r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Filesystems which want to use it in limited capacity can employ the
VOP_UNLOCK_FLAGS macro.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D21427
srandom(9) is meaningless on SMP systems or any system with, say,
interrupts. One could never rely on random(9) to produce a reproducible
sequence of outputs on the basis of a specific srandom() seed because the
global state was shared by all kernel contexts. As such, removing it is
literally indistinguishable to random(9) consumers (as compared with
retaining it).
Mark random(9) as deprecated and slated for quick removal. This is not to
say we intend to remove all fast, non-cryptographic PRNG(s) in the kernel.
It/they just won't be random(9), as it exists today, in either name or
implementation.
Before random(9) is removed, a replacement will be provided and in-tree
consumers will be converted.
Note that despite the name, the random(9) interface does not bear any
resemblance to random(3). Instead, it is the same crummy 1988 Park-Miller
LCG used in libc rand(3).
amd64 miniport drivers are allowed to use FPU which triggers "Unregistered use
of FPU in kernel" panic.
Wrap all variants of MSCALL with fpu_kern_enter/fpu_kern_leave. To reduce
amount of allocations/deallocations done via
fpu_kern_alloc_ctx/fpu_kern_free_ctx maintain cache of fpu_kern_ctx elements.
Based on the patch by Paul B Mahol
PR: 165622
Submitted by: Vlad Movchan <vladislav.movchan@gmail.com>
MFC after: 1 month
Casting from rman_res_t to a pointer results in "cast to pointer from
integer of different size" warnings with base gcc on i386, so use an
intermediate cast to uintptr_t to suppress it. In this case, the I/O
port range is effectively limited to the range of 0..65535.
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15746
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
All of these arguments are stored in m_ext, so there is no reason
to pass them in the argument list. Not all functions need the second
argument, some don't even need the first one. The second argument
lives in next cache line, so not dereferencing it is a performance
gain. This was discovered in sendfile(2), which will be covered by
next commits.
The second goal of this commit is to bring even more flexibility
to m_ext mbufs, allowing to create more fields in m_ext, opaque to
the generic mbuf code, and potentially set and dereferenced by
subsystems.
Reviewed by: gallatin, kbowling
Differential Revision: https://reviews.freebsd.org/D12615
- Revert the change for seed(0) in r300384. I misunderstood the standard
and while our random() implementation in libkern may be improved, it
handles the seed(0) case fine.
Pointed out by: bde, ache
- Revert r300377: The implementation claims to return a value
within the range. [1]
- Adjust the value for the case of a zero seed, whihc according
to standards should be equivalent to a seed of value 1.
Pointed out by: cem
This is a long standing problem: our random() function returns an
unsigned integer but the rand provided by ndis(4) returns an int.
Scale it down.
MFC after: 2 weeks
In ndis(4) we expose a rand() function that was constantly reseeding
with a time depending function every time it was called. This
essentially broke the reasoning behind seeding, and rendered srand()
a no-op.
Keep it simple, just use random() and srandom() as it's meant to work.
It would have been tempting to just go for arc4random() but we
want to mimic Microsoft, and we don't need crypto-grade randomness
here.
PR: 209616
MFC after: 2 weeks
The "len" parameter is uint32_t, indexing it with an int may
end up in a signed integer overflow.
strlen(3) returns an integer of size_t so the corresponding index should
have that size.
MFC after: 1 week
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
Previously several places were doing it on its own, partially
incorrectly (e.g. without the filedesc locked) or even actively harmful
by populating jdir or assigning rootvnode without vrefing it.
Reviewed by: kib
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
external mbuf buffer management capabilities in the future.
For now only EXT_FREE_OK is defined with current legacy behavior.
Sponsored by: The FreeBSD Foundation
transparent layering and better fragmentation.
- Normalize functions that allocate memory to use kmem_*
- Those that allocate address space are named kva_*
- Those that operate on maps are named kmap_*
- Implement recursive allocation handling for kmem_arena in vmem.
Reviewed by: alc
Tested by: pho
Sponsored by: EMC / Isilon Storage Division
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
After getting the current irql, if the kthread gets preempted and
subsequently runs on a different CPU, the saved irql could be wrong.
Also, correct the panic string.
PR: kern/165630
Submitted by: Vladislav Movchan <vladislav.movchan at gmail.com>
Add the sysctl debug.iosize_max_clamp, enabled by default. Setting the
sysctl to zero allows to perform the SSIZE_MAX-sized i/o requests from
the usermode.
Discussed with: bde, das (previous versions)
MFC after: 1 month
definition from K&R to ANSI, to avoid a clang warning about the uint8_t
parameter being promoted to int, which is not compatible with the type
declared in the earlier prototype.
MFC after: 1 week
resource - the layout of cprd_port is identical but using cprd_mem
makes the code easier to understand.
PR: kern/118493
Submitted by: Weongyo Jeong <weongyo.jeong at gmail.com>
MFC after: 3 days
the original amd64 and i386 headers with stubs.
Rename (AMD64|I386)_BUS_SPACE_* to X86_BUS_SPACE_* everywhere.
Reviewed by: imp (previous version), jhb
Approved by: kib (mentor)
With that change the Atheros 9xxx driver is actually usable and does not
panic anymore.
Submitted by: Paul B Mahol <onemda at gmail.com>
MFC after: 2 weeks
driver for example requests the NetCfgInstanceId but doesn't check the
returned status code and will happily access random memory instead.
Submitted by: Paul B Mahol <onemda at gmail.com>
MFC after: 2 weeks
