- Remove all:. It's redundant, and ${LIB} in it is just a bug.
- Remove .ORDER:. *.mgc files can safely be built in parallel.
- Remove PITA. The mkmagic tool is smart to put the binary file
into the current directory (${.OBJDIR}) even if the source file
lives somewhere else, which is just what we need.
manpages. They are not very related, so separating them makes it
easier to add meaningful cross-references and extend some of the
descriptions.
- Move the part of math(3) that discusses IEEE 754 to the ieee(3)
manpage.
Only supports "deflate" and "none" compression for now.
Also, add a few clarifications to the archive_read.3 manpage as
requested by William Dean DeVries.
copy the acquired TGT from the in-memory cache to the on-disk cache
at login. This was documented but un-implemented behavior.
MFC after: 1 week
PR: bin/64464
Reported and tested by: Eric van Gyzen <vangyzen at stat dot duke dot edu>
FreeBSD currently implements the most up to date IPv6 APIs for
option and route header parsing. This checkin marks the older APIs
as deprecated and points the reader to the newer pages.
Reviewed by: Jun-ichiro Itojun
Approved by: rwatson (mentor)
- Rearrange the list of functions into categories.
- Remove the ulps column. It was appropriate for only some
of the functions in the list, and correct for even fewer
of them.
- Add some new paragraphs, and remove some old ones about
NaNs that may do more harm than good.
- Document precisions other than double-precision.
- Although ldexp() is in libc for backwards compatibility, ldexpf() is
in its proper place in libm. Document both as being in libm.
- The ldexp() and ldexpf() functions conform to C99.
- Neither frexp() nor frexpf() set errno.
- Although frexp() is in libc for backwards compatibility, frexpf() is
in its proper place in libm. Document both as being in libm.
- The frexp() and frexpf() functions conform to C99.
Reviewed by: Kame Project (including Itojun-san, Jinmei-san and Suzuki-san)
Approved by: Robert Watson (robert at freebsd dot org)
Obtained from: Kame Project and OpenBSD
Replace manual pages that may have violated the IETF's Copyright.
All come from the Kame tree.
Several were from OpenBSD except for ip6.4, and the inet6* pages which were
rewritten by me.
All of the text is new and drawn from reading the code and
documentation.
Approved by: Robert Watson (robert at freebsd dot org)
Remove files in preparation for replacement with totally new versions
of the manual pages.
Update the Makefile to handle the new file to be added.
scalbn() implementation from libm. (The two functions are defined to
be identical, but ldexp() lives in libc for backwards compatibility.)
The old ldexp() implementation...
- was more complicated than this one
- set errno instead of raising FP exceptions
- got some corner cases wrong
(e.g. ldexp(1.0, 2000) in round-to-zero mode)
The new implementation lives in libc/gen instead of
libc/$MACHINE_ARCH/gen, since we don't need N copies of a
machine-independent file. The amd64 and i386 platforms
retain their fast and correct MD implementations and
override this one.
really so.
"If the value of base is 16, the characters 0x or 0X may optionally
precede the sequence of letters and digits, following the sign if
present."
Found by: joerg
instead use the FPU to convert subnormals to normals. (NB: Further
simplification is possible, such as using the FPU for the rounding
step.)
This fixes a bug reported by stefanf where long double subnormals in
the Intel 80-bit format would be output with one fewer digit than
necessary when the default precision was used.
for libarchive error messages. Mostly, this
avoids a portability headache related to
copying va_list arguments (some FreeBSD 5
platforms require va_copy; FreeBSD 4 doesn't
support va_copy at all). It also dramatically reduces the
size of libarchive for embedded applications:
a minimal "untar" program using libarchive can now be
under 64k statically linked (as opposed to ~100k
using library *printf() functions).
MFC after: 14 days
Eliminate gdtoa.mk and move its contents to ${MACHINE_ARCH}/Makefile.inc.
The purpose of having a separate file involved an abandoned scheme that
would have kept contrib/gdtoa out of the include path for the rest of libc.
flags, so they are not pure. Remove the __pure2 annotation from them.
I believe that the following routines and their float and long double
counterparts are the only ones here that can be __pure2:
copysign is* fabs finite fmax fmin fpclassify ilogb nan signbit
When gcc supports FENV_ACCESS, perhaps there will be a new annotation
that allows the other functions to be considered pure when FENV_ACCESS
is off.
Discussed with: bde
basically support this, subject to gcc's lack of FENV_ACCESS support.
