surrounding the undef'ing it. It does not seem necessary to
undef some symbol that is not exist, and gcc does not complain
about whether a symbol is exist before #undef'ing it out.
Spotted by: mingyanguo via ChinaUnix.net forum
Reviewed by: phk
it type and endian clean and removing of stdio dependency from NLS
functions (catalog files now are processed via mmap())
Also following changes were done (against NetBSD version):
. If mmap() failed, set errno to EINVAL and do not try to munmap() file
Obtained from: NetBSD
. Replace inclusion of sys/param.h to sys/cdefs.h and sys/types.h where
appropriate.
. move _*_init() prototypes to mblocal.h, and remove these prototypes
from .c files
. use _none_init() in __setrunelocale() instead of duplicating code
. move __mb* variables from table.c to none.c allowing us to not to
export _none_*() externs, and appropriately remove them from mblocal.h
Ok'ed by: tjr
introducing the disk formats for _RuneLocale and friends.
The disk formats do not have (useless) pointers and have 32-bit
quantities instead of rune_t and long. (htonl(3) only works
with 32-bit quantities, so there's no loss).
Bootstrap mklocale(1) when necessary. (Bootstrapping from 4.x
would be trivial (verified), but we no longer provide pre-5.3
source upgrades and this is the first commit to actually break
it.)
manpages. They are not very related, so separating them makes it
easier to add meaningful cross-references and extend some of the
descriptions.
- Move the part of math(3) that discusses IEEE 754 to the ieee(3)
manpage.
FreeBSD currently implements the most up to date IPv6 APIs for
option and route header parsing. This checkin marks the older APIs
as deprecated and points the reader to the newer pages.
Reviewed by: Jun-ichiro Itojun
Approved by: rwatson (mentor)
- Although ldexp() is in libc for backwards compatibility, ldexpf() is
in its proper place in libm. Document both as being in libm.
- The ldexp() and ldexpf() functions conform to C99.
- Neither frexp() nor frexpf() set errno.
- Although frexp() is in libc for backwards compatibility, frexpf() is
in its proper place in libm. Document both as being in libm.
- The frexp() and frexpf() functions conform to C99.
Reviewed by: Kame Project (including Itojun-san, Jinmei-san and Suzuki-san)
Approved by: Robert Watson (robert at freebsd dot org)
Obtained from: Kame Project and OpenBSD
Replace manual pages that may have violated the IETF's Copyright.
All come from the Kame tree.
Several were from OpenBSD except for ip6.4, and the inet6* pages which were
rewritten by me.
All of the text is new and drawn from reading the code and
documentation.
Approved by: Robert Watson (robert at freebsd dot org)
Remove files in preparation for replacement with totally new versions
of the manual pages.
Update the Makefile to handle the new file to be added.
scalbn() implementation from libm. (The two functions are defined to
be identical, but ldexp() lives in libc for backwards compatibility.)
The old ldexp() implementation...
- was more complicated than this one
- set errno instead of raising FP exceptions
- got some corner cases wrong
(e.g. ldexp(1.0, 2000) in round-to-zero mode)
The new implementation lives in libc/gen instead of
libc/$MACHINE_ARCH/gen, since we don't need N copies of a
machine-independent file. The amd64 and i386 platforms
retain their fast and correct MD implementations and
override this one.
really so.
"If the value of base is 16, the characters 0x or 0X may optionally
precede the sequence of letters and digits, following the sign if
present."
Found by: joerg
instead use the FPU to convert subnormals to normals. (NB: Further
simplification is possible, such as using the FPU for the rounding
step.)
This fixes a bug reported by stefanf where long double subnormals in
the Intel 80-bit format would be output with one fewer digit than
necessary when the default precision was used.
Eliminate gdtoa.mk and move its contents to ${MACHINE_ARCH}/Makefile.inc.
The purpose of having a separate file involved an abandoned scheme that
would have kept contrib/gdtoa out of the include path for the rest of libc.
GNU) for determining whether a string is an affirmative or negative
response to a question according to the current locale. This is done
by matching the response against nl_langinfo(3) items YESEXPR and NOEXPR.
make utilities like du(1) 64bit-clean.
When this field is used, one cannot use 'fts_number' and 'fts_pointer'
fields.
This commit doesn't break API nor ABI.
This work is part of the BigDisk project:
http://www.FreeBSD.org/projects/bigdisk/
Discussed on: arch@
MFC after: 5 days
which doesn't end in \n, since it may be very confusing. Also this should
increase consistency, since most other config files work just fine regardless
of the presence of traling \n in the last line.
MFC After: 2 weeks
a "null pointer".''
Making good use of the excellent explanations sent to me by Ruslan
Ermilov, Garrett Wollman and Bruce Evans, correct the descriptions of
null pointers. They are just "null pointers", not nil, not NULL or
".Dv NULL".
Suggested by: ru, wollman, bde
Reviewed by: ru, wollman
Pointy hat: keramida
sigdelset(3) and sigismember(3) were killed about five years ago.
o The functions (specifically sigismember(3)) could return -1 and
set errno.
