bectl list -a should show the boot environment, its relevant dataset, and
the snapshot it was created from. The header also changes to indicate the
rough order in which these things will show.
While here, start doing a little bit of spring cleaning and splitting
different bits out.
The jail is created with allow.mount, allow.mount.devfs, and
enforce_statfs=1. Upon creation, we immediately attach, chdir to "/", and
drop the user into a shell inside the jail.
The default IP for this is arbitrarily 10.20.30.40.
The given parameter may either be a jid, jail name, or a BE name. In all
cases, the parameter will be resolved to a jid and bectl(8) will
sanity-check that there's actually a BE mounted at the requested jail root
before invoking jail_remove(2).
At a bare minimum, this function will return 0 if a BE is mounted at the
given path or non-zero otherwise. If the optional 'details' nvlist is
supplied, it is filled with an nvpair containing just the information about
the BE mounted at the path. This nvpair is structured just as it is for
be_get_bootenv_props, except limited to just the single mount point.
Based on the idea that we shouldn't have all-new library and utility going
into base that need WARNS=1...
- Decent amount of constification
- Lots of parentheses
- Minor other nits
For the moment, this is a primitive nvlist dump of what we get back from
be_get_bootenv_props as a proof-of-concept and to make sure that we're
getting back the kind of information we want to see from list.
This makes us more resilient to a rename of the bootfs, but still wouldn't
withstand pool renames or guid renames. More importantly, this allows `bectl
create <foo>` work out of the box to create a boot environment based on the
currently booted one.
- Rename 'active' to 'rootfs', which is used in other places to describe the
currently booted (or about to be booted) BE.
- Add 'bootfs', which indicates the next boot environment to be booted. This
is pulled from the BOOTFS zpool property.
- Go ahead and keep an open handle to the active zpool. We might need to
enumerate datasets, get properties, and set properties (e.g. bootfs)
throughout other libbe bits, and a single handle isn't overly expensive.
Perhaps using libbe.a from "${DESTDIR}${LIBDIR}" might have been the
prevailing technique at one point, but nowadays it appears to be to
preferred to spell this as "${OBJTOP}/lib" -- make it so.
of NaNs before possible returning a NaN.
The remquo*() and remainder*() functions should now give bitwise identical
results across arches and implementations, and bitwise consistent results
(with lower precisions having truncated mantissas) across precisions. x86
already had consistency across amd64 and i386 and precisions by using the
i387 consistently and normally not using the C versions. Inconsistencies
for C reqmquol() were first detected on sparc64.
Remove double second clearing of the sign bit and extra blank lines.
[ELF] Update addends in non-allocatable sections for REL targets when
creating a relocatable output.
LLVM PR: 37735
LLVM Differential Revision: https://reviews.llvm.org/D48929
PR: 225128
Obtained from: LLVM r336799 by Igor Kudrin
remainder*(x, y) and remquo*(x, y, quo) were broken for y = 0 by changing
multiplication by y to addition of y. (When y is 0, the result should be
NaN but became 1 for finite x.)
Use a new macro nan_mix_op() to give more control over the mixing, and
expand comments.
Recent re-testing missed finding this bug since I only tested the macro
version on amd64 and i386 and these arches don't use the C versions (they
use either asm versions or builtins).
Reported by: enh via freebsd-numerics
jedec_dimm(4) is a superset of the functionality of jedec_ts(4). Mark
jedec_ts(4) as removed in FreeBSD 12, and include a pointer to the migration
instructions in the jedec_dimm(4) manpage, in both the jedec_ts(4) code and
the jedec_ts(4) manpage. Add a note to the jedec_dimm(4) manpage about the
fact that it is a superset of jedec_ts(4).
This change will be MFCed to stable/11 and stable/10; the followup change
to actually remove jedec_ts(4) from -HEAD will not.
Reviewed by: avg
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16412
they use same passphrase and keyfiles.
Unique salt will be randomly generated for each provider to ensure the
Master Key for each is unique.
This change follows on from r335673 and r336602, which allowed multiple
providers to be attached in a single command.
Reviewed by: asomers
Approved by: sobomax
Differential Revision: https://reviews.freebsd.org/D16115
loading.
If we are booting in a conforming UEFI Boot Manager Environment, then
use the BootCurrent variable to find the BootXXXX we're using. Once we
find that, then if it contains more than one EFI_DEVICE_PATH in its
what to boot section, try to use the last one as the kernel to
load. This will also set the default root partition as well. If
there's only one path, or if there's an error along the way, assume
that nothing specific was specified and revert to the old
algorithm. If something was specified, but not found, then fail the
boot. Otherwise you that, specific thing. On FreeBSD, this can be set
using efibootmgr -l <loader> -k <kernel>. We try a few variations of
kernel to cope with the fact that UEFI comes from a DOS world where
paths might be upper case and/or contain back-slashes.
Note: In an ideal world, we'd work out where we are in chain loading
by looking at the passed-in image handle and doing name
matching. However, that's unreliable since at least boot1.efi booted
images don't have that, hence the assumption that loader.efi needs to
load the last thing on the list, if possible.
The reason we fail for something specific is so that we can fully
participate in the UEFI Boot Manager Protocol and fail over to the
next item in the list of BootOrder choices when something goes wrong
at this stage.
This implements was was talked about in freebsd-arch@ last year
https://docs.freebsd.org/cgi/getmsg.cgi?fetch=3576+0+archive/2017/freebsd-arch/20171022.freebsd-arch
and documented in full (after changed resulting from the discussion) in
https://docs.google.com/document/d/1aK9IqF-60JPEbUeSAUAkYjF2W_8EnmczFs6RqCT90Jg/edit#
although one or two minor details may have been modified in this
implementation to make it work, and the ZFS MEDIA PATH extension isn't
implemented. This does not yet move things to ESP:\efi\freebsd\loader.efi.
RelNotes: Yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16403
Lookup a block device by it's device path. We use a 'loose' lookup
whereby we scan forward to the first Media Path portion of the device
path, then look at all our handles for one whose first Media Path
matches. This will also work if the device path pointed to has a
following file path (or paths) as that's ignored. It assumes that
there's only one media path node that describes the entire device,
which is true as of the latest UEFI spec (2.7 Errata A) as far as I've
been able to determine.
Sponsored by: Netflix
Returns true if the first node pointed to by devpath1 is identical to
the first node pointed to by devpath2, with care taken to not read
past the end of the valid parts of either devpath1 or
devpath2. Otherwise, returns false.
Sponsored by: Netflix
Takes a generic device path as its input. Scans through it to find the
first media_path node in it and returns a pointer to it. If none is
found, NULL is returned.
Sponsored by: Netflix
Compilers may define multiple variants of architecture-specific macros
(for example, both __x86_64 and __x86_64__). Add a note that the macros
documented in arch.7 are the preferred ones for FreeBSD.
Sponsored by: The FreeBSD Foundation
Temporarily decompress a copy of a crash dump compressed with either
gzip or zstd and run various tools against the decompressed copy while
generating the crash information. The uncompressed copy is deleted when
the script exits.
Note that crashinfo is enabled by default, so this will attempt to
decompress the most recent compressed crash dump after a crash that
generates a compressed crash dump. Users who wish to only do offline
analysis of compressed crash dumps can disable crashinfo in rc.conf.
Tested by: ler
Reviewed by: markj
MFC after: 2 weeks
