to a clnt_create() call even when it is actually a program
version mismatch.
Normally the server is supposed to return RPC_PROGVERSMISMATCH
when it supports the specified program but not support
the specified version. Some filers return RPC_PROGNOTREGISTERED
to RQUOTA v2 calls and FreeBSD does not retry with the old
v1 calls. This change fixes this failure scenario.
Submitted by: Jian-Bo Liao
PR: 236179
When a file is unlinked, the denode is not reclaimed until the last
reference is dropped, but the directory entry is immediately up for reuse.
This is a problem later when createde goes to grab a denode for the newly
created entry -- we search the hash and find a dead denode, then return that
without even bumping the reference count and the data later gets truncated
when the the last reference to the unlinked file is dropped.
This manifested itself as a broken in-place strip(1) on msdosfs. elfcopy
will do a sequence incredibly roughly like this:
open("/mnt/foo", ...) => fd 3
mmap()
unlink("/mnt/foo")
open("/mnt/foo", ...) => fd 4
write(4, ...)
close(4)
close(3)
and the resulting file would be truncated, but the write succeeded, as long
as a reference to the unlinked file had not been closed.
Some archaeology indicates that this bug has likely existed since msdosfs
was converted to use vfs_hash instead of a home rolled hash implementation
in r143570. Prior to that point, the hashget implementation would do a
refcnt check while searching and explicitly only return a denode with
de_refcnt != 0. vfs_hash did not yet have the callback that it does today,
so this slipped away and did not come back when it later grew that
functionality.
The comment indicating that we want to skip these denodes has been updated
to reflect where this is actually done. My repo-diving session seems to
indicate that the refcnt check was likely never actually below the comment,
to be pedantic, but instead a detail wrapped up in the hashget
implementation since the beginning of its inclusion into FreeBSD.
This bug was the cause behind the issue addressed in r352557.
Reported by: jhibbits
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21731
It's not uncommon these days for the terminals attached to serial consoles
to support ANSI escape sequences. However, we assume escape sequences may
break some serial consoles and default to not using them when boot_serial or
boot_multicons (or if console contains "comconsole" in the forth loader) for
broader compatibility. We also have loader_color which can be explicitly set
to "NO" to disable the use of ANSI escape sequences.
The problem is that loader_color=YES gets ignored when boot_serial=YES or
boot_multicons=YES (or when console contains "comconsole" in the forth
loader).
To fix, the existing default behavior remains unchanged when loader_color is
unset, loader_color=NO explicitly disables the use of ANSI escape sequences
still, and the change is that loader_color=YES can now be used to explicitly
allow ANSI escapes when a serial console is enabled.
Submitted by: Ryan Moeller <ryan@ixsystems.com>
Reviewed by: tsoome (forth), kevans (lua)
MFC after: 1 week
Sponsored by: iXsystems, Inc. (Ryan)
Differential Revision: https://reviews.freebsd.org/D21732
Summary:
Install's strip capability, by way of strip(1), doesn't seem to work
correctly on msdosfs, and instead ends up truncating the resulting
binary to 0-length. As a workaround, don't strip ubldr(8). This
fixes installworld on Book-E ubldr-based platforms, which prior to this
would need to manually install ubldr separately after installworld, in
order to have a functional ubldr.
The same thing could be done on PowerNV platforms that use msdosfs /boot
volumes, since loader and loader.kboot, etc, all get truncated to 0 on
install. However, PowerNV does not use loader, instead loading from
petitboot, so it's not really necessary at this time.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D21725
above 1Kbyte. It might look like some XHCI(4) controllers do not
support when the USB control transfer is split using a link TRB. The
next NORMAL TRB after the link TRB is simply failing with XHCI error
code 4. The quirk ensures we allocate a 64Kbyte buffer so that the
data stage TRB is not broken with a link TRB.
