Commit Graph

428 Commits

Author SHA1 Message Date
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Warner Losh
e181db22a4 Add device ID for Xircom modem. Also add work around from gwk@sgi.com
to put the device into 8 bit mode a second time.  This appears to have
no ill effects on other devices, and appears to be necessary for the
xircom modem.

Submitted by: gwk@sgi.com, many others that found his patch in the archives.
2002-03-16 04:26:46 +00:00
Yoshihiro Takahashi
959168ab57 Add pc98 support. 2002-03-08 12:41:32 +00:00
Takanori Watanabe
54f737c3a6 Add two IrDA controller ID: IBM TP240(Probably NSC compatible), and SMC IrCC
controller.
2002-03-03 13:26:59 +00:00
Warner Losh
476f923056 Until I can figure out how to live without the volatile qualifier on
comdefaultrate, comment out the support for machdep.conspeed for now.
2002-02-26 03:46:14 +00:00
Warner Losh
96fc5a062e Add an experimental tunable: machdep.conspeed.
# I'm not sure where to document this.
2002-02-26 03:13:30 +00:00
John Hay
9c564b6c92 Add the puc (PCI "Universal" Communications) driver. The idea and some of
the structure definitions come from NetBSD to make it easier to share card
definitions. The driver only acts as a shim between the pci bus and the
sio driver. Later pci parallel ports could also be supported through this
driver. Support for most single and multiport pci serial cards should be
as simple as adding its definition to pucdata.c

Tested with the following pci cards:
Moxa Industio CP-114, 4 port RS-232,RS-422/485
Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports
Netmos NM9835 PCI-2S-550, 2 port RS-232
2002-02-16 15:12:14 +00:00
Yoshihiro Takahashi
9fdd7481ef Add pc98 support. 2002-01-31 08:24:36 +00:00
Yoshihiro Takahashi
c34cc16d46 Remove obsolete COMBRD* definitions. 2002-01-31 08:23:30 +00:00
John Hay
57019e6041 Add support for different serial clock frequencies and not just the
standard one of 1.8432MHz. This will be used by the puc (PCI
"universal" communication card) device driver.

Reviewed by:	bde
2002-01-30 17:22:04 +00:00
Bruce A. Mah
7f04152a10 Cosmetic fix: Not every machine that uses the sio driver has a BIOS.
Pointed out by:	imp
2002-01-17 20:05:47 +00:00
Warner Losh
ba24c8d971 While I'm not sure that I like the wording of the BIOS message in the
previous commit, it should always print due to lack of {} around the
second line in the if statement.  The message should likely say
something more like "There's no hardware responding at this IRQ.
Device not present (or disbaled)," but that is too long.  We generally
don't give elementary advise in device driver messages anyway.  Be
that as it may, the problem with it printing all the time should be
corrected.
2002-01-17 16:16:51 +00:00
Bruce A. Mah
ea9e3e8f9b Make sio device probe messages less misleading, for the case that
a port is either disabled or not responding.

PR:		33963
Submitted by:	Kevin Oberman <oberman@es.net>
MFC after:	2 weeks
2002-01-17 06:21:45 +00:00
John Baldwin
c86b6ff551 Change the preemption code for software interrupt thread schedules and
mutex releases to not require flags for the cases when preemption is
not allowed:

The purpose of the MTX_NOSWITCH and SWI_NOSWITCH flags is to prevent
switching to a higher priority thread on mutex releease and swi schedule,
respectively when that switch is not safe.  Now that the critical section
API maintains a per-thread nesting count, the kernel can easily check
whether or not it should switch without relying on flags from the
programmer.  This fixes a few bugs in that all current callers of
swi_sched() used SWI_NOSWITCH, when in fact, only the ones called from
fast interrupt handlers and the swi_sched of softclock needed this flag.
Note that to ensure that swi_sched()'s in clock and fast interrupt
handlers do not switch, these handlers have to be explicitly wrapped
in critical_enter/exit pairs.  Presently, just wrapping the handlers is
sufficient, but in the future with the fully preemptive kernel, the
interrupt must be EOI'd before critical_exit() is called.  (critical_exit()
can switch due to a deferred preemption in a fully preemptive kernel.)

