Commit Graph

105 Commits

Author SHA1 Message Date
Bill Paul
1088f6c7c1 Spruce up the ADMtek driver: conver to newbus, miibus and add support
for the AN985 "Centaur" chip, which is apparently the next genetation
of the "Comet." The AN985 is also a tulip clone and is similar to the
AL981 except that it uses a 99C66 EEPROM and a serial MII interface
(instead of direct access to the PHY registers).

Also updated various documentation to mention the AN985 and created
a loadable module.

I don't think there are any cards that use this chip on the market yet:
the datasheet I got from ADMtek has boxes with big X's in them where the
diagrams should be, and the sample boards I got have chips without any
artwork on them.
1999-09-22 05:07:51 +00:00
Bill Paul
e5a9fd5435 This commit adds driver support for PCI fast ethernet NICs based on
the Davicom DM9100 and DM9102 chipsets, including the Jaton Corporation
XPressNet. Datasheet is available from www.davicom8.com.

The DM910x chips are still more tulip clones. The API is reproduced
pretty faithfully, unfortunately the performance is pretty bad. The
transmitter seems to have a lot of problems DMAing multi-fragment
packets. The only way to make it work reliably is to coalesce transmitted
packets into a single contiguous buffer. The Linux driver (written by
Davicom) actually does something similar to this. I can't recomment this
NIC as anything more than a "connectivity solution."

This driver uses newbus and miibus and is supported on both i386
and alpha platforms.
1999-09-06 06:14:30 +00:00
Bill Paul
9555e59a1e This commit adds driver support for the Silicon Integrated Systems
SiS 900 and SiS 7016 PCI fast ethernet chipsets. Full manuals for the
SiS chips can be found at www.sis.com.tw.

This is a fairly simple chipset. The receiver uses a 128-bit multicast
hash table and single perfect entry for the station address. Transmit and
receive DMA and FIFO thresholds are easily tuneable. Documentation is
pretty decent and performance is not bad, even on my crufty 486. This
driver uses newbus and miibus and is supported on both the i386 and
alpha architectures.
1999-09-05 21:01:03 +00:00
Jordan K. Hubbard
3910e95363 Oh crud, did I ever screw the pooch! Rather than sync this with -stable,
I backed-out the changes in -current and didn't touch stable at all (I
thought I had my patch order reversed, not what actually happened).
AIEEE!  I can't even blame the crack for this one since I broke my
crack pipe a few weeks ago.  I think sleep deprivation gets the blame
for this one.

Medal for noticing this one goes to:	Jim Bloom <bloom@acm.org>
1999-09-02 00:51:16 +00:00
Jordan K. Hubbard
d03dcaa779 MFC: Catch 3.2-stable sysinstall up to 4.0-current level functionality,
bringing in DHCP support.  The only thing I left out were Poul-Henning's
newfs changes since I'm not sure if he's brought the rest of that support
into -stable yet.  If it turns out that this is the case, I'll MFC those
changes too.
1999-09-01 04:29:30 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Bill Paul
23e4757cd7 This commit adds device driver support for the Sundance Technologies ST201
PCI fast ethernet controller. Currently, the only card I know that uses
this chip is the D-Link DFE-550TX. (Don't ask me where to buy these: the
only cards I have are samples sent to me by D-Link.)

This driver is the first to make use of the miibus code once I'm sure
it all works together nicely, I'll start converting the other drivers.

The Sundance chip is a clone of the 3Com 3c90x Etherlink XL design
only with its own register layout. Support is provided for ifmedia,
hardware multicast filtering, bridging and promiscuous mode.
1999-08-21 18:34:58 +00:00
Bill Paul
691c152864 This commit adds device driver support for Adaptec Duralink PCI fast
ethernet controllers based on the AIC-6915 "Starfire" controller chip.
There are single port, dual port and quad port cards, plus one 100baseFX
card. All are 64-bit PCI devices, except one single port model.

The Starfire would be a very nice chip were it not for the fact that
receive buffers have to be longword aligned. This requires buffer
copying in order to achieve proper payload alignment on the alpha.
Payload alignment is enforced on both the alpha and x86 platforms.
The Starfire has several different DMA descriptor formats and transfer
mechanisms. This driver uses frame descriptors for transmission which
can address up to 14 packet fragments, and a single fragment descriptor
for receive. It also uses the producer/consumer model and completion
queues for both transmit and receive. The transmit ring has 128
descriptors and the receive ring has 256.

