 1000000 + v1 * 1000 + v2;
The LINUX_KERNVER() macro, on the other hand, converted the value with
bit shifts. I.e. where major=a, minor=b, and patch=c
v = (((a) << 16) + ((b) << 8) + (c))
The Linux kernel uses the later format via the KERNEL_VERSION() macro in
include/generated/uapi/linux/version.h
Fix is to use the LINUX_KERNVER() macro in linux_map_osrel() as well as
in the .trans_osrel functions.
PR: 229209
Reviewed by: emaste, cem, imp (mentor)
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15952
Existing linuxulator platforms (i386, amd64) support legacy syscalls,
such as non-*at ones like open, but arm64 and other new platforms do
not.
Wrap these in #ifdef LINUX_LEGACY_SYSCALLS, #defined in the MD linux.h
files. We may need finer grained control in the future but this is
sufficient for now.
Reviewed by: andrew
Sponsored by: Turing Robotic Industries
Differential Revision: https://reviews.freebsd.org/D15237
The break() system call was renamed (several times) starting in v3
AT&T UNIX when C was invented and break was a language keyword. The
last vestage of a need for it to be called something else (eg obreak)
was removed in r225617 which consistantly prefixed all syscall
implementations.
Reviewed by: emaste, kib (older version)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15638
Give up and remove the almost useless informational message reporting
that device not available exception occured while our state tracking
indicates the current CPU has FPU context loaded for the current
thread.
It seems that this is recurring bug with some VM monitors.
Sponsored by: The FreeBSD Foundation
Most kernel memory that is allocated after boot does not need to be
executable. There are a few exceptions. For example, kernel modules
do need executable memory, but they don't use UMA or malloc(9). The
BPF JIT compiler also needs executable memory and did use malloc(9)
until r317072.
(Note that a side effect of r316767 was that the "small allocation"
path in UMA on amd64 already returned non-executable memory. This
meant that some calls to malloc(9) or the UMA zone(9) allocator could
return executable memory, while others could return non-executable
memory. This change makes the behavior consistent.)
This change makes malloc(9) return non-executable memory unless the new
M_EXEC flag is specified. After this change, the UMA zone(9) allocator
will always return non-executable memory, and a KASSERT will catch
attempts to use the M_EXEC flag to allocate executable memory using
uma_zalloc() or its variants.
Allocations that do need executable memory have various choices. They
may use the M_EXEC flag to malloc(9), or they may use a different VM
interfact to obtain executable pages.
Now that malloc(9) again allows executable allocations, this change also
reverts most of r317072.
PR: 228927
Reviewed by: alc, kib, markj, jhb (previous version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15691
A call to npxsave() in the exception trampolines was not relocated.
This call to a garbage address usually paniced when made, but it is only
made when the thread has used an FPU recently, and this is not the usual
case.
PR: 228755
Reviewed by: kib
pmc_process_interrupt takes 5 arguments when only 3 are needed.
cpu is always available in curcpu and inuserspace can always be
derived from the passed trapframe.
While facially a reasonable cleanup this change was motivated
by the need to workaround a compiler bug.
core2_intr(cpu, tf) ->
pmc_process_interrupt(cpu, ring, pmc, tf, inuserspace) ->
pmc_add_sample(cpu, ring, pm, tf, inuserspace)
In the process of optimizing the tail call the tf pointer was getting
clobbered:
(kgdb) up
at /storage/mmacy/devel/freebsd/sys/dev/hwpmc/hwpmc_mod.c:4709
4709 pmc_save_kernel_callchain(ps->ps_pc,
(kgdb) up
1205 error = pmc_process_interrupt(cpu, PMC_HR, pm, tf,
resulting in a crash in pmc_save_kernel_callchain.
- increase pmc cpuid field from 8 to 12 bits
- add cpuid version string to initialize entry in the log
so that filter can identify which counter index an
event name maps to
- GC unused config flags
- make fixed counter assignment more robust as well as the
changes needed to be properly identified for filter
file in /sys/conf, so was unavailable in configurations that don't use
modules, and was not testable or notable in NOTES. Its normal
configuration (not using a module) is still silently deprecated in
aout(4) by not mentioning it there.
Update i386 NOTES for COMPAT_AOUT. It is not i386-only, or even very MD.
Sort its entry better.