I've tested the changes to the interrupt code on i386 and alpha.  I have
not tested ia64, but the interrupt code is almost identical to the alpha
code, so I expect it will work fine.  PowerPC and ARM do not yet have
interrupt code in the tree so they shouldn't be broken.  Sparc64 is
broken, but that's been ok'd by jake and tmm who will be fixing the
interrupt code for sparc64 shortly.

Reviewed by:	peter
Tested on:	i386, alpha
2002-01-05 08:47:13 +00:00
Sheldon Hearn
a0de19b9a0 Add PNP Id for Create Labs Phoneblaster.
PR:		kern/32891
Submitted by:	Louis Mamakos <louie@TransSys.COM>
2001-12-30 13:12:50 +00:00
Bruce Evans
fb717773e7 Fixed locking bugs in rev.1.346:
(1) Don't attempt aquire the non-recursive lock sio_lock recursively.
    Doing so caused unbounded recursion in some setups.  E.g., if DDB,
    BREAK_TO_DEBUGGER and WITNESS are configured; if the debugger is
    entered using a break, then WITNESS will actually detect the invalid
    recursion and will add to it attempting to print a message about it.

(2) Don't use sio_lock before it has been initialized.  The old check
    (sio_inited != 0) didn't work when sio_inited was boolean because
    sio_inited was set too early, and became just wrong when sio_inited
    was changed to a tri-state variable in rev.1.348.

Reported and fixed in another way by:	fenner (1)
2001-12-28 18:08:10 +00:00
Seigo Tanimura
5c18b9160d Fix typo first, then controvert. 2001-12-24 01:24:38 +00:00
Matthew Dillon
6aebdaaf0a Back out an inappropriate backout. If Anyone wants to set the FIFO
level that high they should first fix the problems with the system that
cause silo overflows.  It is far more important for the serial device
to work.
2001-12-23 02:48:25 +00:00
Bruce Evans
f36422c140 Backed out previous unapproved commit. 2001-12-23 02:38:04 +00:00
Matthew Dillon
61056a0454 This problem has been in the serial driver for years, and I occassionally
see people trip over it.  Do not set the FIFO trigger to just before it
would otherwise overflow.  Give it a little more slop so characters aren't
lost if the interrupt is delayed by other system activities.

MFC maybe: 7 days
2001-12-23 00:48:37 +00:00
Yoshihiro Takahashi
de48920662 Split the sio driver for pc98 into bus front end and back end.
(merged from the files in sys/dev/sio)
2001-11-26 12:29:53 +00:00
Warner Losh
1c988e75f4 bde suggests that sio really wants to manage its own softc. This
allows us to move the sio softc data structure back into sio.c and
reduce the complexity of the non sio.c sio files.

Submitted by: bde

# I didn't fix the locking issues that bruce also submitted.
2001-11-26 07:39:51 +00:00
Warner Losh
f703f3eaee First part of patches to make sio grok 16-bit serial cards under
NEWCARD.  Other patches may be reqiured to sio to prevent a hang on
eject.  Also add commented out entries for sio_pccard.c in files.pc98
to match other architectures.

Submitted by: yamamoto shigeru-san
2001-11-26 00:39:33 +00:00
Ian Dowse
56f7305f58 Add the PnP ID for a Rockwell 33.6k modem.
PR:		kern/23414
Submitted by:	Ryuichiro Imura <imura@af.airnet.ne.jp>
MFC after:	1 week
2001-11-18 16:39:09 +00:00
Jonathan Lemon
553b79aa63 cn_tab no longer exists, use cnadd() to add a console device. Note that
this may result in duplicate console output in some cases.
2001-10-24 18:30:05 +00:00
Jonathan Lemon
034cc6fe5a Add a siocnterm function for the CONS_DRIVER function vector. 2001-10-23 20:16:56 +00:00
Warner Losh
2ce87d3448 Break out the bus front ends into their own files. Rewrite
sio_pccard_detach to use new siodetach.  Add an extra arg to sioprobe
to tell driver to probe/not probe the device for IRQs.

This incorporates most of Bruce's review material.  I'm at a good
checkpoint, but there will be more to come based on bde's further
reviews.