This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus
so that it can be compiled as a loadable kernel module. Support for BPF
and hardware multicast filtering is included.
1999-07-25 04:32:50 +00:00
Jordan K. Hubbard
9df36b4d0d The matcd driver is acting strange (returning a successful open even
when it fails).  Disable it in sysinstall for now.
1999-07-20 08:47:35 +00:00
Bill Paul
3ebb090530 This commit adds driver support for the SysKonnect SK-984x series
gigabit ethernet adapters. This includes two single port cards
(single mode and multimode fiber) and two dual port cards (also single
mode and multimode fiber). SysKonnect is currently the only
vendor with a dual port gigabit ethernet NIC.

The ports on dual port adapters are treated as separate network
interfaces. Thus, if you have an SK-9844 dual port SX card, you
should have both sk0 and sk1 interfaces attached. Dual port cards
are implemented using two XMAC II chips connected to a single
SysKonnect GEnesis controller. Hence, dual port cards are really
one PCI device, as opposed to two separate PCI devices connected
through a PCI to PCI bridge. Note that SysKonnect's drivers use
the two ports for failover purposes rather that as two separate
interfaces, plus they don't support jumbo frames. This applies to
their Linux driver too. :)

Support is provided for hardware multicast filtering, BPF and
jumbo frames. The SysKonnect cards support TCP checksum offload
however this feature is not currently enabled (hopefully it will
be once we get checksum offload support).

There are still a few things that need to be implemeted, like
the ability to communicate with the on-board LM80 voltage/temperature
monitor, but I wanted to get the driver under CVS control and into
-current so people could bang on it.

A big thanks for SysKonnect for making all their programming info
for these cards (and for their FDDI and token ring cards) available
without NDA (see www.syskonnect.com).
1999-07-09 04:30:09 +00:00
Poul-Henning Kamp
2cde7060d5 update fla related entries. 1999-07-06 20:40:22 +00:00
Michael Haro
582913b94e wcd -> acd
Submitted by:	 Ruslan Ermilov <ru@ucb.crimea.ua>
1999-07-03 05:42:38 +00:00
Mark Murray
1a95b917f0 Add bits of PAO that are non-controversial.
Submitted by: Tatsumi HOSOKAWA
1999-06-17 19:04:56 +00:00
Jordan K. Hubbard
0550320175 Do a clean-up pass on error/warning messages. 1999-05-27 10:32:50 +00:00
Bill Paul
ab431312b4 This commit adds driver support for PCI fast ethernet cards based on the
ADMtek AL981 "Comet" chipset. The AL981 is yet another DEC tulip clone,
except with simpler receive filter options. The AL981 has a built-in
transceiver, power management support, wake on LAN and flow control.
This chip performs extremely well; it's on par with the ASIX chipset
in terms of speed, which is pretty good (it can do 11.5MB/sec with TCP
easily).

I would have committed this driver sooner, except I ran into one problem
with the AL981 that required a workaround. When the chip is transmitting
at full speed, it will sometimes wedge if you queue a series of packets
that wrap from the end of the transmit descriptor list back to the
beginning. I can't explain why this happens, and none of the other tulip
clones behave this way. The workaround this is to just watch for the end
of the transmit ring and make sure that al_start() breaks out of its
packet queuing loop and waiting until the current batch of transmissions
completes before wrapping back to the start of the ring. Fortunately, this
does not significantly impact transmit performance.

This is one of those things that takes weeks of analysis just to come
up with two or three lines of code changes.
1999-05-21 04:37:48 +00:00
Bill Paul
d02c233129 Add driver support for gigabit ethernet adapters based on the Alteon
Networks Tigon 1 and Tigon 2 chipsets. There are a _lot_ of OEM'ed
gigabit ethernet adapters out there which use the Alteon chipset so
this driver covers a fair amount of hardware. I know that it works with
the Alteon AceNIC, 3Com 3c985 and Netgear GA620, however it should also
work with the DEC/Compaq EtherWORKS 1000, Silicon Graphics Gigabit
ethernet board, NEC Gigabit Ethernet board and maybe even the IBM and
and Sun boards. The Netgear board is the cheapest (~$350US) but still
yields fairly good performance.

Support is provided for jumbo frames with all adapters (just set the
MTU to something larger than 1500 bytes), as well as hardware multicast
filtering and vlan tagging (in conjunction with the vlan support in
-current, which I should merge into -stable soon). There are some hooks
for checksum offload support, but they're turned off for now since
FreeBSD doesn't have an officially sanctioned way to support checksum
offloading (yet).