Finish gzip configuration (but not support) for amd64. gzip is really
gzipped aout. It is currently broken even for i386 (a call to vm fails).
amd64 has always attempted to configure and test it, but it depends on
COMPAT_AOUT (as noted). The bug that it depends on unconfigured files
was not detected since it is configured as a device. All other optional
image activators are configured properly using an option.
time, especially for SMP. If configured, it turns itself on at boot
time for calibration, so is fragile even if never otherwise used.
Both types of kernel profiling were supposed to use a global spinlock
in the SMP case. If hi-res profiling is configured (but not necessarily
used), this was supposed to be optimized by only using it when
necessary, and slightly more efficiently, in asm. But it was not done
at all for mcount entry where it is necessary. This caused crashes
in the SMP case when either type of profiling was enabled. For mcount
exit, it only caused wrong times. The times were wrongest with an
i8254 timer since using that requires exclusive access to the hardware.
The i8254 timer was too slow to use here 20 years ago and is much less
usable now, but it is the default for the SMP case since TSCs weren't
invariant when SMP was new. Do the locking in all hi-res SMP cases for
simplicity.
Calibration uses special asms, and the clobber lists in these were sort
of inverted. They contained the arg and return registers which are not
clobbered, but on amd64 they didn't contain the residue of the call-used
registers which may be clobbered (%r10 and %r11). This usually caused
hangs at boot time. This usually affected even the UP case.
kernel profiling remains broken).
memmove() was broken using ALTENTRY(). ALTENTRY() is only different from
ENTRY() in the profiling case, and its use in that case was sort of
backwards. The backwardness magically turned memmove() into memcpy()
instead of completely breaking it. Only the high resolution parts of
profiling itself were broken. Use ordinary ENTRY() for memmove().
Turn bcopy() into a tail call to memmove() to reduce complications.
This gives slightly different pessimizations and profiling lossage.
The pessimizations are minimized by not using a frame pointer() for
bcopy().
Calls to profiling functions from exception trampolines were not
relocated. This caused crashes on the first exception. Fix this using
function pointers.
Addresses of exception handlers in trampolines were not relocated. This
caused unknown offsets in the profiling data. Relocate by abusing
setidt_disp as for pmc although this is slower than necessary and
requires namespace pollution. pmc seems to be missing some relocations.
Stack traces and lots of other things in debuggers need similar relocations.
Most user addresses were misclassified as unknown kernel addresses and
then ignored. Treat all unknown addresses as user. Now only user
addresses in the kernel text range are significantly misclassified (as
known kernel addresses).
The ibrs functions didn't preserve enough registers. This is the only
recent breakage on amd64. Although these functions are written in
asm, in the profiling case they call profiling functions which are
mostly for the C ABI, so they only have to save call-used registers.
They also have to save arg and return registers in some cases and
actually save them in all cases to reduce complications. They end up
saving all registers except %ecx on i386 and %r10 and %r11 on amd64.
Saving these is only needed for 1 caller on each of amd64 and i386.
Save them there. This is slightly simpler.
Remove saving %ecx in handle_ibrs_exit on i386. Both handle_ibrs_entry
and handle_ibrs_exit use %ecx, but only the latter needed to or did
save it. But saving it there doesn't work for the profiling case.
amd64 has more automatic saving of the most common scratch registers
%rax, %rcx and %rdx (its complications for %r10 are from unusual use
of %r10 by SYSCALL). Thus profiling of handle_ibrs_exit_rs() was not
broken, and I didn't simplify the saving by moving the saving of these
registers from it to the caller.
Intel now provides comprehensive tables for all performance counters
and the various valid configuration permutations as text .json files.
Libpmc has been converted to use these and hwpmc_core has been greatly
simplified by moving to passthrough of the table values.
The one gotcha is that said tables don't support pentium pro and and pentium
IV. There's very few users of hwpmc on _amd64_ kernels on new hardware. It is
unlikely that anyone is doing low level optimization on 15 year old Intel
hardware. Nonetheless, if someone feels strongly enough to populate the
corresponding tables for p4 and ppro I will reinstate the files in to the
build.
Code for the K8 counters and !x86 architectures remains unchanged.
This is a follow-up to r321483, which disabled -Wmacro-redefined for
some lib/msun tests.
If an application included both fenv.h and ieeefp.h, several macros such
as __fldcw(), __fldenv() were defined in both headers, with slightly
different arguments, leading to conflicts.
Fix this by putting all the common macros in the machine-specific
versions of ieeefp.h. Where needed, update the arguments in places
where the macros are invoked.