Reviewed by: bde
2001-10-23 15:17:33 +00:00
Warner Losh
d75c1b4a90 First commit after a repo copy of isa/sio* -> dev/sio:
Move sio from isa/sio.c to dev/sio/sio.c.  The next step is to break
out the front end attachments, improve support for these parts on
different busses, and maybe, if we're lucky, merging in pc98 support.
It will also be MI and live in conf/files rather than files.*.

Approved by: bde
Tested with: i386, pc98
2001-10-22 02:48:38 +00:00
John Baldwin
76e296aa31 - Make the sio_inited handling more properly MP safe.
- If we are booting with a serial console, then pass the MTX_QUIET flag to
  mtx_init of the sio lock as otherwise KTR_VERBOSE simply doesn't work.
2001-10-20 03:32:33 +00:00
Jonathan Lemon
750c427849 Add support for 28800 baud to sio.
PR: 30906
Submitted by: "Daniel O'Connor" <darius@chowder.dons.net.au>
2001-09-29 04:49:11 +00:00
Jonathan Lemon
3a163803b7 Gate low level console output on mtx_lock_spin(&sio_lock), if the
sio_lock has been initialized.  This prevents the low level console
output (kernel printf) from clobbering the sio settings if the system
happens to be in the middle of comstart().
2001-09-27 17:00:25 +00:00
Doug Rabson
8beffae7be Tweak so I can use a serial console on ia64. 2001-09-22 19:44:37 +00:00
Murray Stokely
0aef0b4d6b Recognize two cheap PCI 16550 devices :
CyberSerial (1-port) 16550
  Oxford Semiconductor Dual Port 16550

Sort the list of PCI devices while I'm here.
2001-09-16 11:14:56 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Dima Dorfman
610dcffd26 Add a missing newline to an error message.
PR:		30436
Submitted by:	Joerg Lehners <Lehners@Informatik.Uni-Oldenburg.DE>
2001-09-09 14:48:52 +00:00
Murray Stokely
b64e68c520 Add ID for the Best Data Smart One 56SPS Voice modem.
PR:		kern/24851
Submitted by:	Daniel Rudy <dcrudy@aol.com>
2001-08-31 21:51:00 +00:00
Murray Stokely
6e66dd6b62 Add OMRON ME5614ISA PnP modem.
PR:		kern/22801
Submitted by:	Ryuzo Okada <R.Okada@mm.neweb.ne.jp>
2001-08-31 20:37:02 +00:00
Murray Stokely
4fd606bfba Add PCI device IDs for Kuotech dual port serial cards.
Also give example of the flags needed to use these cards.

PR:		kern/21242
Submitted by:	Shigeki Moride <moride@portside.net>
2001-08-31 20:16:00 +00:00
Mike Smith
5f063c7b09 Add ACPI attachments. 2001-08-30 09:17:03 +00:00
Warner Losh
1865c617e4 Fix the so-called "half-baked-probe" code that I wrote a long time ago
to properly clear the interrupt register on the no error case.  Also,
set the mcr register to zero when we find we can't support the chip.

This fixes the hang on sio driver attach problem in the new pci pccard
code that some people have reported.  At least on my machine.  I'd
like to get this into 4.4.

Submitted by: bde
PR: kern/29742

MFC after: 1 day
2001-08-16 17:30:55 +00:00
Ian Dowse
11fbe665c0 The serial console break-to-debugger support only functioned while
the console device was open. At other times, the interrupts that
are used to detect the break signal or ~^B sequence were disabled,
so these events would not be noticed until the next open (e.g. the
next kernel printf). This was mainly a problem while there was no
getty running on the console, such as during bootup or shutdown.

For serial consoles with break-to-debugger support, we now enable
the generation of interrupts at attach time, and we leave them
enabled while the device is closed.

Reviewed by:	bde (I've since made chages as per his suggestions)
2001-06-20 16:47:23 +00:00
Warner Losh
53e4eaaeba Close the line displine on detach. Lots of folks have submittd this, and
I think bde even reviewed it once.