PR: bin/75156
Obtained from: NetBSD
MFC after: 2 weeks
o Bump the date of the document.
http://www.opengroup.org/onlinepubs/009695399/functions/swab.html
the prototype for swab() should be in <unistd.h> and not in <string.h>.
Move it, and update to match SUS. Leave the prototype in string.h for
now, for backwards compat.
PR: 74751
Submitted by: Craig Rodrigues <rodrigc@crodrigues.org>
Discussed with: das
operation (by subtracting the absolute result from 0), don't test
for overflow.
This avoids an arithmetic exception when dividing LONG_MIN by 1:
This is the only case that causes overflow, and the resulting value
is correct under 2's compliment arithmetic.
PR: 72024
Approved by: dwmalone@
Obtained from: NetBSD
MFC after: 4 days
reading past 'stop' in various places when converting multibyte characters.
Reading too far caused truncation to not be detected when it should have
been, eventually causing regexec() to loop infinitely in with certain
combinations of patterns and strings in multibyte locales.
PR: 74020
MFC after: 4 weeks
is supported.
-Document the new more preferred syntax
-Add examples for the new syntax
-Add a note that the old syntax will be deprecated in the future.
Reviewed by: rwatson
If turned on no NIS support and related programs will be built.
Lost parts rediscovered by: Danny Braniss <danny at cs.huji.ac.il>
PR: bin/68303
No objections: des, gshapiro, nectar
Reviewed by: ru
Approved by: rwatson (mentor)
MFC after: 2 weeks
seed, the random number generator rand(3) still sucks and is unlikely
sufficient for crypto use. Correct what appears to be a cut and paste
error from the srandomdev() man page.
Submitted by: Ben Mesander
can't use the i386_set_ldt() family of routines, because they are not
implemented. Instead, use the recently exposed direct access sysarch
routines for setting what %fs and %gs point to.
Use this for the i386 TLS _set_tp() routine, but only when compiling to
run as a 32 bit support binary for amd64 kernels.
syslog(3) if we are a priveleged program (sshd, su, etc.).
- Make syslogd open an additional socket /var/run/logpriv, with 0600
permissions.
- In libc, try to use this socket.
- Do not loop forever if we are using this socket (partial backout of 1.31)
Reviewed by: dwmalone, Andrea Campi <andrea webcom it>
Approved by: julian (mentor)
MFC after: 1 month
_(use space as padding), and 0(zero padding).
These GNU extensions are widely used ones that is worthy for us to
have.
Discussed with: stefanf, roam, -current
Approved by: murray
Prodded by: ports/72722, ports/72723
MFC After: 1 month
Requested by: bde
o Remove unneeded sys/types.h and netinet/in.h from the synopsis and
the example.
o We do have struct in_addr in arpa/inet.h, so no need for netinet/in.h.
o Mention where AF_* constants defined are.
Educated by: bde
__isnan() and __isnanf() must remain in libc for hysterical raisins.
On the other hand, __isnanl() must live in libm because libm uses it
internally and can't depend on older versions of libc to provide it.
Fortunately, we don't need __isnanl() in both libraries.
Prodded by: ale
PR: 71698
MT5 candidate
caused by refering broken (uninitialized?) pointer which is retrieved
from __bt_new() (and from mpool_new()).
I don't know why this linp[0] is read before stored because this
should be controlled by .lower and .upper member of PAGE structure
which are correctly initialized.
But this workaround fixes the problem on my environment and this
module has #ifdef PURIFY option which initializes new and reused
memory from mpool by memset(p, 0xff, size) like as I did.
Please feel free to fix the real bug instead of my workaround.
multibyte character support:
- In CHadd(), avoid writing past the end of the character set bitmap when
the opposite-case counterpart of wide characters with values less than
NC have values greater than or equal to NC.
- In CHaddtype(), fix a braino that caused alphabetic characters to be
added to all character classes! (but only with REG_ICASE)
PR: 71367
By using r8 instead of r14 to do the swap, we put the dst argument
in the return register. Since bcopy() doesn't clobber r8, we don't
have to do anything else. This fixes ports/textproc/aspell.
documenting the obsoleteness of the msync(2) syscall and its single
remaining purpose.
PR: 70916
Submitted by: Radim Kolar <hsn@netmag.cz>
MFC after: 3 days
mpool_open(3) - it is *not* really used for synchronization; in fact,
it is not used at all.
PR: 70929
Submitted by: Martin Kammerhofer <dada@sbox.tugraz.at>
MFC after: 3 days
_mcount() stub when profiling is enabled. Emit this code sequence
for assembly routines as welli (MCOUNT definition in <machine/asm.h>.
We do not pass the GOT entry however as the 4th argument, because it's
not used. The _mcount() stub calls __mcount(), which does the actual
work. Define _MCOUNT_DECL to define __mcount. We do not have an
implementation of mcount(), so we define MCOUNT as empty, but have a
weak alias to _mcount() in _mcount.S.