This also slightly reduces the differences between the amd64 and i386
versions of ieeefp.h.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D15633
pmap_is_prefaultable() and pmap_incore(), pushing the number of
shootdown IPIs back to the 3/1 kernel.
Benchmarked by: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
Create yet another temporal pte mapping routine pmap_pte_quick3(),
which is the copy of the pmap_pte_quick() and relies on the
pvh_global_lock to protect the frame. It accounts into the same
counters as pmap_pte_quick(). It is needed since pmap_copy() uses
pmap_pte_quick() already, and since a user pmap is no longer current
pmap.
pmap_copy() still provides the advantage for real-world workloads
involving lot of forks where processes do not exec immediately.
Benchmarked by: bde
Sponsored by: The FreeBSD Foundation
While at it add missing _acq_ and _rel_ variants for 64-bit atomic
operations under i386.
Reviewed by: kib @
MFC after: 1 week
Sponsored by: Mellanox Technologies
In particular, stop using pmap_pte() to read non-promoted pte while
walking the page table. pmap_pte() needs to shoot down the kernel
mapping globally which causes IPI broadcast. Since
pmap_extract_and_hold() is used for slow copyin(9), it is very
significant hit for the 4/4 kernels.
Instead, create single purpose per-processor page frame and use it to
locally map page table page inside the critical section, to avoid
reuse of the frame by other thread if context switched.
Measurement demostrated very significant improvements in any load that
utilizes copyin/copyout.
Found and benchmarked by: bde
Sponsored by: The FreeBSD Foundation
The TSC-s are checked and synchronized only if they were good
originally. That is, invariant, synchronized, etc.
This is necessary on an AMD-based system where after a wakeup from STR I
see that BSP clock differs from AP clocks by a count that roughly
corresponds to one second. The APs are in sync with each other. Not
sure if this is a hardware quirk or a firmware bug.
This is what I see after a resume with this change:
SMP: passed TSC synchronization test after adjustment
acpi_timer0: restoring timecounter, ACPI-fast -> TSC-low
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15551
Make memmove the primary interface, but have bcopy be an alternative
entry point that jumps into memmove. This will slightly pessimize
bcopy calls, but those are about to get much rarer. Return dst always,
but it will be ignored by bcopy callers. We can remove just the alt
entry point if we ever remove bcopy entirely.
Differential Revision: https://reviews.freebsd.org/D15374
Instead, construct an auxargs array and copy it out all at once.
Use an array of Elf_Auxinfo rather than pairs of Elf_Addr * to represent
the array. This is the correct type where pairs of words just happend
to work. To reduce the size of the diff, AUXARGS_ENTRY is altered to act
on this array rather than introducing a new macro.
Return errors on copyout() and suword() failures and handle them in the
caller.
Incidentally fixes AT_RANDOM and AT_EXECFN in 32-bit linux on amd64
which incorrectly used AUXARG_ENTRY instead of AUXARGS_ENTRY_32
(now removed due to the use of proper types).
Reviewed by: kib
Comments from: emaste, jhb
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15485
We certainly should clear PSL_T when calling the SIGTRAP signal
handler, which is already done by all x86 sendsig(9) ABI code. On the
other hand, there is no obvious reason why PSL_T needs to be cleared
when returning from the signal handler. For instance, Linux allows
userspace to set PSL_T and keep tracing enabled for the desired
period. There are userspace programs which would use PSL_T if we make
it possible, for instance sbcl.
Remember if PSL_T was set by PT_STEP or PT_SETSTEP by mean of TDB_STEP
flag, and only clear it when the flag is set.
Discussed with: Ali Mashtizadeh
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D15054
r334005: add pc_ibpb_set as it is now referenced by common code
(although presumably not needed on i386 since it has been there
since the first spectre mitigation work on amd64)
r334009: there is no amd64 rflags -> i386 eflags
- Add constants for fields in DR6 and the reserved fields in DR7. Use
these constants instead of magic numbers in most places that use DR6
and DR7.
- Refer to T_TRCTRAP as "debug exception" rather than a "trace trap"
as it is not just for trace exceptions.
- Always read DR6 for debug exceptions and only clear TF in the flags
register for user exceptions where DR6.BS is set.