In any case, the previous setting of math_errhandling to 0 is not
allowed by POSIX.
registers as volatile. Instructions that *wrote* to FP state were
already marked volatile, but apparently gcc has license to move
non-volatile asms past volatile asms. This broke amd64's feupdateenv
at -O2 due to a WAR conflict between fnstsw and fldenv there.
GNU) for determining whether a string is an affirmative or negative
response to a question according to the current locale. This is done
by matching the response against nl_langinfo(3) items YESEXPR and NOEXPR.
make utilities like du(1) 64bit-clean.
When this field is used, one cannot use 'fts_number' and 'fts_pointer'
fields.
This commit doesn't break API nor ABI.
This work is part of the BigDisk project:
http://www.FreeBSD.org/projects/bigdisk/
Discussed on: arch@
MFC after: 5 days
which doesn't end in \n, since it may be very confusing. Also this should
increase consistency, since most other config files work just fine regardless
of the presence of traling \n in the last line.
MFC After: 2 weeks
* Reference-count the directory data so that
we don't leak memory.
* Correctly step through the directory records
(skipping unrecognized extensions)
* Use better defaults for file modes
* Sort directory entries by offset of the end of the file
rather than the beginning of the file. This fixes a
lot of "out-of-order" problems with zero-length files,
in particular.
* Style fixes, remove some debug code, add some error messages.
This seems to be able to extract a TOC and extract files from
the couple of ISO images I've tested it with.
Treat this as experimental proof-of-concept code for the
moment. There are still a bunch of debug messages (there
are a few oddities in ISO9660 that I haven't yet figured
out how to handle), a lot of bugs to be addressed (this
code leaks memory very badly), and a lot of missing features (no
Rockridge support, in particular). I'd appreciate
feedback from anyone who understands ISO9660 format
better than I do. ;-)
Suggested by: Robert Watson
the regular ustar entry. The old code sometimes created
a too-long name that overflowed the ustar fields and triggered
an internal assertion failure. This version should be more
robust.
Thanks to: Michal Listos
Fixes: bin/74385
MFC after: 15 days
a "null pointer".''
Making good use of the excellent explanations sent to me by Ruslan
Ermilov, Garrett Wollman and Bruce Evans, correct the descriptions of
null pointers. They are just "null pointers", not nil, not NULL or
".Dv NULL".
Suggested by: ru, wollman, bde
Reviewed by: ru, wollman
Pointy hat: keramida
ustar fields. Later, we're going to permit numeric extensions
for these fields, so we can support large values here. In particular,
this allows GNU tar to correctly extract such entries even
though it doesn't support the pax extended attributes.
Note: r1.18 and r1.17.2.1 of this file allowed similar treatment
of the uid/gid fields.
Thanks to: Ben Mesander
improves the recognition of hardlink entries
with/without bodies (which is implemented through
a look-ahead that uses the bid function).
MFC after: 7 days
signals instead of having more intricate knowledge of thread state
within signal handling.
Simplify signal code because of above (by David Xu).
Use macros for libpthread usage of pthread_cleanup_push() and
pthread_cleanup_pop(). This removes some instances of malloc()
and free() from the semaphore and pthread_once() implementations.
When single threaded and forking(), make sure that the current
thread's signal mask is inherited by the forked thread.
Use private mutexes for libc and libpthread. Signals are
deferred while threads hold private mutexes. This fix also
breaks www/linuxpluginwrapper; a patch that fixes it is at
http://people.freebsd.org/~deischen/kse/linuxpluginwrapper.diff
Fix race condition in condition variables where handling a
signal (pthread_kill() or kill()) may not see a wakeup
(pthread_cond_signal() or pthread_cond_broadcast()).
In collaboration with: davidxu
sigdelset(3) and sigismember(3) were killed about five years ago.
o The functions (specifically sigismember(3)) could return -1 and
set errno.
PR: bin/75156
Obtained from: NetBSD
MFC after: 2 weeks
o Bump the date of the document.
device numbers. In particular, this should fix
a bug where archiving a device node with a very
large minor number would sometimes overflow and
corrupt the major number.
Thanks to: Ben Mesander
MFC after: 7 days
http://www.opengroup.org/onlinepubs/009695399/functions/swab.html
the prototype for swab() should be in <unistd.h> and not in <string.h>.
Move it, and update to match SUS. Leave the prototype in string.h for
now, for backwards compat.
PR: 74751
Submitted by: Craig Rodrigues <rodrigc@crodrigues.org>
Discussed with: das
ID ranges that consist of exactly one attribute ID. libsdp(3) will check start
and end of the attribute ID range and if they are the same the range will be
collapsed to one atribute ID.