Also, change the name of ActionTEC pat to more generic Lucent Kermit
chip.  Add stub for Xircom card.  Add cardbus attachment too.
2001-06-05 05:58:57 +00:00
Joerg Wunsch
b794010414 Move out the files from src/sys/isa/ic/ to src/sys/dev/ic/, so they
can be made userland-visible as <dev/ic/...>.  Also, those files are
not supposed to contain any bus-specific details at all, so placing
them under .../isa/ has been a misnomer from the beginning.

The files in src/sys/dev/ic/ have been repo-copied from their old
location (this commit is a forced null commit there to record this
message).
2001-06-04 21:04:14 +00:00
MIHIRA Sanpei Yoshiro
882f2b2b40 add Dualmode Zoom/FaxModem 56K (internal) Model 2919
PR:		kern/27476
Submitted by:	Eric Beyer <lnxfrk@earthlink.net>
2001-05-26 11:17:57 +00:00
MIHIRA Sanpei Yoshiro
1a92411c80 Add SmartLink 5634PCV SurfRider
PR:		kern/26952
Submitted by:	Simon Dick <simond@irrelevant.org>
2001-05-20 03:12:55 +00:00
John Baldwin
8bd57f8fc2 Remove unneeded includes of sys/ipl.h and machine/ipl.h. 2001-05-15 23:22:29 +00:00
Mark Murray
fb919e4d5a Undo part of the tangle of having sys/lock.h and sys/mutex.h included in
other "system" header files.

Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.

Sort sys/*.h includes where possible in affected files.

OK'ed by:	bde (with reservations)
2001-05-01 08:13:21 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
MIHIRA Sanpei Yoshiro
6573bc0b37 Add GVC1601 - Rockwell V.34 Plug & Play Modem
PR:		kern/25204
Submitted by:	Victor Ivanov <v0rbiz@icon.bg>
2001-03-07 14:27:56 +00:00
MIHIRA Sanpei Yoshiro
ab410acc0a Add IOD0081 - I-O DATA DEVICE,INC. IFML-560
PR:		kern/25173
Submitted by:	Yohsuke Fujikawa <yohsuke@mx2.nisiq.net>
2001-03-07 14:19:55 +00:00
Jonathan Lemon
608a3ce62a Extend kqueue down to the device layer.
Backwards compatible approach suggested by: peter
2001-02-15 16:34:11 +00:00
Mark Murray
d888fc4e73 RIP <machine/lock.h>.
Some things needed bits of <i386/include/lock.h> - cy.c now has its
own (only) copy of the COM_(UN)LOCK() macros, and IMASK_(UN)LOCK()
has been moved to <i386/include/apic.h> (AKA <machine/apic.h>).
Reviewed by:	jhb
2001-02-11 10:44:09 +00:00
John Baldwin
062d8ff5a0 - Catch up to the new swi API changes:
- Use swi_* function names.
  - Use void * to hold cookies to handlers instead of struct intrhand *.
- In sio.c, use 'driver_name' instead of "sio" as the name of the driver
  lock to minimize diffs with cy(4).
2001-02-09 17:46:35 +00:00
Bosko Milekic
9ed346bab0 Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:

mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)

similarily, for releasing a lock, we now have:

mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.

The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.

Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:

MTX_QUIET and MTX_NOSWITCH

The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:

mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.

Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.

Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.

Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.

Finally, caught up to the interface changes in all sys code.

Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
Peter Wemm
8ab109d131 Remove count for NSIO. The only places it was used it were incorrect.
(alpha-gdbstub.c got sync'ed up a bit with the i386 version)
2001-01-31 10:54:45 +00:00
Seigo Tanimura
307afaf3c6 Add OZO8008 - Zoom (33.6k Modem).
PR:		kern/23336
Submitted by:	Paulo Menezes <root@samurai.dee.uc.pt>
2000-12-26 06:52:57 +00:00
John Baldwin
6d0006c203 Convert the sio driver to use a spin mutex instead of a s_lock. This is
going to hurt sio(4) performance for the time being.  As we get closer to
release and have more of the kernel unlocked we can come back to doing
arcane optimizations to workaround the limitations of the sio hardware.
2000-12-18 23:56:16 +00:00
John Baldwin
8088699f79 - Overhaul the software interrupt code to use interrupt threads for each
type of software interrupt.  Roughly, what used to be a bit in spending
  now maps to a swi thread.  Each thread can have multiple handlers, just
  like a hardware interrupt thread.
- Instead of using a bitmask of pending interrupts, we schedule the specific
  software interrupt thread to run, so spending, NSWI, and the shandlers
  array are no longer needed.  We can now have an arbitrary number of
  software interrupt threads.  When you register a software interrupt
  thread via sinthand_add(), you get back a struct intrhand that you pass
  to sched_swi() when you wish to schedule your swi thread to run.
- Convert the name of 'struct intrec' to 'struct intrhand' as it is a bit
  more intuitive.  Also, prefix all the members of struct intrhand with
  'ih_'.
- Make swi_net() a MI function since there is now no point in it being
  MD.