I have not added the 'device ti0' entry to GENERIC since the driver
with all the firmware compiled in is quite large, and it doesn't really
fit into the category of generic hardware.
1999-04-06 17:08:31 +00:00
Jordan K. Hubbard
3e6a56bb87 Add an option for resetting and rescanning the probed device list, perhaps
to now detect that CD you just remembered to put in the drive or that
pccard NIC that you've inserted (anybody can put pccardd in an mfsroot image
now you know.. :)

Requested by:	Annelise Anderson <andrsn@andrsn.Stanford.EDU>
1999-04-06 08:25:53 +00:00
Bill Paul
31188d61c1 Add driver support (and man page) for PCI fast ethernet cards based
on the ASIX AX88140A chip. Update /sys/conf/files, RELNOTES.TXT,
/sys/i388/i386/userconfig.c, sysinstall/devices.c, GENERIC and LINT
accordingly.

For now, the only board that I know of that uses this chip is the
Alfa Inc. GFC2204. (Its predecessor, the GFC2202, was a DEC tulip card.)
Thanks again to Ulf for obtaining the board for me. If anyone runs
across another, please feel free to update the man page and/or the
release notes. (The same applies for the other drivers.)

FreeBSD should now have support for all of the DEC tulip workalike
chipsets currently on the market (Macronix, Lite-On, Winbond, ASIX).
And unless I'm mistaken, it should also have support for all PCI fast
ethernet chipsets in general (except maybe the SMC FEAST chip, which
nobody seems to ever use, including SMC). Now if only we could convince
3Com, Intel or whoever to cough up some documentation for gigabit
ethernet hardware.

Also updated RELNOTEX.TXT to mention that the SVEC PN102TX is supported
by the Macronix driver (assuming you actually have an SVEC PN102TX with
a Macronix chip on it; I tried to order a PN102TX once and got a box
labeled 'Hawking Technology PN102TX' that had a VIA Rhine board inside
it).
1999-01-09 18:12:08 +00:00
Bill Paul
726ff6a158 An early Christmas present: add driver support for a whole bunch of
PCI fast ethernet adapters, plus man pages.

if_pn.c: Netgear FA310TX model D1, LinkSys LNE100TX, Matrox FastNIC 10/100,
         various other PNIC devices

if_mx.c: NDC Communications SOHOware SFA100 (Macronix 98713A), various
         other boards based on the Macronix 98713, 98713A, 98715, 98715A
         and 98725 chips

if_vr.c: D-Link DFE530-TX, other boards based on the VIA Rhine and
         Rhine II chips (note: the D-Link and certain other cards
         that actually use a Rhine II chip still return the PCI
         device ID of the Rhine I. I don't know why, and it doesn't
         really matter since the driver treats both chips the same
         anyway.)

if_wb.c: Trendware TE100-PCIE and various other cards based on the
         Winbond W89C840F chip (the Trendware card is identical to
         the sample boards Winbond sent me, so who knows how many
         clones there are running around)

All drivers include support for ifmedia, BPF and hardware multicast
filtering.

Also updated GENERIC, LINT, RELNOTES.TXT, userconfig and
sysinstall device list.

I also have a driver for the ASIX AX88140A in the works.
1998-12-04 18:01:24 +00:00
Jordan K. Hubbard
fbe55bf292 Add entries for DiskOnChip2000 Flash device.
Submitted by:	phk
1998-10-19 14:58:38 +00:00
Bill Paul
589e38a609 Add driver support for PCI fast ethernet adapters based on the
RealTek 8129/8139 chipset like I've been threatening. Update kernel
configs, userconfig.c, relnotes and sysinstall. No man page yet;
comming soon.

I consider this driver stable enough that I want to give it some
exposure in -current.
1998-10-18 16:24:34 +00:00
Daniel O'Callaghan
3eba1a33e8 Fix typo in message. 1998-09-30 01:46:27 +00:00
Jordan K. Hubbard
eb0ffee8a1 Remove support for floppy tape installs. I'm sorry, we're outta
space, and it's either this or the DOS installs.  I think that the
DOS installs are somehow more important. :)
1998-09-26 17:05:08 +00:00
Justin T. Gibbs
c39581f667 Device name cleanup for CAM. 1998-09-15 10:24:46 +00:00
Bill Paul
a5be897656 Add device list entries for the tl and xl PCI ethernet devices. 1998-09-13 16:45:10 +00:00
Jordan K. Hubbard
8eac04a792 MF22: Paul Traina's changes. 1998-07-18 09:42:02 +00:00
Jordan K. Hubbard
eeae79cc34 Crank the max possible disks/slices constants way down.
The probe for this sometimes makes IDE drives chatter their guts out
and takes an inordinately long time in such cases..
1998-06-29 09:28:01 +00:00
Jordan K. Hubbard
515cf34afd Merge updates from 2.2 1998-05-24 20:01:33 +00:00
Jordan K. Hubbard
9b6f1a185f Make Mitsumi and Sony CDROM devs also use the `a' device. I think
they'll have (or are having) similar problems to those described
for the matcd device in PR#6576
1998-05-11 00:47:27 +00:00
Jordan K. Hubbard
92be7163cc It was incorrect to use the `c' device for the matcd driver;
apparently, unlike the IDE or SCSI CDROM drivers, this is magically
special-cased for audio CDs.  This also might explain what happened
with scd (Sony) CDs also since I made the same change there.  A follow-up
commit will fix that. Thanks, Dave!