Found at: EuroBSDcon 2019
MFC after: 1 week
Sponsored by: Mellanox Technologies
libusb. This is useful for speeding up large data transfers while reducing
the interrupt rate.
Found at: EuroBSDcon 2019
MFC after: 1 week
Sponsored by: Mellanox Technologies
r348628 added a definition of NT_GNU_BUILD_ID. Some software (Valgrind)
also expects a #define for the note name (ELF_NOTE_GNU) in the case that
NT_GNU_BUILD_ID is defined.
PR: 239669
Reported by: Yuichiro NAITO
Sponsored by: The FreeBSD Foundation
Event: EuroBSDCon FreeBSD DevSummit 2019
Allocate ioat->ring memory from the device domain.
Schedule ioat->poll_timer to the first CPU of the device domain.
According to pcm-numa tool from intel-pcm port, this reduces number of
remote DRAM accesses while copying data by 75%. And unless it is a noise,
I've noticed some speed improvement when copying data to other domain.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Unfortunately though the original tarball supports this in ./configure
(for Linux), to fully support disabling of mlockall() by default requires
a little extra help otherwise the following is logged in syslog:
Cannot set RLIMIT_MEMLOCK: Operation not permitted
MFC after: 2 weeks
X-MFC with: r352304
message:
On non-x86 systems, use "quarterly" packages.
x86 architectures have "latest" package builds on stable/*, so keep using
those (they'll get switched over to "quarterly" during releases).
The original commit was a direct commit to stable/12, as at the time it
was presumed it would not be necessary for head. However, when it is time
to create a releng branch or switch from PRERELEASE/STABLE to BETA/RC, the
pkg(7) Makefile needs further adjusting. This commit includes those
further adjustments, evaluating the BRANCH variable from release/Makefile
to determine the pkg(7) repository to use.
MFC after: immediate (if possible)
Sponsored by: Rubicon Communications, LLC (Netgate)
There is no trivial way to mark single libarchive test skip currently so just
add it to BROKEN_TESTS for now.
PR: 240683
Sponsored by: The FreeBSD Foundation
igor follows American style guides in the belief that abbreviations i.e.
and e.g. are always followed by a comma. Make that change now so that
future updates to freebsd-update.8 do not complain about this.
Submitted by: grembo
Event: EuroBSDCon Norway FreeBSD DevSummit
it wasn't taking the IP level options into account. This patch fixes this.
In addition, it also corrects a KASSERT and adds protection code to assure
that the IP header chain and the TCP head fit in the first fragment as
required by RFC 7112.
Reviewed by: rrs@
MFC after: 3 days
Sponsored by: Nertflix, Inc.
Differential Revision: https://reviews.freebsd.org/D21666
contains Hop-by-Hop options, the mbuf chain is potentially changed in
ip6_hopopts_input(), called by ip6_input_hbh().
This can happen, because of the the use of IP6_EXTHDR_CHECK, which might
call m_pullup().
So provide the updated pointer back to the called of ip6_input_hbh() to
avoid using a freed mbuf chain in`ip6_input()`.
Reviewed by: markj@
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D21664
It was incorrect with respect to swapping dataset IDs both in the
on-disk ZAP object and the in-memory queue.
In both cases, if only ds1 was already present, then it would be first
replaced with ds2 and then ds2 would be replaced back with ds1. Also,
both cases did not properly handle a situation where both ds1 and ds2
are already queued. A duplicate insertion would be attempted and its
failure would result in a panic.
This change has also been submitted to ZoL as zfsonlinux/zfs@dd262c9
PR: 239566
Reported by: pascal.guitierrez@gmail.com
MFC after: 4 days
Sponsored by: CyberSecure
If there is an attempt to switch from a process-owned VT to a closed VT,
then vt(4) first requests the process to release its VT and only then
realizes that the target VT is closed and, so, the switch is not
possible. So, the driver does not actually do any switch, but at the
same time the owning process is not notified about that and it does not
re-acquire the VT.