Submitted by:	cp
2000-10-25 05:19:40 +00:00
Seigo Tanimura
300b36ab36 Add MAE0021 - Jetstream Int V.90 56k Voice Series 2.
PR:		i386/19920
Submitted by:	Peter Ortner <port@iname.com>
2000-10-10 10:06:26 +00:00
Bruce Evans
185fee17ad Use schedsofttty() again so that siopoll() gets scheduled as designed
(SMPng casualty in rev.1.308 with wrong fix in rev.1.310).
2000-10-08 14:13:31 +00:00
John Baldwin
1931cf940a - Heavyweight interrupt threads on the alpha for device I/O interrupts.
- Make softinterrupts (SWI's) almost completely MI, and divorce them
  completely from the x86 hardware interrupt code.
  - The ihandlers array is now gone.  Instead, there is a MI shandlers array
    that just contains SWI handlers.
  - Most of the former machine/ipl.h files have moved to a new sys/ipl.h.
- Stub out all the spl*() functions on all architectures.

Submitted by:	dfr
2000-10-05 23:09:57 +00:00
John Baldwin
e268a9aae5 - Wrap functions and variables that aren't used in the alpha console probe
with #ifndef __alpha__/#endif
- Add function prototypes for functions used during the alpha console
  probe and gdb port setup inside of #ifdef __alpha__/#endif.
2000-09-22 08:42:30 +00:00
John Baldwin
9a94c9c5c3 - Remove the inthand2_t type and use the equivalent driver_intr_t type from
newbus for referencing device interrupt handlers.
- Move the 'struct intrec' type which describes interrupt sources into
  sys/interrupt.h instead of making it just be a x86 structure.
- Don't create 'ithd' and 'intrec' typedefs, instead, just use 'struct ithd'
  and 'struct intrec'
- Move the code to translate new-bus interrupt flags into an interrupt thread
  priority out of the x86 nexus code and into a MI ithread_priority()
  function in sys/kern/kern_intr.c.
- Remove now-uneeded x86-specific headers from sys/dev/ata/ata-all.c and
  sys/pci/pci_compat.c.
2000-09-13 18:33:25 +00:00
John Baldwin
a0e1678488 Add a nasty hack to get remote kernel gdb working from ddb. ddb would
complain before that a suitable gdb port had not been setup because gdbdev
was NULL.  This abuses the fact that the gdb port is hard-coded to the
address normally assigned to sio1 and thus hard-codes in sio1 as the gdb
port.  Yuck.
2000-09-11 04:33:36 +00:00
John Baldwin
9c25701692 Back out my previous commit as well as some SMPng changes to revert the
siosetwater() function to its previous behavior of always disabling
interrupts and obtaining the com_lock before returning.

Requested by:	bde (in principle)
2000-09-08 08:50:25 +00:00
Greg Lehey
e45e88e8aa siointr1: Schedule soft interrupt when needed. This fixes the "no
interrupt" problem people had seen with SMPng.

Approved by:       jasone
Tested by:         bp
2000-09-08 06:58:58 +00:00
John Baldwin
60ee19d500 Fix a problem where we would recursively try to get the com lock within
comparam when calling siosetwater().

Noticed by:	bp
2000-09-08 00:35:46 +00:00
Jason Evans
0384fff8c5 Major update to the way synchronization is done in the kernel. Highlights
include:

* Mutual exclusion is used instead of spl*().  See mutex(9).  (Note: The
  alpha port is still in transition and currently uses both.)

