This allows building a container image with enough functionality for
downloading and installing packages without having to include the
utilities package.
Reviewed by: manu
MFC after: 2 weeks
Some software uses SMBIOS entries to identify the system on which it's
running. In order to make it possible to use such software inside a VM,
SMBIOS entries should be configurable. Therefore, bhyve_config can be
used. While only a few SMBIOS entries might be of interest, it makes
sense that all SMBIOS entries are configurable. This way all SMBIOS
tables are build the same way and there's no special handling for some
tables.
Reviewed by: jhb
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34465
Don't shadow an already-local variable with another local declaration.
Reported by: dteske
MFC after: 13 days
MFC with: caf73e5857
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D35331
If the ZFSBOOT_DISKS variable is set to one or more disk names, then
those disks should be preselected in the disk menu. However, the code
wasn't correctly setting the variable, leaving all disks unselected.
MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: dteske
Differential Revision: https://reviews.freebsd.org/D35331
Similar to the change in 1a04446f08, use
cat to overwrite the contents of the existing file rather than cp so
that metadata of the existing file such as permissions and ownership
is preserved.
PR: 255514
Reported by: uqs
MFC after: 1 week
When performing a dry run, remove the temporary tree created rather
than rotating the trees. Rotating the trees meant that etcupdate
thought the latest changes were already merged and would not merge
them on the next real run.
PR: 260281
Reported by: Tomoaki AOKI <junchoon@dec.sakura.ne.jp>
Fixes: 0611aec3cf etcupdate: Always extract to a temporary tree.
MFC after: 1 week
Otherwise, boot will hang if the numbering of disks has changed since
initial install.
MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: brd
Differential Revision: https://reviews.freebsd.org/D35309
Replace (LGPL) dialog utility with (BSD-2-Clause) bsddialog utility.
Add --hline info because bsddialog requires TAB to switch the focus on
buttons for an inputbox, dialog differs.
Delete f_dialog_inputbox_size() using libbsddialog autosizing.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D35285
Commit 72bf76d6b8 added the -2 option to use
TLS 1.2 NFS-over-TLS mounts. It did not add -2
to the usage message.
This patch adds -2 to the usage message.
MFC after: 2 weeks
Commit 0637b12b13 added the -2 option to allow
TLS 1.2 NFS-over-TLS mounts. It did not add -2
to the usage message.
This patch adds -2 to the usage message.
MFC after: 2 weeks
Since the KTLS now supports TLS1.3, the daemons default
to version 1.3, since the draft (to be an RFC someday)
requires TLS1.3.
However, since FreeBSD 13,0, 13,1 uses TLS1.2 for
NFS-over-TLS, the "-2" option is added to both daemons
for compatibility with FreeBSD 13.0, 13.1.
This patch updates the man pages for this.
This is a content change.
Reviewed by: pauamma_gundo.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35290
Since the KTLS now supports TLS1.3, the daemons default
to version 1.3, since the draft (to be an RFC someday)
requires TLS1.3.
However, since FreeBSD 13,0, 13,1 uses TLS1.2 for
NFS-over-TLS, the "-2" option is added to both daemons
for compatibility with FreeBSD 13.0, 13.1.
This patch updates the man pages for this.
This is a content change.
Reviewed by: pauamma_gundo.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35290
Commit f5b40aa0de modifies the -C command line option
for rpc.tlsclntd to use the TLS 1.3 SSL_CTX_set_ciphersuites().
This patch updates the man page for this modified command
line option.
This is a content change.
Reviewed by: jhb, pauamma_gundo.com (same change for rpc.tlsservd.8)
MFC after: 2 weeks
Commit 0b4f2ab0e9 fixes the krpc so that it can use TLS
version 1.3 for NFS-over-TLS, as required by
the draft (someday to be an RFC).
This patch replaces SSL_CTX_set_cipher_list() with
SSL_CTX_set_ciphersuites(), since that is the function
that is used for TLS1.3.
The man page will be updated in a separate commit.
MFC after: 2 weeks
Commit 0b4f2ab0e9 fixes the krpc so that it can use TLS
version 1.3 for NFS-over-TLS, as required by
the draft (someday to be an RFC).
This patch replaces SSL_CTX_set_cipher_list() with
SSL_CTX_set_ciphersuites(), since that is the function
that is used for TLS1.3.
The man page has already been updated.
MFC after: 2 weeks
Commit 712aac1389 adds a new -C command line option
to rpc.tlsservd.
This patch updates the man page for this new command
line option.
This is a content change.
Reviewed by: jhb, pauamma_gundo.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35136
bsdinstall(8) has an option to enable moused support.
However, if it is not selected, moused is still started
through the configuration of nondefault devices.
So, automatically add the moused_nondefault_enable="NO"
setting to rc.conf unless moused support is selected.
PR: 227999
Reported by: bcran
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D35193
Commit 0b4f2ab0e9 fixes the krpc so that it can use TLS
version 1.3 for NFS-over-TLS, as required by
the draft (someday to be an RFC).
Since FreeBSD 13.0, 13.1 use TLS version 1.2 for
NFS-over-TLS mounts, this command line option
may be used so that NFS-over-TLS mounts to 13.0, 13.1
servers will still work.