PR:		6576
Submitted by:	Dave Marquardt <marquard@zilker.net>
1998-05-11 00:45:06 +00:00
Jordan K. Hubbard
2be6f70cf6 MF22: create raw slice entries. 1998-03-20 23:39:57 +00:00
Jordan K. Hubbard
e5610c61ba Ack, fix typo in last commit. 1998-03-20 18:26:04 +00:00
Jordan K. Hubbard
8ff4186a6f My face is red - make the code for creating slices actually work now. 1998-03-20 18:07:02 +00:00
Jordan K. Hubbard
95742f4173 1. If device node already exists, don't gratuituously try to make it
again.

2. Don't create slice entries when running multi-user; it adds far too
   much to sysinstall's startup time.  User is expected to have correct
   slice entries after system is installed.
1998-03-16 14:33:18 +00:00
Jordan K. Hubbard
9f5f4b12f4 When doing "make unders", also remember to make entries for
any slices that exist.
1998-03-15 16:15:47 +00:00
Jordan K. Hubbard
d5cbea7e97 Form device names correctly with new unit# syntax. 1998-02-10 18:43:11 +00:00
Jordan K. Hubbard
59617ad4b8 Totally change the way that devices are made in the MFS and subsequently
probed in sysinstall.  Rather than make template devices and use up lots
of inodes, also restricting the number of devices that can be dealt with,
mknod all necessary devices as necessary using built-in information.
This removes a number of constraints on the number and type of devices
that sysinstall can see.
1998-02-10 18:31:27 +00:00
Jordan K. Hubbard
c922e45175 MF22: match entries for wfd 1998-01-22 21:14:31 +00:00
Jordan K. Hubbard
9d8d61fb4d Add entry for SMC 9432TX cards (tx driver). 1998-01-21 19:25:49 +00:00
Jordan K. Hubbard
83ac5c703b Add wfd style devices to detection list (we'll have to put them on the
boot floppy too, of course - hope I still have enough inodes! :)
1998-01-19 23:28:41 +00:00
Jordan K. Hubbard
b46285e3cf Benign changes to support Justin's CAM code. 1998-01-16 12:53:04 +00:00
Peter Wemm
b97fa2ef50 Revert $FreeBSD$ to $Id$ 1997-02-22 14:13:04 +00:00
Jordan K. Hubbard
f8ea17db2b Add device entries and documentation for Intel EtherExpress Pro/10 driver. 1997-01-17 14:18:10 +00:00
Jordan K. Hubbard
d42e16a0d6 Keep our serial ports distinct so that first device is not found for
all (closes PR#2296).
Print better FTP failure diagnostics
Do better media failure checking in install.
1997-01-15 16:21:10 +00:00
Jordan K. Hubbard
615d72264e Register SLIP/PPP devices properly again.
Make the /etc resurrection more sensible for upgrade.  No longer
quite so annoying.
1997-01-15 13:39:50 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Jordan K. Hubbard
fb25893d57 Add extra tweak for -current compilation and some debugging. 1997-01-06 11:32:44 +00:00
Jordan K. Hubbard
719de2bced Clean up device handling WRT slip and ppp devices. An incomplete transition
from one convention to another had things pretty fouled up in here.
1997-01-04 13:29:10 +00:00
Jordan K. Hubbard
e5b09b7d10 Do something I've wanted to do for quite some time - collapse all the
common layout code into some work functions and make all the layout-using
routine adopt them.  Also reorganize includes and generally clean up.
1997-01-03 06:32:39 +00:00
Jordan K. Hubbard
9f2e984973 Clean up some calls to close(). 1996-12-26 21:03:04 +00:00