* Per-CPU idle processes.

* Interrupts are run in their own separate kernel threads and can be
  preempted (i386 only).

Partially contributed by:	BSDi (BSD/OS)
Submissions by (at least):	cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Sheldon Hearn
bade5944c9 Add ZTIA001 - Zoom Internal V90 Faxmodem.
PR:		21028
Submitted by:	Glenn Johnson <glennpj@charter.net>
2000-09-05 09:42:47 +00:00
Sheldon Hearn
1eb283fdc2 Add Boca K56Flex PnP modem.
PR:		21000
Submitted by:	Andrew Sparrow <spadger@best.com>
2000-09-04 13:50:37 +00:00
Poul-Henning Kamp
62ddc84e08 Call destroy_dev() when sio devices go away. 2000-08-27 14:46:13 +00:00
Peter Wemm
d7db4e569d Add another USR modem.
PR: 20621
Submitted by: Masanori Taira <mtaira@logicaleffect.com>
2000-08-15 21:03:28 +00:00
Poul-Henning Kamp
77978ab8bc Previous commit changing SYSCTL_HANDLER_ARGS violated KNF.
Pointed out by:	bde
2000-07-04 11:25:35 +00:00
Poul-Henning Kamp
82d9ae4e32 Style police catches up with rev 1.26 of src/sys/sys/sysctl.h:
Sanitize SYSCTL_HANDLER_ARGS so that simplistic tools can grog our
sources:

        -sysctl_vm_zone SYSCTL_HANDLER_ARGS
        +sysctl_vm_zone (SYSCTL_HANDLER_ARGS)
2000-07-03 09:35:31 +00:00
Paul Saab
26b6ea69c3 Add option ALT_BREAK_TO_DEBUGGER.
Implement the Solaris way to break into DDB over a serial console
instead of sending a break.  Sending the character sequence
CR ~ ^b will break the kernel into DDB (if DDB is enabled).

Reviewed by:	peter
2000-06-14 06:41:33 +00:00
Seigo Tanimura
26605df75f Add SUP1670 - Supra 336i V+ Intl. Since we update the PnP IDs
more frequently than the core part of the sio driver, it might
be good to move the PnP IDs to sio_isapnp.h or something like
that.

PR:		i386/18828
Submitted by:	J.P. King <jpk28@cam.ac.uk>
2000-05-26 11:41:08 +00:00
Seigo Tanimura
07a1e11832 Add RSS0262 - 5614Jx3[G] V90+K56Flex Modem.
PR:		kern/18168
Submitted by:	Tony Voet <voet@engineer.com>
2000-05-19 10:02:15 +00:00
Seigo Tanimura
026957712e Add ACH2012 - 5634BTS 56K Video Ready Modem.
PR:		kern/17351
Submitted by:	Eric D. Futch <efutch@nyct.net>
2000-05-19 03:41:22 +00:00
Seigo Tanimura
ca39cee745 Add a couple of new PnP IDs.
o OZO800f - Zoom 2812 (56k Modem)
PR:		kern/18603
Submitted by:	Matt Loschert <loschert@servint.com>

o DAV0336 - DAVICOM 336PNP MODEM
PR:		kern/18608
Submitted by:	Martijn Plak <martijn@be3.com>
2000-05-18 02:06:24 +00:00
Yoshihiro Takahashi
bb7d754339 Use bus_space stuff except where it needs high performance.
Reviewed by:	bde
2000-05-12 12:37:28 +00:00
Seigo Tanimura
af2dfb5b69 Add the logical ID of FUJITSU Modem 33600 PNP/I2.
PR:		kern/18257
Submitted by:	Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp>
2000-05-02 05:54:11 +00:00
Warner Losh
b6f6dacdd3 Add support for pci modems. ONLY CONTROLLER BASED MODEMS. This
doesn't support winmodems, softmodems, hcf or any other modem that
relies on the host to do any sort of soft control for any aspect of
the modem's function.  There are two modems known to work:
	3COM FaxModem PCI.
	ActionTec 56k VoiceMessaging PCI Modem
and the following modem might work
	Multitech PCI FaxModem	(not sure about this)
and the serial pci cards might work too.  I have neither these
hardware items so I can't add support for them.
2000-04-01 06:14:21 +00:00
Peter Wemm
39f1e703ec Recognize USR3050 "U.S. Robotics 56K FAX INT" fax modem.
PR:		17702
Submitted by:	Scot W. Hetzel <hetzels@westbend.net>
2000-03-31 07:09:08 +00:00
Poul-Henning Kamp
91266b96c4 Isolate the Timecounter internals in their own two files.
Make the public interface more systematically named.