Without the command line option, NFS-over-TLS mounts
will use TLS version 1.3.
The man page update will be a separate commit.
MFC after: 2 weeks
Commit 0b4f2ab0e9 fixes the krpc so that it can use TLS
version 1.3 for NFS-over-TLS, as required by
the draft (someday to be an RFC).
Since FreeBSD 13.0, 13.1 use TLS version 1.2 for
NFS-over-TLS mounts, this command line option
may be used so that mounts from 13.0, 13.1 will still work.
Without the command line option, only TLS version 1.3
mounts are permitted.
The man page update will be a separate commit.
MFC after: 2 weeks
Add a sentence that explains that PATH is set to `/bin:/usr/bin`.
I had to dive into `jexec.c` to find this out.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D35251
Makefile.arm64 relies on being included via Makefile.${MACHINE}. This
only works when arm64 is the only aarch64 architecture. Switch to
Makefile.aarch64 so downstream CheriBSD can use the file when building
for Morello which uses a differen ${MACHINE} value.
Sponsored by: Innovate UK
When a new FS image is created we need to calculate how much space each
file is going to consume.
Fix two bugs in that logic:
1) Count the space needed for indirect blocks for large files.
1) Normally the trailing data of a file is written to a block of frag
size, 4 kB by default.
However for files that use indirect blocks a full block is allocated,
32kB by default. Take that into account.
Adjust size calculations to match what is done in ffs_mkfs routine:
* Depending on the UFS version the superblock is stored at a different
offset. Take that into account.
* Add the cylinder group block size.
* All of the above has to be aligned to the block size.
Finally, Remove "ncg" variable. It's always 1 and it was used to
multiply stuff.
PR: 229929
Reviewed by: mckusick
MFC after: 2 weeks
Sponsored by: Semihalf
Submitted by: Kornel Dulęba <mindal@semihalf.com>
Differential Revision: https://reviews.freebsd.org/D35131
Differential Revision: https://reviews.freebsd.org/D35132
Override OSNAME to change the name of the OS in the installer.
This is a first step, the shell changes will be separate.
Reviewed by: allanjude
Approved by: allanjude
Differential Revision: https://reviews.freebsd.org/D34878
Sponsored by: Rubicon Communications, LLC ("Netgate")
Devices that cannot be opened are most likely the install media and
should not be listed as destinations.
Reviewed by: allanjude
Approved by: allanjude
Differential Revision: https://reviews.freebsd.org/D34879
Sponsored by: Rubicon Communications, LLC ("Netgate")
Leave -Wcast-align disabled, at least for now, since there are numerous
instances of that warning in places where buffer pointers are cast to
pointers to various filesystem structures. Fixing this properly would
be too much work for too little gain.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This patch adds logging of the version of TLS and cipher
negotiated successfully by the TLS handshake for each client,
if the "-v" command line option has been specified.
This information may be useful for monitoring and debugging
NFS-over-TLS mounts.
MFC after: 2 weeks
virtio-console is currently missing .pe_legacy_config, which prevents any
portN configuration from being parsed, and therefore no sockets will be
created.
Reviewed by: khng
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35142
The "C" option in the argument to getopt_long() was
missing a ":" for both rpc.tlsclntd.c and rpc.tlsservd.c.
This patch fixes this.
MFC after: 2 weeks
rpc.tlsclntd has a -C command line option for setting
preferred_ciphers. Testing at a recent IETF NFSv4 testing
event showed that setting preferred_ciphers is not normally
needed for the rpc.tlsservd.
This patch modifies rpc.tlsservd to not specify preferred_ciphers
by default, but provides the same -C option as rpc.tlsclntd to
set preferred_ciphers, in case it is needed.
The man page update will be done as a separate commit.
MFC after: 2 weeks
When running zpool export first, boot/efi and dev is still mounted so
zpool export fails. By running bsdinstall umount first the pool can be
cleanly exported.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D35114
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC After: 3 days
Throughout the bsdinstall script fd 3 is used by f_dprintf (set through
$TERMINAL_STDOUT_PASSTHRU). By closing file descriptor 3 here, the
final f_dprintf "Installation Completed ... does not work anymore.
By putting the code into a subshell, file descriptors can be edited
without interference with the calling script.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D35113
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 3 days
Sometimes the parent-child sshd protocol changes during an upgrade, and
when this happens sshd will not accept new connections until it is
restarted.
PR: 263489
Reviewed by: kevans, gjb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35109
After an installation restart (for error or choice) dhclient does not
rebuild resolv.conf so `dialog --mixedform' of "Resolver Configuration"
in bsdinstall/scripts/netconfig draws empty forms. It causes a bad UX,
to see PR262262. Fixed resetting the interface before to run dhclient.
PR: 262262
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D35094
Fix bsdinstall "Auto (UFS) Guided Disk Setup" and sade(8) "Auto".
The problem is a string comparison failure, it arose during the
dialog(3)/bsddialog(3) form conversion:
* dialog uses only form.text while bsdialog differentiates between
form.init and form.value.
* dialog always allocates memory for form values while bsddialog only
when a button is pressed.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D35033