The problem was observed on Audiovox SMT5600 and Palm Treo 650.
MFC after: 3 days
regular 'ustar' entry, use narrow-character version,
not wide-character version, as the ustar entry always
uses the narrow-character filename.
Thanks to: Michal Listos
Inspired by, but doesn't fix: bin/74385
operation (by subtracting the absolute result from 0), don't test
for overflow.
This avoids an arithmetic exception when dividing LONG_MIN by 1:
This is the only case that causes overflow, and the resulting value
is correct under 2's compliment arithmetic.
PR: 72024
Approved by: dwmalone@
Obtained from: NetBSD
MFC after: 4 days
reading past 'stop' in various places when converting multibyte characters.
Reading too far caused truncation to not be detected when it should have
been, eventually causing regexec() to loop infinitely in with certain
combinations of patterns and strings in multibyte locales.
PR: 74020
MFC after: 4 weeks
is supported.
-Document the new more preferred syntax
-Add examples for the new syntax
-Add a note that the old syntax will be deprecated in the future.
Reviewed by: rwatson
the the pax attributes, I shouldn't try using the public
API for finishing out the attribute entry, either.
This also removes some old dubious state manipulations.
because the code was using the external API
(archive_write_data) and assuming internal
error-return conventions. Use the internal
API for writing data.
Thanks to: Joe Marcus Clarke
If turned on no NIS support and related programs will be built.
Lost parts rediscovered by: Danny Braniss <danny at cs.huji.ac.il>
PR: bin/68303
No objections: des, gshapiro, nectar
Reviewed by: ru
Approved by: rwatson (mentor)
MFC after: 2 weeks
seed, the random number generator rand(3) still sucks and is unlikely
sufficient for crypto use. Correct what appears to be a cut and paste
error from the srandomdev() man page.
Submitted by: Ben Mesander
run as a 32 bit support library for an amd64 kernel. 32 bit consumers of
libthr have zero chance of running on an amd64 kernel since we don't
implement the i386_set_ldt() family of functions. Note that this commit
doesn't make it actually work, it just removes one more obstacle.
can't use the i386_set_ldt() family of routines, because they are not
implemented. Instead, use the recently exposed direct access sysarch
routines for setting what %fs and %gs point to.
Use this for the i386 TLS _set_tp() routine, but only when compiling to
run as a 32 bit support binary for amd64 kernels.
syslog(3) if we are a priveleged program (sshd, su, etc.).
- Make syslogd open an additional socket /var/run/logpriv, with 0600
permissions.
- In libc, try to use this socket.
- Do not loop forever if we are using this socket (partial backout of 1.31)
Reviewed by: dwmalone, Andrea Campi <andrea webcom it>
Approved by: julian (mentor)
MFC after: 1 month
_(use space as padding), and 0(zero padding).
These GNU extensions are widely used ones that is worthy for us to
have.
Discussed with: stefanf, roam, -current
Approved by: murray
Prodded by: ports/72722, ports/72723
MFC After: 1 month
packages expect and seems to be most correct according to the slightly-
ambiguous standards.
MFC after: 1 month
Corroborated by: POSIX <http://tinyurl.com/4uvub>
Reviewed by: silence on threads@
the GPT partition on i386 and adm64 as type=gpt, subtype=0 and with the
sname set to the UUID. This prevents sysinstall from bombing out. This
also makes sure the GPT partition shows up in sysinstall so as to avoid
accidental "clobberage".
PR: bin/72896
file. In particular, this allows bsdtar to append (-r) to
an empty file.
Thanks to: Ryan Sommers
While I'm here, straighten out a misleading comment about GNU-compatible
sparse file handling.
put DEAD thread on GC list, this closes a race between pthread_join
and thr_cleanup.
2. Introduce a mutex to protect tcb initialization, tls allocation and
deallocation code in rtld seems no lock protection or it is broken,
under stress testing, memory is corrupted.
Reviewed by: deischen
patch partly provided by: deischen
probably means it also requires a .so version
bump. Defer it until I finish some related
work on cleaning up error returns throughout
the library.
Thanks to: Conrad J. Sabatier
no userland locks are heald, the dead thread lock can no longer protect
access to it. Therefore, instead of using an if (!dead)...else clause
after walking the active threads list test the thread pointer before
deciding not to walk the dead threads list. If the thread pointer is null
it means it was not found in the active threads list and the dead threads
list should be checked.
2. Do not free the stack of a thread that is not marked dead. This is the
2nd and final part of eliminating the race to free a thread's stack.
MFC after: 3 days