Remove the alternate method, it doesn't do any good, only ruins performance.

Add counters to profile the usage of the 8 access functions.

Apply the beer-ware to my code.

The weird +/- counts are caused by two repocopies behind the scenes:
	kern/kern_clock.c -> kern/kern_tc.c
	sys/time.h -> sys/timetc.h
(thanks peter!)
2000-03-20 14:09:06 +00:00
Warner Losh
633f93bee5 Fix crashes on card eject for pccard modems. We check for NULL when
we get the com address.  If so, we go ahead and return.  Bruce thinks
there's a bug in the pccard layer that it terminates devices with
extreme prejustice rather than letting them deside for themselves when
to terminate (and he's likely right).  This fix doesn't change that,
but instead works around it by checking for NULL pointers at more
places than before.

The detach routine still calls functions at interrupt level that
aren't reentrant.  In theory this could cause a problem, but none
showed up in practice.  Future versions should correct this problem,
likely by making the detach process a thread/process at the pccard
level.  NEWCARD will do this, and the current pccard layer should
likely be modified to that as well, should it live long enough.

A few style nits of the same form that were in my original patch sent
off to bde were also fixed as part of this process.  Mostly use of
!ptr and return ENOPARENS.

This should prevent a crash on suspend with an active ppp link as
well, but that wasn't tested.

Reviewed by:	bde
Approved by:	jkh
2000-03-11 20:22:09 +00:00
Peter Wemm
d365f16644 Recognize another modem, "PMC2430 - Pace 56 Voice Internal Modem"
Submitted by:	Mark Ovens <mark@ukug.uk.freebsd.org>
2000-03-05 14:44:05 +00:00
Peter Wemm
fee576b2e5 Fix two more problems with freeing the softc data manually. subr_bus.c
is responsible for this and this will lead to malloc 'freeing already
free' type panics.  One was in the probe code, the other was in the
pccard eject? code.

Not explicitly approved by: jkh (but the first is fallout from subr_bus.c
rev 1.54 which was an approved commit, the second is the same problem)
2000-03-02 03:45:41 +00:00
Bruce Evans
34ae9210dd Fixed regressions in rev.1.274:
1) Non-AST4 multiport cards were broken by bypassing the code that changes
   `idev' to the multiport master device.
2) AST4 multiport cards apparently were broken by inverting the test for
   the master device having an irq.
3) Error handling for nonexistent master devices was broken by removing a
   check for a null pointer.
4) `int' error codes returned by bus_get_resource() were assigned directly
   to the boolean variable com->no_irq.  Probably harmless, since the
   boolean is implemented as a u_char.

Submitted by:	part 1) by Chris Radek <cradek@in221.inetnebr.com>
		part 2) by yokota
Approved by:	jkh
2000-02-15 17:29:09 +00:00
Bruce Evans
689315d4f7 "Completed" the previous fix. Return ENOMEM on memory allocation failure
in sioattach(), not ENXIO.  Free resources before returning early in
sioprobe() and sioattach().
2000-01-29 03:02:55 +00:00
Nick Hibma
9c918de3de Return ENXIO on error, not 0. Seems to have been skipped when converting
to newbus.

Reviewed by:	bde
2000-01-23 15:11:15 +00:00
Peter Wemm
5995e84e19 Add another four device ID's for isa pnp modems. The USR's seem to use
the same vendor and logical ID.  The rest I am not sure whether they
are vendor or logical, but it won't hurt if I've put a vendor ID here
as merely will not match.  These came from the old sio-pnp code, hence
the uncertainty about which ID it is.
2000-01-18 09:30:58 +00:00
Andrew Gallatin
91dab55369 Make this compile on alpha 2000-01-13 02:09:44 +00:00
Kazutaka YOKOTA
35e61cbd71 Add a new mechanism, cndbctl(), to tell the console driver that
ddb is entered.  Don't refer to `in_Debugger' to see if we
are in the debugger.  (The variable used to be static in Debugger()
and wasn't updated if ddb is entered via traps and panic anyway.)

