- Keep last transaction label for each destination.
- If the next label is not free, just give up.
- This should reduce CPU load for TX on if_fwip under heavy load.
Approved by: re (hrs)
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
vm_phys_free_pages(). Rename vm_phys_alloc_pages_locked() to
vm_phys_alloc_pages() and vm_phys_free_pages_locked() to
vm_phys_free_pages(). Add comments regarding the need for the free page
queues lock to be held by callers to these functions. No functional
changes.
Approved by: re (hrs)
if there was more than one. In particular, this simplifies
test_tar_filenames.c, which has a tendency to be very noisy otherwise.
Approved by: re (blanket, libarchive testing)
- CMT_PF states added (w/sysctl to turn the PF version on)
- sctp_input.c had a missing incr of cookie case when the
auth was bad. This meant a free was called without an
increment to refcnt, added increment like rest of code.
- There was a case, unlikely, when the scope of the destination
changed (this is a TSNH case). In that case, it would not free
the alloc'ed asoc (in sctp_input.c).
- When listed addresses found a colliding cookie/Init, then
the collided upon tcb was not unlocked in sctp_pcb.c
- Add error checking on arguments of sctp_sendx(3) to prevent it from
referencing a NULL pointer.
- Fix an error return of sctp_sendx(3), it was returing
ENOMEM not -1.
- Get assoc id was changed to use the sanctified socket api
method for getting a assoc id (PEER_ADDR_INFO instead of
PEER_ADDR_PARAMS).
- Fix it so a peeled off socket will get a proper error return
if it trys to send to a different address then it is connected to.
- Fix so that select_a_stream can avoid an endless loop that
could hang a caller.
- time_entered (state set time) was not being set in all cases
to the time we went established.
Approved by: re(ken smith)
This adds a function to agp.c to set the aperture resource ID if it's
not the usual AGP_APBASE. Previously, agp.c had been assuming
AGP_APBASE, which resulted in incorrect agp_info, and contortions by
agp_i810.c to work around it.
This also adds functions to agp.c for default AGP_GET_APERTURE() and
AGP_SET_APERTURE(), which return the aperture resource size and disallow
aperture size changes. Moving to these for our AGP drivers will likely
result in stability improvements. This should fix 855-class aperture
size detection.
Additionally, refuse to attach agp_i810 when some RAM is above 4GB and
the GART can't reference memory that high. This should be very rare.
The correct solution would be bus_dma conversion for agp, which is
beyond the scope of this change. Other AGP drivers could likely use
this change as well.
G33/Q35/Q33 AGP support is also included, but disconnected by default
due to lack of testing.
PR: kern/109724 (855 aperture issue)
Submitted by: FUJIMOTO Kou<fujimoto@j.dendai.ac.jp>
Approved by: re (hrs)
it now verifies that the returned blocks have the correct data
at the correct file offsets, ignoring any null padding that
may exist.
Approved by: re (blanket, libarchive test suite)
behavior with truncated or damaged pax archives. This
tests most of the cases covered by the recent security advisory.
Approved by: re (blanket, libarchive test suite)
archive_read_open_memory.c that tries to test border
cases. In particular, it copies over each returned block
so that formats or decompressors that read past the end
of a returned block will break.
Approved by: re (blanket, libarchive test suite)
Add support for the CENTIPAD board (http://www.harerod.de/centipad/index.html)
(which is a very cool, very small ARM board)
Add support for KB9202B (it has different memory)
Make BOOT_FLAVOR settable
Minor cleanup nits
Approved by: re@
It is a latin9/ISO_8859-15 and features dead keys for ^/uml/`, Euro, oe/OE
support and a few additional characters like copyright/trademark.
It is probably Powerbook/iBook compatible but I don't have a machine to test
it with and the primary objective was to have a correct keyboard for within
Parallels (for IntelMacs).
Approved by: re (hrs)
by removing files from src/sys/coda, and updating include paths in the
new location, kernel configuration, and Makefiles. In one case add
$FreeBSD$.
Discussed with: anderson, Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
Repo-copy madness: simon
- change include style so build in kernel try OR standalone work.
- Limit HWCSUM - I was led to believe that it would work with RSS,
but our testing had odd issues which suggests this is false.
- A fatfinger error in the ioctl code made ifconfig up not work.
Approved by: re
- ixgbe.c, ixgbe.h, and ixgbe_osdep.h make the core OS driver.
- Others are OS independent shared code.
- This is still a Beta driver, the Intel ship is a month or so off,
so I welcome any feedback from early users.
Approved by: re
kernels exposed by the recent fixes to resource limits for 32-bit processes
on 64-bit kernels:
- Let ABIs expose their maximum stack size via a new pointer in sysentvec
and use that in preference to maxssiz during exec() rather than always
using maxssiz for all processses.