Note that the _mcount() stub in the kernel is slightly different from
the stub in userland. This is because we do not have to worry about
nested routines in the kernel.
64 bit systems, years roughly -2^31 through 2^31 can be represented in
time_t without any trouble. 32 bit time_t systems only range from
roughly 1902 through 2038. As a consequence, none of the date munging
code for all the various calendar tweaks before then is present. There
are other problems including the fact that there was no 'year zero' and
so on. So rather than get excited about trying to figure out when the
calendar jumped by two weeks etc, simply disallow negative (ie: prior to
1900) years.
This happens to have an important side effect. If you bzero a 'struct
tm', it corresponds to 'Jan 0, 1900, 00:00 GMT'. This happens to be
representable (after canonification) in 64 bit time_t space. Zero tm
structs are generally an error and mktime normally returns -1 for them.
Interestingly, it tries to canonify the 'jan 0' to 'dec 31, 1899', ie:
year -1. This conveniently trips the negative year test above, which
means we can trivially detect the null 'tm' struct.
This actually tripped up code at work. :-/ (Don't ask)
19 column positions wide in the first line and 20 in the rest of the lines.
This fixes the example to provide the correct output.
PR: 53454
Noticed by: Kuang-che Wu <kcwu@kcwu.homeip.net>
Submitted by: Marc Silver <marcs@draenor.org>
Approved by: re (scottl)
example. The externs haven't been needed in about 10 years, so
there's no reason to have them other than for hysterical raisins. And
the California Rasins haven't been around for a long time...
to describe the 4.4BSD extension of accepting arguments outside the range
of unsigned char. This gives us freedom to remove this extension when we
remove the <rune.h> interface in FreeBSD 6.
These convert plain ASCII characters in-line, making them only slightly
slower than the single-byte ("NONE" encoding) version when processing
ASCII strings.
convenient when the source string isn't null-terminated.
Implement the other conversion functions (mbstowcs(), mbsrtowcs(), wcstombs(),
wcsrtombs()) in terms of these new functions.
for statfs(2). This is false, if the pathname specified
is a regular file, then the information for the file
system that the file lives on will be returned.
Approved by: bmilekic (mentor)
gcc is using. This fixes devstat consumers (like vmstat, iostat,
systat) so they don't print crazy zillion digit numbers for
disk transfers and bandwidth.
According to gcc, long doubles are 64-bits, rather than 128 bits
like the SVR4 ABI spec wants them to be.. Note that MacOSX also treats
long doubles as 64-bits, and not 128 bits, so we are in good company.
Reviewed by: das
Approved by: grehan
- It was added to libc instead of libm. Hopefully no programs rely
on this mistake.
- It didn't work properly on large long doubles because its argument
was converted to type double, resulting in undefined behavior.
The getfsstat(2) function expects a buffer and a count, and returns a count.
The confusing part is that the count it takes is a byte count, while the
return value is a count of the number of structures it has filled out.
Spell this out.
idea is that we perform multibyte->wide character conversion while parsing
and compiling, then convert byte sequences to wide characters when they're
needed for comparison and stepping through the string during execution.
As with tr(1), the main complication is to efficiently represent sets of
characters in bracket expressions. The old bitmap representation is replaced
by a bitmap for the first 256 characters combined with a vector of individual
wide characters, a vector of character ranges (for [A-Z] etc.), and a vector
of character classes (for [[:alpha:]] etc.).
One other point of interest is that although the Boyer-Moore algorithm had
to be disabled in the general multibyte case, it is still enabled for UTF-8
because of its self-synchronizing nature. This greatly speeds up matching
by reducing the number of multibyte conversions that need to be done.
consequently the exponent is only 11 bits. Testing whether the
exponent equals 32767 in that case only effects to compiler warnings
and thus build breakage.
isnormal() the hard way, rather than relying on fpclassify(). This is
a lose in the sense that we need a total of 12 functions, but it is
necessary for binary compatibility because we have never bumped libm's
major version number. In particular, isinf(), isnan(), and isnanf()
were BSD libc functions before they were C99 macros, so we can't
reimplement them in terms of fpclassify() without adding a dependency
on libc.so.5. I have tried to arrange things so that programs that
could be compiled in FreeBSD 4.X will generate the same external
references when compiled in 5.X. At the same time, the new macros
should remain C99-compliant.
The isinf() and isnan() functions remain in libc for historical
reasons; however, I have moved the functions that implement the macros
isfinite() and isnormal() to libm where they belong. Moreover,
half a dozen MD versions of isinf() and isnan() have been replaced
with MI versions that work equally well.
Prodded by: kris
class. This is necessary in order to implement tr(1) efficiently in
multibyte locales, since the brute force method of finding all characters
in a class is infeasible with a 32-bit (or wider) wchar_t.
under the RETURN VALUES section so it is consistent with others.
Cleanup the return value text for getenv(3) a little while I am here.
PR: docs/58033
MFC after: 3 days