- Don't refer to `in_Debugger'.
- Add `db_active' to i386/i386/db_interface.d (as in
  alpha/alpha/db_interface.c).
- Remove cnpollc() stub from ddb/db_input.c.
- Add the dbctl function to syscons, pcvt, and sio. (The function for
  pcvt and sio is noop at the moment.)

Jointly developed by: bde and me

(The final version was tweaked by me and not reviewed by bde.  Thus,
if there is any error in this commit, that is entirely of mine, not
his.)

Some changes were obtained from: NetBSD
2000-01-11 14:54:01 +00:00
Peter Wemm
9928855f97 Recognize the GVC0505 (GVC 56k Faxmodem) as a sio device.
Obtained from: Dan J Fraser <dfraser@capybara.org> (for NetBSD)
1999-12-27 05:02:25 +00:00
Peter Wemm
684fb19e34 Extract a list of extra isa pnp modem ID's from NetBSD and OpenBSD. Some
of these are bound to have a PNP05xx compatid, but there's no easy way to
tell.  Since it's just an ID list and uses the pnp header's description
strings rather than encoding strings here, it doesn't seem to be too
expensive to err on the safe side.
1999-12-21 09:16:03 +00:00
Peter Wemm
99c215c08b Add SUP2070 (Diamond SupraExpress 56i)
Submitted by:  Kenneth Wayne Culver <culverk@wam.umd.edu>

Add MOT4560
Obtained from: wollman
1999-12-20 20:31:23 +00:00
Warner Losh
0712c356a3 o Make pccard work at all by including card.h
o fix return type of sio_pccard_detach
o don't free softc in deatch, since that is done by newbus
o disconnect interrupt we used to have.  Add cookie to com so that we can
  tear down the interrupt on unload
o Set gone earlier, but likely doesn't matter

This makes sio pccards work again.  Cards that are active when ejects may
not work (but they might, softc goes away quickly).

These changes are unreviewed by bde.  I'll make any style changes he wants.
1999-12-10 08:19:19 +00:00
Peter Wemm
4246912f31 Fix a pair of silly warnings that I introduced (that would have been
nasty on an Alpha or some other sizeof(int) != sizeof(long) machine).
1999-12-06 17:52:20 +00:00
Peter Wemm
d0029cf5f3 Use bus_get_resource() instead of bus_get_resource_start() as the latter
returns "0" on failure, which is indistinguishable from (say) irq 0.  This
should stop a couple of stray messages that turn up.

Also, if a BUS_SETUP_INTR() fails with INTR_TYPE_FAST, try falling back to
a normal interrupt.  This might help pccard folks with a shared slot
interrupt.  This whole thing needs to be revisited.
1999-12-06 06:47:02 +00:00
Warner Losh
e09f49b6fa Fix the hang on card eject problem and maybe the hang on suspend
problem.

o Create new timeout routine so we don't detach the card inside a ISR
  but instead drop back to spl0 via a timeout of 0.
o Actually delete the child of the pccard device rather than just faking
  it badly.
o Fix sio, ed and ep to have pccard detach routines that are int rather
  than void.
o Fix ep and ed pccard detach routines to use if_detach rather than just
  if_down.  if_detach destroys the device, while if_down just marks it
  down.  In this incarnation of the pccard things, we map the disable
  the slot action to detach the driver, which removes the driver from the
  device tree.  When that is done, a panic would soon follow as the
  ifconfig tried to down the device.

Didn't fix:
o Should cache the pccard dev child's pointer in struct slot
o remove now unused parts of struct slot
o Any driver using softc after detach has been called.  sio's softc used
  to be statically allocated, so you could check sc->gone, but that is
  now gone.
o Didn't remove gone from softc of drivers that use the old pccard method.

Didn't test:
o ed driver changes
o sio driver changes on pccards
o suspend (no laptop or apm support on my desktop)
1999-12-01 07:38:54 +00:00