- Apply the ABI's limit fixup to the previous stack size when adjusting
RLIMIT_STACK to determine if the existing mapping for the stack needs to
be grown or shrunk (as well as how much it should be grown or shrunk).
Approved by: re (kensmith)
to the FAT is possible.
Make the FAT block size less arbitrary before it is rounded up:
- for FAT12, default to 3*512 instead of to 3 sectors. The magic 3 is
the default number of 512-byte FAT sectors on a floppy drive. That
many sectors is too many if the sector size is larger.
- for !FAT12, default to PAGE_SIZE instead of to 4096. Remove
MSDOSFS_DFLTBSIZE since it only obfuscated this 4096.
For reading the BPB, use a block size of 8192 instead of 2048 so that
sector sizes up to 8192 can work. We should try several sizes, or just
try the maximum supported size (MAXBSIZE = 64K). I use 8192 because
that is enough for DVD-RW's (even 2048 is enough) and 8192 has been
tested a lot in use by ffs.
This completes fixing msdosfs for some large sector sizes (up to 8K
for read and 64K for write). Microsoft documents support for sector
sizes up to 4K in mdosfs. ffs is currently limited to 8K for both
read and write.
Approved by: re (kensmith)
Approved by: nyan (several years ago)
Rev 1.9 introduced another path where machclk_freq would be initialized
before the rest of setup was done (i.e. initializing the callout). Make
the one-time initialization a separate function and make init_machclk()
able to be called multiple times, any time. We depend on tsc_freq first
being updated from the highest priority eventhandler, thus we run last
and call init_machclk() to set machclk_freq. Also, don't initialize
static variables to 0.
Tested by: Eygene Ryabinkin
Approved by: re
part of fixing msdosfs for large sector sizes. One of the fixed bugs
was fatal for large sector sizes.
1. The fsinfo block has size 512, but it was misunderstood and declared
as having size 1024, with nothing in the second 512 bytes except a
signature at the end. The second 512 bytes actually normally (if
the file system was created by Windows) consist of a second boot
sector which is normally (in WinXP) empty except for a signature --
the normal layout is one boot sector, one fsinfo sector, another
boot sector, then these 3 sectors duplicated. However, other
layouts are valid. newfs_msdos produces a valid layout with one
boot sector, one fsinfo sector, then these 2 sectors duplicated.
The signature check for the extra part of the fsinfo was thus
normally checking the signature in either the second boot sector
or the first boot sector in the copy, and thus accidentally
succeeding. The extra signature check would just fail for weirder
layouts with 512-byte sectors, and for normal layouts with any other
sector size.
Remove the extra bytes and the extra signature check.
2. Old versions did i/o to the fsinfo block using size 1024, with the
second half only used for the extra signature check on read. This
was harmless for sector size 512, and worked accidentally for sector
size 1024. The i/o just failed for larger sector sizes.
The version being fixed did i/o to the fsinfo block using size
fsi_size(pmp) = (1024 << ((pmp)->pm_BlkPerSec >> 2)). This
expression makes no sense. It happens to work for sector small
sector sizes, but for sector size 32K it gives the preposterous
value of 64M and thus causes panics. A sector size of 32768 is
necessary for at least some DVD-RW's (where the minimum write size
is 32768 although the minimum read size is 2048).
Now that the size of the fsinfo block is 512, it always fits in
one sector so there is no need for a macro to express it. Just
use the sector size where the old code uses 1024.
Approved by: re (kensmith)
Approved by: nyan (several years ago for a different version of (2))
tar archives, including a potentially exploitable buffer overflow.
Approved by: re (kensmith, security blanket)
Reviewed by: kientzle
Security: FreeBSD-SA-07:05.libarchive
than indirecting through ifaddr_byindex, which makes things easier with
respect to virtualized network stacks.
Submitted by: Marko Zec <zec at icir dot org>
Reviewed by: Leonid Grossman <Leonid dot Grossman at neterion dot com>
Approved by: re (kensmith)
non-sleepable lock held. drm_pci_alloc() calls them, thus drm mutex shall
not be held during the call.
Move the drm_pci_alloc() to the start of the i915_initialize() and drop the
the drm mutex around it.
Reported by: Ganbold <ganbold micom mng net>
Reviewed by: anholt
Approved by: re (hrs)
MFC after: 1 week
- use net80211 for scanning and pass the results back to the scan cache
- use ieee80211_init_channels to fill our channel list
- fix up state transitions
- depreciate the old wicontrol ioctls
- add some debugging lines (#define NDIS_DEBUG)
Reviewed by: sam
Approved by: re (kensmith)
being output in verbose mode when doing recursive[1].
- Use better representation of S:
PR: bin/114470
Submitted by: Ighighi <ighighi gmail com> [1]
Approved by: re (hrs)