This change adds an early check for the target VT state, so that the
switch can be refused before the process coordination dance.
On top of that, the code now checks for a failure of vt_window_switch()
and calls vt_window_postswitch() for the current VT if it is in the
process mode.
Test Plan:
- configure VT1 - VT8 (ttyv0 - ttyv7) to be text consoles (run getty)
- configure VT9 (ttyv8) to rn X server
- make sure that the X server configuration allows VT switching
- leave VT10 - VT12 unconfigured
- while in the X server press Ctrl+Alt+F10
- without the patch, observe strange screen content and problems with
keyboard input
- with the patch, observe that nothing happens
The problem has been observed and the fix has been tested with an nVidia
graphics card and the proprietary nvidia driver.
Not sure if that matters.
Reviewed by: ray
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21704
Use __func__ to avoid this issue in the future.
Submitted by: Wuyang Chung <wuyang.chung1@gmail.com>
Reviewed by: markj, emaste
Obtained from: https://github.com/freebsd/freebsd/pull/410
It is useful to have some tests for page fault signals.
More tests would be useful but creating the conditions (such as various
kinds of running out of memory and I/O errors) is more complicated.
The tests page_fault_signal__bus_objerr_1 and
page_fault_signal__bus_objerr_2 depend on https://reviews.freebsd.org/D21566
before they can pass.
PR: 211924
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D21624
BERI stands for Bluespec Extensible RISC Implementation, based on MIPS.
BERI has not implemented standard MIPS perfomance monitoring counters,
instead it provides statistical counters.
BERI statcounters have a several limitations:
- They can't be written
- They don't support start/stop operation
- None of hardware interrupt is provided on a counter overflow.
So make it separate to hwpmc_mips module and support process/system
counting mode only.
Sponsored by: DARPA, AFRL
Note that old pkg will failed to build after this. A recent ports tree (one
providing pkg 1.12+) is required to build. Older already built pkg, should
continue working as expected
PR: 238797
Exp run by: antoine
Reviewed by: cem
Approved by: cem
Differential Revision: https://reviews.freebsd.org/D20752
Parts of the fusefs tests trigger a bug in current versions of llvm: IR
representation of some routine for the MIPS targets is a function with a
large number of arguments. This then leads the compiler on an hour+ long
goose chase, which is OK if you build the current tree but less-so if you're
trying external toolchain or doing a universe build involving mips when it
eventually gets switched over to LLVM.
Better, accurate details can be found in LLVM PR43263.
BFD appears to silently truncate 0xffffffff80800000 when it processes the
ldscript for 32-bit mips, but LLD chokes on it as the linker script tries to
place elements above 32-bit range. It's unclear to me if silent truncation
is kosher or not and whether this patch is really what we want to do, but it
is one approach at least.
Reviewed by: imp, mizhka
Differential Revision: https://reviews.freebsd.org/D21487
log daemon facility now that daemon(8) has syslog support which defaults to
daemon facility, info priority
Reviewed by: bapt
Approved by: bapt
Differential Revision: https://reviews.freebsd.org/D21561
The ioctl(2) is intended to provide more details about the cause of
the down for the link.
Eventually we might define a comprehensive list of codes for the
situations. But interface also allows the driver to provide free-form
null-terminated ASCII string to provide arbitrary non-formalized
information. Sample implementation exists for mlx5(4), where the
string is fetched from firmware controlling the port.
Reviewed by: hselasky, rrs
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21527
node lock when shrinking.
This is similar to r252528, applied to the above commit.
Apparently there is a race which makes necessary at least to keep the
n_size and pager size consistent when extending. Current suspect is
that iod threads perform vnode_pager_setsize() without taking the
vnode lock, which corrupts the file content.
Reported and tested by: Masachika ISHIZUKA <ish@amail.plala.or.jp>
Discussed with: rmacklem (related issues)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