- Clear DR6 before returning from a debug exception handler as
recommended by the SDM dating all the way back to the 386. This
allows debuggers to determine the cause of each exception. For
kernel traps, clear DR6 in the T_TRCTRAP case and pass DR6 by value
to other parts of the handler (namely, user_dbreg_trap()). For user
traps, wait until after trapsignal to clear DR6 so that userland
debuggers can read DR6 via PT_GETDBREGS while the thread is stopped
in trapsignal().
Reviewed by: kib, rgrimes
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15189
This turns on support for kernel dump encryption and compression, and
netdump. arm and mips platforms are omitted for now, since they are more
constrained and don't benefit as much from these features.
Reviewed by: cem, manu, rgrimes
Tested by: manu (arm64)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D15465
is executed on the right stack already. No copy from the entry stack
to the kstack must be performed for vm86 bios call code to function.
To access the pcb flags on kernel entry, unconditionally switch to
kernel address space if vm86 mode is detected.
This fixes very early vm86 bios calls, typically done when boot is
performed by boot2 without loader, and kernel falls back to BIOS calls
to get SMAP.
Reported by: bde
Sponsored by: The FreeBSD Foundation
PCB_VM86CALL pcb flag not set should be treated same as return to
userspace.
Most important, the address space must be switched. This fixes
usermode vm86 operations after the 4/4 split.
Sponsored by: The FreeBSD Foundation
exception code is copied to the trampoline.
The correct value is then copied to trampoline automatically, so
tramp_idleptd_reloced can be eliminated.
This will allow to use the same exception entry code to handle traps
from vm86 bios calls on early boot stage, as after the trampoline is
configured.
Sponsored by: The FreeBSD Foundation
Record common_tssd, the descriptor to be written in GDT to point to
the common TSS, before LTR is executed. The LTR instruction sets the
loaded descriptor type to 386 TSS busy, which traps on reloads.
Sponsored by: The FreeBSD Foundation
Since pop %ss/mov %ss instructions defer all interrupts and exceptions
for the next instruction, it is possible that the userspace watchpoint
trap executes on the first instruction of the kernel entry for
syscall/bpt.
In this case, DB# should be treated similarly to NMI: on amd64 we must
always load GSBASE even if the trap comes from kernel mode, and load
the kernel page table root into %cr3. Moreover, the trap must
use the dedicated stack, because we are still on the user stack when
trapped on syscall entry.
For i386, we must reload %cr3. The syscall instruction is not configured,
so there is no issue with executing on user stack when trapping.
Due to some CPU erratas it is not always possible to detect that the
userspace watchpoint triggered by inspecting %dr6. In trap(), compare the
trap %rip with the known unsafe entry points and if matched pretend that
the watchpoint did not fire at all.
Thank you to the MSRC Incident Response Team, and in particular Greg
Lenti and Nate Warfield, for coordinating the response to this issue
across multiple vendors.
Thanks to Computer Recycling at The Working Center of Kitchener for
making hardware available to allow us to test the patch on additional
CPU families.
Reviewed by: jhb
Discussed with: Matthew Dillon
Tested by: emaste
Sponsored by: The FreeBSD Foundation
Security: CVE-2018-8897
Security: FreeBSD-SA-18:06.debugreg
Required MD bits are only provided for x86.
Reviewed by: jhb (previous version, as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D13838
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
Dumpers may wish to print messages from an initialization hook; this
change ensures that such messages aren't mixed with output from the
generic dump code.
MFC after: 1 week
Use proper method to access userspace. For now, only the slow copyout
path is implemented.
Reported and tested by: tijl (previous version)
Sponsored by: The FreeBSD Foundation
Remove auxarg_size as it was only used once right after a confusing
assignment in each of the variants of exec_copyout_strings().
Reviewed by: emaste
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15123
This will allow to hook a ddb script to "kdb.enter.trap" event.
Previously there was no specific name for this event, so it could only
be handled by either "kdb.enter.unknown" or "kdb.enter.default" hooks.
Both are very unspecific.
Having a specific event is useful because the fatal trap condition is
very similar to panic but it has an additional property that the current
stack frame is the frame where the trap occurred. So, both a register
dump and a stack bottom dump have additional information that can help
analyze the problem.
I have added the event only on architectures that have trap_fatal()
function defined. I haven't looked at other architectures. Their
maintainers can add support for the event later.
Sample script:
kdb.enter.trap=bt; show reg; x/aS $rsp,20; x/agx $rsp,20
Reviewed by: kib, jhb, markj
MFC after: 11 days
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D15093
